Grade 3 Titanium Sheet supplier

SB 265 gr 3, CP Grade 3 Titanium Plate and Titanium Cp Grade 3 Strip distributor in India

Buy Titanium CP2 Grade 3 Coil, Grade 3 Titanium Alloy Shim Stock, (3.7055) Cp Ti Gr.3 Foil Sheet, Ti R50550 Perforated Sheet at Best price

CP Grade 3 Titanium Plate
CP Grade 3 Titanium Plate
Grade 3 Titanium Sheet
Grade 3 Titanium Sheet
Cp Ti Grade 3 Foil Sheet
Cp Ti Grade 3 Foil Sheet

Grade 3 Titanium Sheet is a commercially pure form of titanium. CP (Commercially Pure) Titanium Grade 3 Flat Sheet is unalloyed titanium providing higher mechanical strength (typical yield strength 462 MPa) compared with CP Grades 1 Ti Plate and Ti Grade 2 Sheet. CP Grade 3 Titanium Plate has moderate ductility, excellent weldability and superior corrosion resistance. CP Grade 3 Titanium Sheet again promotes versatility of use and with higher mechanical strength, is used in industrial applications where improved mechanical properties are required. Titanium Cp Grade 3 Strip are suitable for a large variety of chemical and marine as well as aerospace and medical applications where strength is a consideration. Titanium Grade 3 Rolling Sheets is an unalloyed, high strength, titanium product providing excellent corrosion resistance and good weldability. unalloyed UNS R50550 Ti Grade 3 Sheet, CP Grade 3 Titanium Sheet can be cold formed by standards methods.

Looking for best price of Titanium Alloy Grade 3 Plate in India? We have no minimum footage requirements. We will supply the exact amount of Titanium CP2 Grade 3 Coil you require even if it’s small quantity of Grade 3 Titanium Alloy Shim Stock. Contact Steel Tubes India- the right supplier of Cp Ti Grade 3 Foil Sheet near you.

Steel Tubes India offers one of the widest ranges of Titan-Grade 3 Flat Sheet (3.7055) and Ti Grade 3 R50550 Perforated Sheet in various qualities, sizes and grades which are equivalent to Titanium grade 3 Sheet & Titanium grade 3 Plate (2mm to 12mm). Titanium grade 3 Sheet is available in thicknesses ranging from .016 to .156". Large size Titanium grade 3 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Titanium grade 3 Sheets, thin and ultra-thin gauge Ti. Alloy Grade 3 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Ti Grade 3 R50550 Perforated Sheet in uniformly of excellent quality. We apply the process of surface finishing to our CP Grade 3 Titanium Rolling Sheet by pickling or buff-polishing. SB 265 gr 3 Strips levels of finishing & cut can be adjusted according to your requirements. Titanium grade 3 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Titanium grade 3 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Cp Titanium Grade 3 Thin Sheet based on dimensions and shape. These sheets are sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Titanium CP2 Grade 3 Welding Sheet Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Grade 3 Titanium Alloy Clad Plate in shortest time as well at best price, because we maintain Titanium Cp Grade 3 Armor Plate in stock for sale, so it saves time & cost to procure any size range in Ti Grade 3 Sheet Plate from any other vendor or Manufacturer of Cp Ti Grade 3 Mesh Plate & mirror finish Titanium grade 3 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

CP Grade 3 Titanium Plate Price

Titanium grade 3 Sheet Price List

Titanium Grade 3 Sheet Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Titanium Grade 3 Sheet Price in India Indian Rs 1300/- $18 €16 Cut to Size
Titanium Grade 3 Sheet Price in Japan Japanese Rs 1600/- $24 €20 Fix Length
Titanium Grade 3 Sheet Price in UK / Europe European Rs 1750/- $26 €22 Fix Length
Titanium Grade 3 Sheet Price in USA USA Rs 1800/- $27 €23 Fix Length

Please note: Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Grade 3 Titanium Sheet Strength

Grade 3 titanium sheet strength is higher than those of titanium grades 1 and 2. Grade 3 titanium is unalloyed titanium, this means that it has a higher mechanical strength. The typical yield strength of grade 3 titanium is 462 MPa. The density of grade 3 titanium is 4.51 g/cc. The Chemical Composition of grade 3 titanium is that of Oxygen 0.35% max, Nitrogen 0.05% max, Hydrogen 0.015% max, Carbon 0.08% max, Iron 0.30% max and the remainder is Titanium.

Titanium CP2 Grade 3 Sheet Specification

Titanium grade 1 Sheet ASTM Specification ASTM B265 UNS R50550ASME SB265
Grade 3 Titanium Plate Specification MSRR, AMS, BS, ASTM B265 / ASME SB265
Titanium grade 3 Plate Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Titanium grade 3 Plate Width 10-2500mm
Titanium grade 3 Sheet AMS AMS
Titanium grade 3 Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Titanium grade 3 Plate Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Titanium grade 3 Plate Stock in form of Titanium grade 3 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Titanium grade 3 Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Titanium grade 3 plate
Titanium grade 3 profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Titanium grade 3 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Titanium grade 3 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Titanium grade 3 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Titanium grade 3 Clad plate: Titanium grade 3 Clad plate is a composite steel plate made by bonding Titanium grade 3 plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Following steel plates are in our stock and we are providing special discount
Inconel Plate, Inconel Sheet, Incoloy Plate, Inconel 625 Plate, Inconel 718 Plate, Hastelloy Plate, Hastelloy Sheet, Monel Plate, Monel Sheet, Titanium Plate, Stainless Steel Sheet, Copper Plate, Copper Nickel Plate, Nickel Plate
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Titanium Cp Grade 3 plate Thickness

0.1mm to 100 mm Thk

Grade 3 Titanium Alloy Plate Stock

Titanium grade 3 2B Sheet
Titanium grade 3 2B Sheet
Decorative 8K Mirror Titanium grade 3 Sheet
Decorative 8K Mirror Titanium grade 3 Sheet
Hairline Titanium grade 3 Sheet
Hairline Titanium grade 3 Sheet
No.4 Titanium grade 3 Sheet
No.4 Titanium grade 3 Sheet
CP Grade 3 Titanium Plate
CP Grade 3 Titanium Plate
Cp Titanium Grade 3 Sheet
Cp Titanium Grade 3 Sheet
Titanium CP2 Grade 3 Coil
Titanium CP2 Grade 3 Coil
Titanium Cp Grade 3 Clad Plate
Titanium Cp Grade 3 Clad Plate
Grade 3 Titanium Alloy Strips
Grade 3 Titanium Alloy Strips
Ti Grade 3 Shim Stock
Ti Grade 3 Shim Stock
Cp Ti Grade 3 Rolling Sheets
Cp Ti Grade 3 Rolling Sheets
Titan-Grade 3 Flat Sheet
Titan-Grade 3 Flat Sheet
SB 265 gr 3 Titanium Rolling Plate
SB 265 gr 3 Titanium Rolling Plate
Titanium grade 3 Flat Shim
Titanium grade 3 Flat Shim
Titanium grade 3 Perforated Plate
Titanium grade 3 Perforated Plate
SB 265 gr 3 Titanium Polished Plate
SB 265 gr 3 Titanium Polished Plate
Titanium grade 3 cold rolled sheet
Titanium grade 3 cold rolled sheet
Titanium grade 3 hot rolled plate
Titanium grade 3 hot rolled plate
Grade 3 Titanium Plate
Grade 3 Titanium Plate
Grade 3 Titanium Sheet
Grade 3 Titanium Sheet
Titanium grade 3 Quarto Plate
Titanium grade 3 Quarto Plate
Titanium grade 3 Precision Strip
Titanium grade 3 Precision Strip
Grade 3 Titanium Cold Rolled Coil, Strip And Sheet
Grade 3 Titanium Cold Rolled Coil, Strip And Sheet
Grade 3 Titanium Hot Rolled Coil, Strip And Plate
Grade 3 Titanium Hot Rolled Coil, Strip And Plate

Types of Titanium Grade 3 Sheets, Plates & Coils

Titanium Gr 3 Sheets Titanium Gr 3 Foils
ASTM B265 Grade 3 Titanium Plates Gr 3 Titanium Shim Sheet
Titanium Alloy Gr 3 Shim Sheets CP Gr 3 Titanium Polished Plates
Titanium Alloy UNS R50550 Coil Ti. Alloy Gr 3 Hot Rolled Plates
Grade 3 Titanium Chequered Plate Titanium Alloy Gr 3 Cold Rolled Plates
Titanium DIN 3.7055 Perforated Sheets Titanium UNS R50550 Coils
Grade 3 Titanium Cold Rolled Sheets ASME SB265 Titanium Gr 3 Strips
Titanium UNS R50550 Hot Rolled Plates Suppliers ASTM / ASME SB265 Titanium Gr 3 Coils
Titanium DIN 3.7055 Cold Drawn Plates Exporter Gr 3 Titanium Cold Rolled Plates

Difference between Titanium grade 3 Sheet, Plate & Foil

Titanium grade 3 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Titanium grade 3 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Titanium grade 3 Sheet.

If thickness less than 0.15mm is then its a Titanium grade 3 Foil.

Titanium grade 3 Sheet Properties

Titanium Grade 3 Plate, Sheet & Coil Chemical Composition

Grade C N O H Ti Fe
Titanium Gr 3 .08 max .05 max .35 max .015 max Bal .30 max

Titan-Grade 3 Plate, Sheet & Coil Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Titanium Gr3 3.7055 R50550

 

Cp Ti Grade 3 Foil Sheet, Titan-Grade 3 Flat Sheet (3.7055), Ti Grade 3 R50550 Perforated Sheet supplier

CP Grade 3 Titanium plate stockist | Titanium CP2 Grade 3 plate suppliers | Titanium Cp Grade 3 Sheet manufacturer in India | Grade 3 Titanium Alloy Shim Stock