90/10 Copper Nickel Plate

Cuni 90/10 Sheet, C70600 Sheet Suppliers in India

Buy ASTM B122 UNS C70600 , 90/10 Copper Nickel Plate, Cuni 90/10 Sheet, C70600 Plate & C70600 Sheet at best price in Mumbai, India

C70600 (C706) & C71500 (C715), 90/10 Copper Nickel Sheet, with an official alloy designation of UNS C70600, has a nominal chemical composition of 10% nickel, 1.4% iron, and 88.6% copper. Cuni 90/10 Sheet (C70600, CW352H), an alloy with 90% copper and 10% nickel, is the most commonly used alloy. Cuni 90/10 Coil (C70600) can be found in naval and commercial shipping, offshore oil and gas production as well as desalination and power generation. 90/10 cupronickel Shim is a combination of 90% copper, 10% nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance. The most popular specifications in Europe and America are C70600, CN102 and CW352. These Cuni 90/10 Plate & 90/10 Cupro Nickel Clad Plate are most commonly specified within the marine, offshore, chemical, petrochemical and shipbuilding industries and are also widely used for handling seawater in all types of heat exchanger and cooling plant.

We have our stockholders in India who maintain stock of Cuni 90/10 Strip and other types of Copper Nickel 90/10 Plate in regular sizes. Our Distributor in India are in following locations: Mumbai, Delhi, Bangalore, Hyderabad, Surat, Pune, Nagpur, Indore, Ahmedabad, Chennai, Kolkata, Thane, Vadodara, Nashik, Bhopal, Visakhapatnam, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Kochi (Cochin), Bhavnagar, Tirupur, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Ankleshwar, Assam and Siliguri. You can contact them directly for best price & exact delivery time for required size of Copper Nickel 90/10 Rolling Plate near you.

Our latest Price list of Cuni 90/10 Rolling Sheets size wise will match the price list provided by our other sales locations in India, for your reference you can ask Copper Nickel 90/10 Flat Sheet price list by mail to stindia@stindia.com. So we can provide within 4 hours along with the actual photographs of Cupro Nickel 90/10 Sheet material. Our price of Cupro Nickel 90/10 Plate is 2% cheaper in Gujarat compare to Maharashtra because we have our stockyard in Ahmedabad, Gujarat.

Steel Tubes India offers one of the widest ranges of Cupro Nickel 90/10 sheet and Cupro Nickel 90/10 plate in various qualities, sizes and grades which are equivalent to Copper Nickel 90/10 Sheet & Copper Nickel 90/10 Plate (2mm to 12mm). Copper Nickel 90/10 Sheet is available in thicknesses ranging from .016 to .156". Large size Copper Nickel 90/10 Plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Copper Nickel 90/10 Sheets, thin and ultra-thin gauge 90/10 Copper Nickel strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of 90/10 Copper Nickel Plate in uniformly of excellent quality. We apply the process of surface finishing to our Cu Ni 90 10 Plate by pickling or buff-polishing. Copper Nickel 90/10 Strips levels of finishing & cut can be adjusted according to your requirements. 90/10 Cupro Nickel plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Copper Nickel 90/10 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of C70600 Sheet based on dimensions and shape. Cu Ni 90 10 Plate is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Copper Nickel 90/10 plates in shortest time as well at best price, because we maintain Copper Nickel 90/10 Sheet in stock for sale, so it saves time & cost to procure any size range in 90 10 Cu Ni Plate from any other vendor or Manufacturer of C70600 Plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 Copper Nickel 90/10 Plate Weight Calculator 

Copper Nickel 90/10 Plate Price

Copper Nickel 90/10 Sheet Price Per Kg

ASTM B122 UNS C70600 Plate Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
90 10 Cu Ni Plate Price in India	Indian	Rs 400/-	$6	€4	Cut to Size
C70600 Plate Price in Japan	Japanese	Rs 650/-	$9	€8	Fix Length
C70600 Sheet Price in UK / Europe	European	Rs 850/-	$12	€10	Fix Length
Copper Nickel 90/10 Sheet Price in USA	USA	Rs 1000/-	$14	€12	Fix Length

90/10 Copper Nickel Plate Price in India

Thickness	Width	Length	Price
10ga	1"	10"	$1.50–$648.00
16ga	1"	10"	$1.50–$608.00
20ga	1"	10"	$1.50–$608.00
22ga	1"	10"	$1.50–$608.00
24ga	1"	10"	$1.50–$640.00
1/8"	1"	10"	$1.50–$640.00
1/4"	1"	10"	$1.50–$640.00

Please note: Price is subject to change without any prior notice.

Cu Ni 90 10 Plate Specification

ASTM B151, CuNi, ASTM B466, ASTM B111, ASTM B171, ASME SB466, ASME SB111, ASME SB151, ASME SB171, DIN 2.0872, BS 2871 CN102, EN CW352H, MIL-C-1726F, MIL-C-24679, MIL-T-16420K

End Product	Specification
Copper Nickel 90/10 Plate	ASTM B122, MILITARY MIL-C-15726
Copper Nickel 90/10 Plate, Clad	ASTM B432
Copper Nickel 90/10 Plate, Condenser Tube	ASME SB171, ASTM B171, SAE J463, J461
Copper Nickel 90/10 Sheet	ASTM B122, MILITARY MIL-C-15726, SAE J463, J461
Copper Nickel 90/10 Strip	ASTM B122, MILITARY MIL-C-15726

Copper Nickel 90/10 Sheet ASTM Specification	ASTM B122 UNS C70600, ASME SB122
Cupro Nickel 90/10 Plate Specification	MSRR, AMS, BS, ASTM B122 / ASME SB122
Copper Nickel 90/10 Plate Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Copper Nickel 90/10 Plate Thickness	0.1mm to 100 mm Thk
Copper Nickel 90/10 Plate Width	10-2500mm
Copper Nickel 90/10 Sheet AMS	AMS
Copper Nickel 90/10 Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Copper Nickel 90/10 Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Copper Nickel 90/10 Plate Stock in form of	Cupro Nickel 90/10 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Copper Nickel 90/10 Plate Dimensions
High Quality Copper Nickel 90/10 Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Copper Nickel 90/10 Plate
Copper Nickel 90/10 profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Copper Nickel 90/10 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Copper Nickel 90/10 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Copper Nickel 90/10 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Copper Nickel 90/10 Clad plate: Copper Nickel 90/10 Clad plate is a composite steel plate made by bonding Copper Nickel 90/10 plate, etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Copper Nickel 90/10 Plate Stock

Key Features of 90/10 Copper Nickel Plate

• Copper Nickel 90/10 Flat Shim has high ductility and toughness
• Copper Nickel 90/10 Perforated Plate are excellent resistance to erosion and corrosion in seawater
• Copper Nickel 90/10 Hot rolled Plate has Inherent resistance to biofouling
• Copper Nickel 90/10 Cold rolled Plate are excellent fabrication and welding properties
• Retention of mechanical properties down to cryogenic temperatures

Specialized of:

Cuni 90/10 Clad Plate
Cuni 90/10 Shim
Cuni 90/10 Rolling Sheets
Copper Nickel 90/10 Flat Sheet
Copper Nickel 90/10 Rolling Plate
Copper Nickel 90/10 Flat Shim
Copper Nickel 90/10 Perforated Plate
Copper Nickel 90/10 Hot rolled Plate
Copper Nickel 90/10 Cold rolled Plate

Difference between Copper Nickel 90/10 Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Copper Nickel 90/10 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Copper Nickel 90/10 Sheet.

If thickness less than 0.15mm is then its a Copper Nickel 90/10 Foil.

Copper Nickel 90/10 Plate Properties

Copper Nickel 90/10 Plate mechanical properties

C70600 Plate

Fabrication Properties

Joining Technique	Suitability
Soldering	Excellent
Brazing	Excellent
Oxyacetylene Welding	Fair
Gas Shielded Arc Welding	Excellent
Coated Metal Arc Welding	Good
Spot Weld	Good
Seam Weld	Good
Butt Weld	Excellent
Capacity for Being Cold Worked	Good
Capacity for Being Hot Formed	Good
Machinability Rating	20

ASTM Standard Designation for C70600: ASTM B171
ASME Standard Designation for C70600: ASME SB171

Meets Mil-C-15726F, AM. 1

Cupro Nickel 90/10 Plate, Sheet & Coil Chemical Composition

Grade	Cu	Mn	Pb	Ni	Fe	Zn
Cupro Nickel 90/10	88.6 min	1.0 max	0.05 max	9-11 max	1.8 max	1 max

Cupro Nickel 90/10 Sheets, Plates & Coils Mechanical Properties

Grade	Cu	Mn	Pb	Ni	Fe	Zn
Cupro Nickel 90/10	88.6 min	1.0 max	0.05 max	9-11 max	1.8 max	1 max

Equivalent Grades for 90/10 Cupro Nickel Sheets & Plates

STANDARD	WERKSTOFF NR.	UNS
Cupro Nickel 90/10	2.0872	C70600

90/10 Copper Nickel Plate Sizes

Sizes in Inches	Sizes in mm
.125"	3.18
.134"	3.40
.156"	3.96
.187"	4.75
.250"	6.35
.312"	7.92
.375"	9.53
.500"	12.7
.625"	15.9
.750"	19.1
.875"	22.2
1"	25.4
1.125"	28.6
1.250"	31.8
1.500"	38.1
1.750"	44.5
2"	50.8
2.500"	63.5
3"	76.2

Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Imperial Dimensions

Surface finish	Gauge (in)	Width (in)
2B – Cold rolled, heat treated, pickled, skin passed	10–24	max. 72*
2D – Cold rolled, heat treated, pickled	12–24	max. 60
BA Mexinox only	18–28	max. 48
Polished (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

An estimated delivery time location wise for Copper Nickel 90/10 Plate

Country	Days	Country	Days
USA	45	Canada	45
Australia	30	UK	35
Malaysia	15	Poland	15
Iran	7	Singapore	14
Vietnam	20	Albania	20
UAE	15	Thailand	20
Nigeria	40	Ethiopia	40
Turkey	30	Tanzania	30
Bahrain	15	Kenya	40
Libya	40	Syria	40
Zambia	40	Egypt	40
Italy	40	India	7
Saudi Arabia	15	Qatar	15
Namibia	40	Indonesia	20
South Africa	40	Australia	40
Uganda	40	Angola	40
Kazakhstan	20	Algeria	20

90/10 Copper Nickel Plate suppliers

---

Cuni 90/10 Sheet suppliers, 90 10 Cu Ni Plate manufacturer in India