Grade 3 Titanium Sheet supplier
SB 265 gr 3, CP Grade 3 Titanium Plate and Titanium Cp Grade 3 Strip distributor in India
Buy Titanium CP2 Grade 3 Coil, Grade 3 Titanium Alloy Shim Stock, (3.7055) Cp Ti Gr.3 Foil Sheet, Ti R50550 Perforated Sheet at Best price

CP Grade 3 Titanium Plate

Grade 3 Titanium Sheet

Cp Ti Grade 3 Foil Sheet
Grade 3 Titanium Sheet is a commercially pure form of titanium. CP (Commercially Pure) Titanium Grade 3 Flat Sheet is unalloyed titanium providing higher mechanical strength (typical yield strength 462 MPa) compared with CP Grades 1 Ti Plate and Ti Grade 2 Sheet. CP Grade 3 Titanium Plate has moderate ductility, excellent weldability and superior corrosion resistance. CP Grade 3 Titanium Sheet again promotes versatility of use and with higher mechanical strength, is used in industrial applications where improved mechanical properties are required. Titanium Cp Grade 3 Strip are suitable for a large variety of chemical and marine as well as aerospace and medical applications where strength is a consideration. Titanium Grade 3 Rolling Sheets is an unalloyed, high strength, titanium product providing excellent corrosion resistance and good weldability. unalloyed UNS R50550 Ti Grade 3 Sheet, CP Grade 3 Titanium Sheet can be cold formed by standards methods.
Looking for best price of Titanium Alloy Grade 3 Plate in India? We have no minimum footage requirements. We will supply the exact amount of Titanium CP2 Grade 3 Coil you require even if it’s small quantity of Grade 3 Titanium Alloy Shim Stock. Contact Steel Tubes India- the right supplier of Cp Ti Grade 3 Foil Sheet near you.
Steel Tubes India offers one of the widest ranges of Titan-Grade 3 Flat Sheet (3.7055) and Ti Grade 3 R50550 Perforated Sheet in various qualities, sizes and grades which are equivalent to Titanium grade 3 Sheet & Titanium grade 3 Plate (2mm to 12mm). Titanium grade 3 Sheet is available in thicknesses ranging from .016 to .156". Large size Titanium grade 3 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Titanium grade 3 Sheets, thin and ultra-thin gauge Ti. Alloy Grade 3 strip and foil products, rolled down to 2 microns.
Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Ti Grade 3 R50550 Perforated Sheet in uniformly of excellent quality. We apply the process of surface finishing to our CP Grade 3 Titanium Rolling Sheet by pickling or buff-polishing. SB 265 gr 3 Strips levels of finishing & cut can be adjusted according to your requirements. Titanium grade 3 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Titanium grade 3 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Cp Titanium Grade 3 Thin Sheet based on dimensions and shape. These sheets are sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.
Our Titanium CP2 Grade 3 Welding Sheet Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Grade 3 Titanium Alloy Clad Plate in shortest time as well at best price, because we maintain Titanium Cp Grade 3 Armor Plate in stock for sale, so it saves time & cost to procure any size range in Ti Grade 3 Sheet Plate from any other vendor or Manufacturer of Cp Ti Grade 3 Mesh Plate & mirror finish Titanium grade 3 plate in India.
Table of contents
- CP Grade 3 Titanium Plate Price
- Grade 3 Titanium Sheet Strength
- Titanium CP2 Grade 3 Sheet Specification
- Titanium Cp Grade 3 plate Thickness
- Grade 3 Titanium Alloy Plate Stock
- SB 265 gr 3 Titanium Sheet Weight Chart
- Ti Grade 3 Plate Dimensions
- Titanium grade 3 Sheet Properties
- Difference Between Inconel and Titanium
Looking to buy Inconel Plate? Inconel Sheet?
Check price of Inconel Plate in India

CP Grade 3 Titanium Plate Price
Titanium grade 3 Sheet Price List
Titanium Grade 3 Sheet Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Titanium Grade 3 Sheet Price in India | Indian | Rs 1300/- | $18 | €16 | Cut to Size |
Titanium Grade 3 Sheet Price in Japan | Japanese | Rs 1600/- | $24 | €20 | Fix Length |
Titanium Grade 3 Sheet Price in UK / Europe | European | Rs 1750/- | $26 | €22 | Fix Length |
Titanium Grade 3 Sheet Price in USA | USA | Rs 1800/- | $27 | €23 | Fix Length |
Please note: Price is subject to change without any prior notice.
Click here to check complete (grade & size wise)
Grade 3 Titanium Sheet Strength
Grade 3 titanium sheet strength is higher than those of titanium grades 1 and 2. Grade 3 titanium is unalloyed titanium, this means that it has a higher mechanical strength. The typical yield strength of grade 3 titanium is 462 MPa. The density of grade 3 titanium is 4.51 g/cc. The Chemical Composition of grade 3 titanium is that of Oxygen 0.35% max, Nitrogen 0.05% max, Hydrogen 0.015% max, Carbon 0.08% max, Iron 0.30% max and the remainder is Titanium.
Titanium CP2 Grade 3 Sheet Specification
Titanium grade 1 Sheet ASTM Specification | ASTM B265 UNS R50550, ASME SB265 |
---|---|
Grade 3 Titanium Plate Specification | MSRR, AMS, BS, ASTM B265 / ASME SB265 |
Titanium grade 3 Plate Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available |
Titanium grade 3 Plate Width | 10-2500mm |
Titanium grade 3 Sheet AMS | AMS |
Titanium grade 3 Sheet Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Temper | Annealed |
Condition | Polished on both sides |
Titanium grade 3 Plate Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Titanium grade 3 Plate Stock in form of | Titanium grade 3 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
High Quality Titanium grade 3 Sheet |
|
Titanium grade 3 profiling | To provide a full profiling service we use numerous profiling methods including:
|
Specialized in |
|
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Titanium Cp Grade 3 plate Thickness
0.1mm to 100 mm Thk
Grade 3 Titanium Alloy Plate Stock

Titanium grade 3 2B Sheet

Decorative 8K Mirror Titanium grade 3 Sheet

Hairline Titanium grade 3 Sheet

No.4 Titanium grade 3 Sheet

CP Grade 3 Titanium Plate

Cp Titanium Grade 3 Sheet

Titanium CP2 Grade 3 Coil

Titanium Cp Grade 3 Clad Plate

Grade 3 Titanium Alloy Strips

Ti Grade 3 Shim Stock

Cp Ti Grade 3 Rolling Sheets

Titan-Grade 3 Flat Sheet

SB 265 gr 3 Titanium Rolling Plate

Titanium grade 3 Flat Shim

Titanium grade 3 Perforated Plate

SB 265 gr 3 Titanium Polished Plate

Titanium grade 3 cold rolled sheet

Titanium grade 3 hot rolled plate

Grade 3 Titanium Plate

Grade 3 Titanium Sheet

Titanium grade 3 Quarto Plate

Titanium grade 3 Precision Strip

Grade 3 Titanium Cold Rolled Coil, Strip And Sheet

Grade 3 Titanium Hot Rolled Coil, Strip And Plate
Types of Titanium Grade 3 Sheets, Plates & Coils
Titanium Gr 3 Sheets | Titanium Gr 3 Foils |
ASTM B265 Grade 3 Titanium Plates | Gr 3 Titanium Shim Sheet |
Titanium Alloy Gr 3 Shim Sheets | CP Gr 3 Titanium Polished Plates |
Titanium Alloy UNS R50550 Coil | Ti. Alloy Gr 3 Hot Rolled Plates |
Grade 3 Titanium Chequered Plate | Titanium Alloy Gr 3 Cold Rolled Plates |
Titanium DIN 3.7055 Perforated Sheets | Titanium UNS R50550 Coils |
Grade 3 Titanium Cold Rolled Sheets | ASME SB265 Titanium Gr 3 Strips |
Titanium UNS R50550 Hot Rolled Plates Suppliers | ASTM / ASME SB265 Titanium Gr 3 Coils |
Titanium DIN 3.7055 Cold Drawn Plates Exporter | Gr 3 Titanium Cold Rolled Plates |
Difference between Titanium grade 3 Sheet, Plate & Foil
Here are few points to recognised sheet, plate or foil:
If thickness greater than 6.35 mm is called a Titanium grade 3 Plate.
If thickness greater than 0.15 mm and less than 6.35mm is called a Titanium grade 3 Sheet.
If thickness less than 0.15mm is then its a Titanium grade 3 Foil.
Titanium grade 3 Sheet Properties
Titanium Grade 3 Plate, Sheet & Coil Chemical Composition
Grade | C | N | O | H | Ti | Fe |
---|---|---|---|---|---|---|
Titanium Gr 3 | .08 max | .05 max | .35 max | .015 max | Bal | .30 max |
Titan-Grade 3 Plate, Sheet & Coil Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
---|---|---|
Titanium Gr3 | 3.7055 | R50550 |