ASTM B265 Titanium grade 12 Sheet
Ti Grade 12 Plate, CP Grade 12 Titanium Coil, Titanium Alloy Grade 12 Strip supplier
Ti Alloy Grade 12 Foil Sheet, ASTM B265 Gr12 Sheet, Grade 12 Titanium Perforated Sheet exporter in India

Titanium grade 12 Plate

Titanium grade 12 Sheet

Titanium grade 12 Coil
Ti Grade 12 Plate is a titanium grade alloyed with molybdenum and nickel. Grade 12 titanium sheet holds an “excellent” rating for its high quality weldability. Titanium Grade 12 Plate is a highly durable alloy that provides a lot of strength at high temperatures. Ti Grade 12 Sheet is characterized by excellent corrosion resistance in reducing and oxidizing environments and offers better heat resistance than pure titanium grades. Titanium Grade 12 Flat Shim is approved by ASME Boiler Code for use up to 600°F. Titanium Grade 12 Clad Plate is similar to Titanium Grade 2 Plate and Titanium Grade 3 Plate except that Ti Grade 12 hot rolled plates has 0.3% molybdenum and 0.8% nickel. Grade 12 Titanium Sheet has better heat resistance than pure Titanium. Titanium Gr12 Sheet is harder to mark and you will see less scratches. Titanium Grade 12 Hot rolled Plate & Titanium Grade 12 Cold rolled Plate. Titanium Grade 12 Mesh Plate, Ti Grade 12 Coils, Ti Grade 12 cold rolling sheet, Grade 12 Titanium strip, Ti Grade 12 Coil, Ti Grade 12 plates & Ti Grade 12 Cold treated plates can be cold formed by standards methods.
Looking for best price of Titanium Grade 12 Rolling Sheets in India? We have no minimum footage requirements. We will supply the exact amount of Titanium CP Grade 12 Shim Stock you require even if it’s small quantity of Titanium Grade 12 Flat Sheet. Contact Steel Tubes India- the right supplier of Titanium Grade 12 Rolling Plate near you.
Steel Tubes India offers one of the widest ranges of Grade 12 Ti-0.3-Mo-0.8Ni Titanium sheet and Grade 12 Titanium plate in various qualities, sizes and grades which are equivalent to Titanium grade 12 Sheet & Titanium grade 12 Plate (2mm to 12mm). Titanium grade 12 Sheet is available in thicknesses ranging from .016 to .156". Large size Titanium grade 12 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Titanium grade 12 Sheets, thin and ultra-thin gauge Ti. Alloy Grade 12 strip and foil products, rolled down to 2 microns.
Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Titanium Grade 12 (3.7105) Rolling Sheet in uniformly of excellent quality. We apply the process of surface finishing to our Titanium grade 12 Polished Plate by pickling or buff-polishing. Titanium grade 12 Strips levels of finishing & cut can be adjusted according to your requirements. Titanium grade 12 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Titanium grade 12 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Titanium grade 12 plates based on dimensions and shape. Titanium grade 12 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.
Our CP Grade 12 Titanium Armor Plate Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Titanium grade 12 plates in shortest time as well at best price, because we maintain Ti Grade 12 R53400 Cold Rolled Sheet & Titanium Gr 12 Thick Plates in stock for sale, so it saves time & cost to procure any size range in Ti Grade 12 Welding Sheet from any other vendor or Manufacturer of Titanium Gr 12 Plates & Ti Alloy Grade 12 Sheet Plate in India.
Titanium Grade 12 Plate Density
Titanium grade 12 plate density is 0.163 lb/in³ (4.50 g/cc). Titanium grade 12 has a Creep Strength of 48.0 MPa (6960 psi). Titanium grade 12 has an Ultimate Tensile Strength of 450 MPa (65300 psi). The Yield Tensile Strength of Titanium grade 12 is 380 MPa (55100 psi). The Compressive Modulus of Titanium grade 12 is 110 GPa (16000 ksi). Titanium grade 12 has a Poisson Ratio of 0.37. The Fatigue Strength of Titanium grade 12 is 160 MPa (23200 psi).
Titanium grade 12 has an Elongation at Break of 12%. The Tensile Modulus of Titanium grade 12 is 105 GPa (15200 ksi). Your hunt for the best titanium grade 12 sheet suppliers is over. We bring to you world class titanium grade 12 sheets, from a service packed, highly durable product line. We are continually investing our time and efforts in the latest technology and inventory, just to ensure our customers get the very best from us, by way of products and customer service.
Are you seeking Titanium Gr12 Thin Sheet or titanium grade 12 sheets? If yes, then you can be sure we have all that you need. We offer the best quality Titanium Alloy Grade 12 Clad Plate, at the best market prices. Give us a call and talk to us, we are always happy to assist.
Looking to buy Inconel Plate? Inconel Sheet?
Check price of Inconel Plate in India

Titanium grade 12 Plate Price
Titanium grade 12 Sheet Price List
Titanium Grade 12 Sheet Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Titanium Grade 12 Sheet Price in India | Indian | Rs 5500/- | $80 | €68 | Cut to Size |
Titanium Grade 12 Sheet Price in Japan | Japanese | Rs 6200/- | $91 | €78 | Fix Length |
Titanium Grade 12 Sheet Price in UK / Europe | European | Rs 6900/- | $101 | €87 | Fix Length |
Titanium Grade 12 Sheet Price in USA | USA | Rs 7500/- | $110 | €94 | Fix Length |
Please note: Price is subject to change without any prior notice.
Click here to check complete (grade & size wise)
Titanium grade 12 plate Specification
Titanium grade 1 Sheet ASTM Specification | ASTM B265 UNS N56400, ASME SB265 |
---|---|
Grade 12 Titanium Plate Specification | MSRR, AMS, BS, ASTM B265 / ASME SB265 |
Titanium grade 12 Plate Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available |
Titanium grade 12 Plate Thickness | 0.1mm to 100 mm Thk |
Titanium grade 12 Plate Width | 10-2500mm |
Titanium grade 12 Sheet AMS | AMS |
Titanium grade 12 Sheet Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Temper | Annealed |
Condition | Polished on both sides |
Titanium grade 12 Plate Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Titanium grade 12 Plate Stock in form of | Titanium grade 12 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
High Quality Titanium grade 12 Sheet |
|
Titanium grade 12 profiling | To provide a full profiling service we use numerous profiling methods including:
|
Specialized in |
|
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Titanium grade 12 Plate Stock

Titanium grade 12 2B Sheet

Decorative 8K Mirror Titanium grade 12 Sheet

Hairline Titanium grade 12 Sheet

No.4 Titanium grade 12 Sheet

Titanium grade 12 Plate

Titanium grade 12 Sheet

Titanium grade 12 Coil

Titanium grade 12 Clad Plate

Titanium grade 12 Strips

Titanium grade 12 Shim Stock

Titanium grade 12 Rolling Sheets

Titanium grade 12 Flat Sheet

Titanium grade 12 Rolling Plate

Titanium grade 12 Flat Shim

Titanium grade 12 Perforated Plate

Titanium grade 12 Polished Plate

Titanium grade 12 cold rolled sheet

Titanium grade 12 hot rolled plate

Grade 12 Titanium Plate

Grade 12 Titanium Sheet

Titanium grade 12 Quarto Plate

Titanium grade 12 Precision Strip

Grade 12 Titanium Cold Rolled Coil, Strip And Sheet

Grade 12 Titanium Hot Rolled Coil, Strip And Plate
Types of Titanium Grade 12 Sheets, Plates & Coils
Titanium Gr 12 Sheets | Titanium Gr 12 Foils |
ASTM B265 Grade 12 Titanium Plates | Gr 12 Titanium Shim Sheet |
Titanium Alloy Gr 12 Shim Sheets | CP Gr 12 Titanium Polished Plates |
Titanium Alloy UNS N56400 Coil | Ti. Alloy Gr 12 Hot Rolled Plates |
Grade 12 Titanium Chequered Plate | Titanium Alloy Gr 12 Cold Rolled Plates |
Titanium DIN 3.7165 Perforated Sheets | Titanium UNS N56400 Coils |
Grade 12 Titanium Cold Rolled Sheets | ASME SB265 Titanium Gr 12 Strips |
Titanium UNS N56400 Hot Rolled Plates Suppliers | ASTM / ASME SB265 Titanium Gr 12 Coils |
Titanium DIN 3.7165 Cold Drawn Plates Exporter | Gr 12 Titanium Cold Rolled Plates |
Difference between Titanium grade 12 Sheet, Plate & Foil
Here are few points to recognised sheet, plate or foil:
If thickness greater than 6.35 mm is called a Titanium grade 12 Plate.
If thickness greater than 0.15 mm and less than 6.35mm is called a Titanium grade 12 Sheet.
If thickness less than 0.15mm is then its a Titanium grade 12 Foil.
Titanium grade 11 Plate Sizes
Size in Inches | Size in mm |
---|---|
.125" | 3.18mm |
.134" | 3.40mm |
.156" | 3.96mm |
.187" | 4.75mm |
.250" | 6.35mm |
.312" | 7.92mm |
.375" | 9.53mm |
.500" | 12.7mm |
.625" | 15.9mm |
.750" | 19.1mm |
.875" | 22.2mm |
1" | 25.4mm |
1.125" | 28.6mm |
1.250" | 31.8mm |
1.500" | 38.1mm |
1.750" | 44.5mm |
2" | 50.8mm |
2.500" | 63.5mm |
3" | 76.2mm |
Titanium grade 12 Plate Properties
Titanium grade 12 Plate mechanical properties
Titanium Gr 12 Sheets, Plates & Coils Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
---|---|---|
Titanium Gr12 | 3.7165 | N56400 |
Titanium Gr 12 Sheets, Plates & Coils Chemical Composition
Grade | Ti | C | Fe | H | N | O | Al | V |
---|---|---|---|---|---|---|---|---|
Ti Grade12 | 90 min | - | 0.25 max | - | - | 0.2 max | 6 min | 4 min |
Titanium Gr 12 Sheets, Plates & Coils Mechanical & Physical Properties
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|---|
Ti Gr 12 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Common Name | |
---|---|
Titanium Grade 12 | |
Ti-CODE 12™ | |
Ti-0.3Mo-0.8Ni | |
UNS | |
R53400 |
Minimum Tensile Properties | ||||
---|---|---|---|---|
Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
As specified (shape) | 70 (483) | 50 (345) | 18 | 25 |
Typical Tensile Properties | ||||
---|---|---|---|---|
Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
As provided | 88 (607) | 67 (462) | 22 | – |