Copper nickel 90/10 round bar suppliers
Manufacturer of Cuni 90/10 busbar and Rod, ASTM B151 CuNi 90/10 Flat Bar
1/4 inch Solid Copper Nickel 90/10 Rod, 90/10 CU-NI DIN 2.0872 Hex Bar Price in India

Copper Nickel 90/10 Round Bar

Copper Nickel 90/10 Hex Bar

Copper Nickel 90/10 Square Bar
Copper Nickel 90/10 Round Bar (C70600, CW352H), an alloy with 90% copper and 10% nickel, is the most commonly used alloy. 90/10 Cu-Ni Hex Bar can be found in naval and commercial shipping, offshore oil and gas production as well as desalination and power generation. 90/10 cupronickel round bar is a combination of 90% copper, 10% nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance. The most popular specifications in Europe and America are C70600, CN102 and CW352. These Cuni 90/10 Bar & 90/10 Cupro Nickel Hollow Bar are most commonly specified within the marine, offshore, chemical, petrochemical and shipbuilding industries and are also widely used for handling seawater in all types of heat exchanger and cooling plant.
We at Steel Tubes India stocking various Sizes and diameter C70600 CuNi 90/10 Polished Bar, We are distributor of Copper Nickel 90/10 Hexagonal Bar and 90/10 Cu-Ni Welding Rod in India.We have our Dealer & Distributor of Copper Nickel 90/10 Forged Bar, Copper Nickel 90/10 Threaded Bars as Cold Drawn, Centre less Ground & Polished, Peeled, Smooth turned or Rough turned globally.
We have our stockholders in India who maintain stock of CuNi 90/10 Square Bar and other types of Copper Nickel 90/10 Hex Rod or Copper Nickel 90/10 Hollow Bar shapes. Our Distributor in India are in following locations: Mumbai, Delhi, Bangalore, Hyderabad, Surat, Pune, Nagpur, Indore, Ahmedabad, Chennai, Kolkata, Thane, Vadodara, Nashik, Bhopal, Visakhapatnam, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Kochi (Cochin), Bhavnagar, Tirupur, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Ankleshwar, Assam and Siliguri. You can contact them directly for best price & exact delivery time supplier of CuNi 90/10 Rod near you.
Steel Tubes India is manufacturer & stockist of Copper Nickel 90/10 bars, Copper Nickel 90/10 Bright Round Metric (BRM), Copper Nickel 90/10 shaft bars for use in Valve Shafts, Piston Shafts, Pump Shaft, Cylinder Shafts, Boat Shafts and Bearing Bars. 90/10 Cu-Ni Drawn bars have greater size accuracy, straightness, and increased tensile and yield strength, as well as improved machinability. In addition to standard CU-NI DIN 2.0872 cold drawn bars, it can be supplied as turned and polished, turned ground and polished and drawn ground and polished in shape of square, hexagonal and flat bars. Our custom Copper Nickel 90/10 Forged Bars & Copper Nickel 90/10 Forged round bars are suited for multiple applications and serve a variety of different industries. These Copper Nickel 90/10 Forged Bar, Copper Nickel 90/10 Forged stepped shafts, CuNi 90/10 Forged Flat Bars & 90/10 Copper Nickel Forged Square Bars tend to be stronger than Copper Nickel 90/10 rolled bars due to the solid forged center that is provided via the forging process.
Our Dealers & Distributors in Europe, Trinidad & Tobago, Singapore, Qatar, Ethiopia, United Arab Emirates, Oman, Malaysia, Kuwait, Canada, Australia, United States, New Zealand, United Kingdom, Germany, St. Helena, South Africa, India, Nigeria, Ghana, Hong Kong, Saudi Arabia, Philippines, Ireland, Pakistan, South Korea, Iraq, Norway, Finland, Egypt, Netherlands, Denmark, Iran, Kenya, Sweden, Thailand, India, Belgium, Taiwan, Greece & Indonesia arrange complete range of Copper Nickel 90/10 flat bar & Copper Nickel 90/10 Rebar in shortest time as well at best price, because we maintain Copper Nickel 90/10 Bar in the form of Rod, Round Bar, Bright Bar, Flat Bar, Hex Bar, Square Bar, Block, Threaded Bar, Ingot, Shaft, Billet, Straight Forging and Extruded Section in stock for sale, so it saves time & cost to procure any size range in Copper Nickel 90/10 Black Bar stock in rounds, square and flats from any other vendor or Manufacturer of Hot Rolled Copper Nickel 90/10 Round Bar in India. We also offer Cupro Nickel 90/10 Bright Round Bar lengths are cut, straightened again and the ends are chamfered before the UNS C70600 Bar is polished and tested.
Our online Copper Nickel 90/10 Round Bar Weight Calculator allows you to calculate an estimate of the weight of different sizes of Copper Nickel 90/10 round bars, Copper Nickel 90/10 Cold Drawn Round Bar, Copper Nickel 90/10 Bright Round Bar or Copper Nickel 90/10 Metric Bright Round Bar based on dimensions and shape. Check below table of Copper Nickel 90/10 Bright Bar sizing chart which shows nominal size and provides convenient weight data.
Copper Nickel 90/10 Half Round Bar combines excellent mechanical properties, strength, corrosion resistance, and ease of welding. Copper Nickel 90/10 Round Bars & Copper Nickel 90/10 Bright Round Bars are mainly use when the highest level of accuracy and precision are needed along with a bright finish.
Steel Tubes India is supplier of Cuni 90/10 Round Rods as Cold Drawn, Centre less Ground & Polished, Peeled, Smooth turned or Rough turned.. We are stocking distributor of Cuni 90/10 Peeled Bar. We offer best price of Cuni 90/10 Bars in India & Europe. Special price offer on Cuni 90/10 Rectangular Bar and Cuni 90/10 octagonal Bar. Cuni 90/10 Bright Bar, Cuni 90/10 Flat Bar and large diameter Cuni 90/10 round bar are available in more than 60 types of thickness & sizes. Buy Cuni 90/10 Bright Ground Bar stock at best price. Compare our Cuni 90/10 Rod price with 90/10 Copper Nickel Round Bars price in China.
Looking to buy Alloy 718 Round Bar? Inconel 718 Round Bar?
Check price of Inconel 718 Round Bar in India

Copper Nickel 90/10 Round Bar Specification
End Product | Specification |
Copper Nickel 90/10 Bar | ASTM B151, B122, MILITARY MIL-C-15726 |
Copper Nickel 90/10 Rod | ASTM B151, MILITARY MIL-C-15726 |
Copper Nickel 90/10 Rod, Welding | AWS A5.15 |
Grade | UNS C70600 |
---|---|
Specification | ASTM B151, ASME SB151 |
Round bar size | Diameter: 3mm~800mm |
Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Square bar size | 4mm*4mm~100mm*100mm |
Flat bar size | Thickness: 2mm~100mm |
Width: 10mm~500mm | |
Hex Bar size | 2mm~100mm |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33mm x 30mm to 295mm x 1066mm |
Finish | Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
Technique | Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
Bar Type | Drawn Bar, Rolled Bar, Forged Bar, GFM Forged Bar, Open Die Bar, Forged Stepped Shafts, Forged Flat Bar, Forged Square Bar |
Form | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc. |
Our Round Bar conforms to NACE MR0175/ISO 15156 |
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTM B151 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTM B151 |
Types of Copper Nickel 90/10 Bar

Copper Nickel 90/10 Rectangular Bar

Copper Nickel 90/10 Flat Bar

Copper Nickel 90/10 Square Bar

Copper Nickel 90/10 Rounds

Copper Nickel 90/10 T-Bar

Copper Nickel 90/10 Half-Round Bar

Copper Nickel 90/10 Bright Bar

Copper Nickel 90/10 Hexagonal Bar

Copper Nickel 90/10 Threaded Bar

Copper Nickel 90/10 Rebar

Copper Nickel 90/10 Hollow Bar

Copper Nickel 90/10 Precision Ground Bar

Copper Nickel 90/10 Busbar

Copper Nickel 90/10 Triangle bar

Copper Nickel 90/10 Hex Bar

Copper Nickel 90/10 Rod
Value Added services for Copper Nickel 90/10 Round Bar:
The Difference Between Copper Nickel 90/10 Round Bar and Copper Nickel 90/10 Precision Ground Bar
Copper Nickel 90/10 Round bar is exactly as it sounds; a long, cylindrical metal bar. Copper Nickel 90/10 Round bar is available in many different diameters ranging from 1/4" up to 24".
Copper Nickel 90/10 Precision ground bar is manufactured through induction hardening. Induction hardening is a non-contact heating process which uses electromagnetic induction to produce the required heat. Copper Nickel 90/10 Centerless ground bar is typically produced by turning and grinding the surface to a specified size.
Copper Nickel 90/10 Precision Ground Bar, also known as ‘Turned Ground and Polished’ shafting, refers to round bars made with fine precision and high-quality steel. They are polished to ensure flawless and perfectly straight surfaces. The manufacturing process is designed for extremely close tolerances for surface finish, roundness, hardness, and straightness which ensures a long service life with reduced maintenance.
Cu-Ni 90/10 Bar Delivery condition
- Cold drawn Copper Nickel 90/10 Round Bar
- The strain Hardened
- Peeled, center less ground & polished
- Turned & rough polished Copper Nickel 90/10 RoundBar
- Trailed center less ground & polished
- Peeled and polished Copper Nickel 90/10 Rod
- Smooth Turned & Polished CuNi 90/10 Bar
- Solenoid quality
- Annealed Copper Nickel 90/10 Black Bar
- Hardened strain CuNi 90/10 Round Bar
Copper Nickel 90/10 Round Bar Price
Diameter | Length | Price |
---|---|---|
1/4" Dia Copper Nickel 90/10 Round Rod | 36" | $15.99 |
1/4" Dia Copper Nickel 90/10 Round Rod | 72" | $30.73 |
3/8" Dia Copper Nickel 90/10 Round Rod | 12" | $14.99 |
3/8" Dia Copper Nickel 90/10 Round Rod | 36" | $22.97 |
3/8" Dia Copper Nickel 90/10 Round Rod | 72" | $44.70 |
7/16" Dia Copper Nickel 90/10 Round Rod | 12" | $15.99 |
7/16" Dia Copper Nickel 90/10 Round Rod | 36" | $27.96 |
7/16" Dia Copper Nickel 90/10 Round Rod | 72" | $63.66 |
1/2" Dia Copper Nickel 90/10 Round Rod | 12" | $17.98 |
1/2" Dia Copper Nickel 90/10 Round Rod | 36" | $32.95 |
1/2" Dia Copper Nickel 90/10 Round Rod | 72" | $64.66 |
5/8" Dia Copper Nickel 90/10 Round Rod | 12" | $21.98 |
5/8" Dia Copper Nickel 90/10 Round Rod | 36" | $45.93 |
5/8" Dia Copper Nickel 90/10 Round Rod | 72" | $90.61 |
3/4" Dia Copper Nickel 90/10 Round Rod | 12" | $26.97 |
3/4" Dia Copper Nickel 90/10 Round Rod | 36" | $61.90 |
3/4" Dia Copper Nickel 90/10 Round Rod | 72" | $121.54 |
1" Dia Copper Nickel 90/10 Round Rod | 6" | $24.97 |
1" Dia Copper Nickel 90/10 Round Rod | 12" | $40.94 |
1" Dia Copper Nickel 90/10 Round Rod | 36" | $101.82 |
1" Dia Copper Nickel 90/10 Round Rod | 72" | $185.40 |
1 1/8" Dia Copper Nickel 90/10 Round Bar | 6" | $28.96 |
1 1/8" Dia Copper Nickel 90/10 Round Bar | 12" | $48.92 |
1 1/8" Dia Copper Nickel 90/10 Round Bar | 36" | $115.64 |
1 1/8" Dia Copper Nickel 90/10 Round Bar | 72" | $229.12 |
1 1/2" Dia Copper Nickel 90/10 Round Bar | 6" | $43.93 |
1 1/2" Dia Copper Nickel 90/10 Round Bar | 12" | $77.86 |
1 1/2" Dia Copper Nickel 90/10 Round Bar | 36" | $196.69 |
1 1/2" Dia Copper Nickel 90/10 Round Bar | 72" | $359.80 |
1 3/4" Dia Copper Nickel 90/10 Round Bar | 6" | $59.90 |
1 3/4" Dia Copper Nickel 90/10 Round Bar | 12" | $102.81 |
1 3/4" Dia Copper Nickel 90/10 Round Bar | 36" | $264.99 |
1 3/4" Dia Copper Nickel 90/10 Round Bar | 72" | $483.74 |
Copper Nickel 90/10 bar properties
C70600 Round Bar
Joining Technique |
Suitability |
---|---|
Soldering |
Excellent |
Brazing |
Excellent |
Oxyacetylene Welding |
Fair |
Gas Shielded Arc Welding |
Excellent |
Coated Metal Arc Welding |
Good |
Spot Weld |
Good |
Seam Weld |
Good |
Butt Weld |
Excellent |
Capacity for Being Cold Worked |
Good |
Capacity for Being Hot Formed |
Good |
Machinability Rating |
20 |
ASTM Standard Designation for C70600: ASTM B151
ASME Standard Designation for C70600: ASME SB151
Meets Mil-C-15726F, AM. 1
90/10 Cupro Nickel Round Bar Chemical Composition
Cu(1) |
Fe |
Pb |
Mn |
Ni(2) |
Zn |
|
---|---|---|---|---|---|---|
Min./Max. |
Rem. |
1.0-1.8 |
.05 |
1.0 |
9.0-11.0 |
1.0 |
Nominal |
88.6 |
1.4 |
- |
- |
10.0 |
- |
Cupro Nickel 90/10 Rods Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Equivalent Grades for 90/10 Cupro Nickel Round Bar
STANDARD | WERKSTOFF NR. | UNS |
Cupro Nickel 90/10 | 2.0872 | C70600 |
An estimated delivery time location wise for Cuni Rod
Country | Days | Country | Days |
---|---|---|---|
USA | 45 | Canada | 45 |
Australia | 30 | UK | 35 |
Malaysia | 15 | Poland | 15 |
Iran | 7 | Singapore | 14 |
Vietnam | 20 | Albania | 20 |
UAE | 15 | Thailand | 20 |
Nigeria | 40 | Ethiopia | 40 |
Turkey | 30 | Tanzania | 30 |
Bahrain | 15 | Kenya | 40 |
Libya | 40 | Syria | 40 |
Zambia | 40 | Egypt | 40 |
Italy | 40 | India | 7 |
Saudi Arabia | 15 | Qatar | 15 |
Namibia | 40 | Indonesia | 20 |
South Africa | 40 | Australia | 40 |
Uganda | 40 | Angola | 40 |
Kazakhstan | 20 | Algeria | 20 |