Inconel X750 plate suppliers

Alloy X750 Sheet, N07750 plate suppliers in Mumbai

Buy Inconel X750 coil, nickel alloy 750 sheets, astm b637 uns n07750 at best price in India

Inconel X750 Plate has good resistance to corrosion and oxidation along with high tensile and creep rupture properties at temperature up to 1300ºF (700ºC). Alloy X750 Plate is designated as UNS N07750 and Werkstoff Number 2.4669. Inconel Alloy X750 Plate also known from its specification like as Nicrofer 7016 Plate, Superimphy 750 Plate, Haynes X750 Plate, Pyromet X750 Plate, and Udimet X750 Plate, Nickelvac®X750 Plate, Nicorros® 7016 Plate. Cutting of Inconel X750 Coil is often done with a waterjet cutter. Internal threads can also be cut by single point method on lathe, or by threadmilling on a machining center. Inconel X750 Flat Shim, Inconel X750 Perforated Plate, Inconel X750 Cold rolled Plate, Inconel X750 Foil, Inconel X750 Rolling Sheets & Inconel X750 Rolling Plate can be cold formed by standards methods.

Looking for best price of Inconel X750 Clad Plate in India? We have no minimum footage requirements. We will supply the exact amount of Inconel X750 Shim you require even if it’s small quantity of Inconel X750 Strip. Contact Steel Tubes India- the right supplier of Inconel X750 Flat Sheet near you.

Steel Tubes India offers one of the widest ranges of Alloy X750 sheet and Alloy X750 plate in various qualities, sizes and grades which are equivalent to Inconel X750 Sheet & Inconel X750 Plate (2mm to 12mm). Inconel X750 Sheet is available in thicknesses ranging from .016 to .156". Large size Inconel X750 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Inconel X750 Sheets, thin and ultra-thin gauge Inconel Alloy X750 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Inconel X750 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Inconel X750 Polished Plate by pickling or buff-polishing. Inconel X750 Strips levels of finishing & cut can be adjusted according to your requirements. Inconel X750 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Inconel X750 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Inconel X750 plates based on dimensions and shape. Inconel X750 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in India arrange complete range of Inconel X750 plates in shortest time as well at best price, because we maintain Inconel X750 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Inconel X750 sheet from any other vendor or Manufacturer of mirror finish Inconel X750 plate in India.

Distributor of Inconel X750 Clad Plate, Inconel X750 Sheet in Mumbai, India

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 Inconel X750 plate Weight Calculator  Project Reference list

Inconel X750 Plate Price

Inconel X750 Sheet Price List

Inconel X750 Sheet Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
Inconel X750 Sheet Price in India	Indian	Rs 5500/-	$80	€68	Cut to Size
Inconel X750 Sheet Price in Japan	Japanese	Rs 6200/-	$91	€78	Fix Length
Inconel X750 Sheet Price in UK / Europe	European	Rs 6900/-	$101	€87	Fix Length
Inconel X750 Sheet Price in USA	USA	Rs 7500/-	$110	€94	Fix Length

Please note: Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Inconel X750 Price per Kg

Inconel X750 Sheet Stock, X750 rolling sheets supplier, Inconel alloy X750 flat sheet suppliers in India

Alloy X750 plate Specification

Inconel Alloy X-750 AMS 5542, AMS 5598

• UNS N07750
• AMS 5598
• AMS 5542
• ASTM B 637
• ASME SB 637
• W.Nr 2.4669
• PWA-LCS
• GE-S400/1000
• RR SABRe Edition 2
• DFARS Compliant

Common Trade Names

• ATI X-750 (™ Allegheny Technologies)
• Inconel Alloy X-750  (® Special Metals)

Inconel X750 Sheet ASTM Specification	ASTM B637 UNS N07750, ASME SB637, AMS 5542, AMS 5598, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747, ASTM-B-637, UNS N07750, B50A714, B50A151, MIL-N-7786
Alloy X750 Plate Specification	MSRR, AMS, BS, ASTM B637 / ASME SB637
Inconel X750 Plate Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Inconel X750 Plate Thickness	0.1mm to 100 mm Thk
Inconel X750 Plate Width	10-2500mm
Inconel X750 Sheet AMS	AMS 5542, AMS 5598, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747
Inconel X750 Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Inconel X750 Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Inconel X750 Plate Stock in form of	Alloy X750 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Inconel X750 Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Inconel X750 plate
Inconel X750 profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Inconel X750 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Inconel X750 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Inconel X750 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Inconel X750 Clad plate: Inconel X750 Clad plate is a composite steel plate made by bonding Inconel X750 plate, etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Inconel X750 Plate Properties & Applications

With regards to Inconel X750 plate properties & applications, Inconel X750 plate properties are that, up to a temperature of 700 ºC (1300 ºF), it has creep rupture and high tensile strength. Inconel X750 plates offer superb resistance to oxidation and corrosion. Inconel X750 plates are used in many applications like rocket engines, aircraft structures, gas turbines, tooling structures, pressure vessels, high-temperature bolts and springs, nuclear reactors, etc.

Types of Inconel X750 Plate

Difference between Inconel X750 Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Inconel X750 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Inconel X750 Sheet.

If thickness less than 0.15mm is then its a Inconel X750 Foil.

Inconel X750 Plate Properties

Inconel X750 Plate mechanical properties

Inconel X-750 Sheets, Plates & Coils Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Inconel X-750	2.4669	N07750

Inconel Alloy X-750 Sheets & Plates Chemical Composition

Grade	Ni	Cr	Al	C	Mn	Ti	Cu	Si	S
Inconel X-750	70.0 min	14.0 - 17.0	0.40 - 1.0	.08 max	1.00 max	2.25 - 2.75	0.50 max	.50 max	.01 max

Inconel Alloy X-750 Strips, Sheets & Plates Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.28 g/cm3	1430°C	1267 MPa	868 MPa	25 %

Inconel X750 Sheet Sizes

Sizes in Inches	Sizes in mm
.125"	3.18mm
.134"	3.40mm
.156"	3.96mm
.187"	4.75mm
.250"	6.35mm
.312"	7.92mm
.375"	9.53mm
.500"	12.7mm
.625"	15.9mm
.750"	19.1mm
.875"	22.2mm
1"	25.4mm
1.125"	28.6mm
1.250"	31.8mm
1.500"	38.1mm
1.750"	44.5mm
2"	50.8mm
2.500"	63.5mm
3"	76.2mm

Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Imperial Dimensions

Surface finish	Gauge (in)	Width (in)
2B – Cold rolled, heat treated, pickled, skin passed	10–24	max. 72*
2D – Cold rolled, heat treated, pickled	12–24	max. 60
BA Mexinox only	18–28	max. 48
Polished (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

An estimated delivery time location wise for Inconel X750 Sheet & Plate

Country	Days	Country	Days
USA	45	Canada	45
Australia	30	UK	35
Malaysia	15	Poland	15
Iran	7	Singapore	14
Vietnam	20	Albania	20
UAE	15	Thailand	20
Nigeria	40	Ethiopia	40
Turkey	30	Tanzania	30
Bahrain	15	Kenya	40
Libya	40	Syria	40
Zambia	40	Egypt	40
Italy	40	India	7
Saudi Arabia	15	Qatar	15
Namibia	40	Indonesia	20
South Africa	40	Australia	40
Uganda	40	Angola	40
Kazakhstan	20	Algeria	20

Inconel alloy X750 strip distributor, Inconel X750 cold rolled plate stockist in Mumbai

---

lloy X750 slitting coil, Inconel Alloy X750 Flat Sheet, Inconel X750 Polished Plate in Mumbai, India