Titanium grade 11 plate

Titanium Palladium Grade 11 Mesh Plate, CP Grade 11 Sheet supplier

Ti Grade 11 Coil, Titanium Alloy Grade 11 Strip, Ti Alloy Grade 11 Flat Sheet, CP Grade 11 Perforated Sheet exporter in India

Titanium grade 11 Plate
Titanium grade 11 Plate
Titanium grade 11 Sheet
Titanium grade 11 Sheet
Titanium grade 11 Coil
Titanium grade 11 Coil

Are you looking for nothing but the very best titanium grade 11 sheet suppliers? If so, you can be 100% sure that you have arrived at the right website! We are a PED approved manufacturer of titanium grade 11 sheets in India. Titanium grade 11 has a Charpy, V-Notch Impact of 109 J (80 ft.lbs). Titanium grade 11 has a Hardness (Bhn) of 120.

Titanium Grade 11 Plate (Ti-0.15Pd – Grade 11) is considered a superior combination of high strength and low weight ratios when compared to steel. Titanium Gr11 Plate can be only brushed not polished. As with Titanium grade 1 plate, Ti Grade 11 Sheet has optimum ductility and cold formability. Titanium Grade 11 Rolling Sheets are used in aircraft and aerospace application. Titanium Grade 11 Flat Sheet has been used exclusively as an aerospace material, and it is slowly penetrating many markets, including power plants, watch industry etc. Titanium Grade 11 Clad Plate is harder to mark and you will see less scratches. It has useful strength, high impact toughness and excellent weldability.

Steel Tubes India in renowned Manufacturer of Titanium Palladium Grade 11 Foil Sheet in India. We manufacture of all types on Titanium Grade 11 Shim & Titanium Grade 11 Hot rolled Plate. We have supplied Titanium Grade 11 Cold rolled Plate to Gasco, Ti Grade 11 Hot rolling Plate to Saudi Aramco, Ti Grade 11 cold rolling Plate to Oman, Ti Grade 11 Cold treated sheet to KNPC, Ti Grade 11 hot rolled sheet to Qatar Gas, Ti Grade 11 Coils to Dubai, Ti Grade 11 strip to leading oil & gas company in Iraq. If you are looking for Titanium Grade 11 Plates feel free to contact at stindia@stindia.com for any assistance.

Steel Tubes India offers one of the widest ranges of Grade 11 Titanium sheet and Grade 11 Titanium plate in various qualities, sizes and grades which are equivalent to Titanium grade 11 Sheet & Grade 11 Titanium Cold Rolled Sheet (2mm to 12mm). Titanium grade 11 Sheet is available in thicknesses ranging from .016 to .156". Large size Titanium grade 11 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Titanium grade 11 Sheets, thin and ultra-thin gauge Ti. Alloy Grade 11 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Titanium Gr11 Rolling Sheet in uniformly of excellent quality. We apply the process of surface finishing to our Titanium grade 11 Polished Plate by pickling or buff-polishing. Titanium grade 11 Strips levels of finishing & cut can be adjusted according to your requirements. Titanium grade 11 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Titanium grade 11 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Titanium grade 11 plates based on dimensions and shape. Titanium grade 11 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Ti Grade 11 Thin Sheet Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Titanium grade 11 plates in shortest time as well at best price, because we maintain Titanium Alloy Grade 11 Welding Sheet & Titanium Palladium Grade 11 Armor Plate in stock for sale, so it saves time & cost to procure any size range in Bright annealed Titanium grade 11 sheet from any other vendor or Manufacturer of Titanium Gr 11 Plates & Ti Alloy Grade 11 Strips in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

Titanium grade 11 Plate Price

Titanium grade 11 Sheet Price List

Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Titanium Grade 11 Shim Price in India Indian Rs 5000/- $73 €62 Cut to Size
Titanium Grade 11 Sheet Price in Japan Japanese Rs 6000/- $87 €74 Fix Length
Titanium Grade 11 Sheet Plate Price in UK / Europe European Rs 6900/- $101 €87 Fix Length
Titanium Grade 11 Sheet Price in USA USA Rs 7500/- $110 €94 Fix Length

Please note: Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Titanium grade 11 plate Specification

Titanium grade 1 Sheet ASTM Specification ASTM B265 UNS R56320ASME SB265
Grade 11 Titanium Plate Specification MSRR, AMS, BS, ASTM B265 / ASME SB265
Titanium grade 11 Plate Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Titanium grade 11 Plate Thickness 0.1mm to 100 mm Thk
Titanium grade 11 Plate Width 10-2500mm
Titanium grade 11 Sheet AMS AMS
Titanium grade 11 Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Titanium grade 11 Plate Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Titanium grade 11 Plate Stock in form of Titanium grade 11 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Titanium grade 11 Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Titanium grade 11 plate
Titanium grade 11 profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Titanium grade 11 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Titanium grade 11 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Titanium grade 11 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Titanium grade 11 Clad plate: Titanium grade 11 Clad plate is a composite steel plate made by bonding Titanium grade 11 plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Titanium Grade 11 Seamless Pipe Sizes

Titanium grade 11 seamless pipe sizes vary and they could be anywhere from 7" (193.7 mm OD to 20" 508 mm OD), 15 mm NB to 150 mm NB (1/2" to 6"), etc. The outer diameter of these titanium grade 11 seamless pipes can be from 1.250" – 6.000" (30-150 mm). Titanium grade 11 seamless pipes can have a wall thickness of 0.095" – 1.000" (.2.5-25 mm). The length of these titanium grade 11 seamless pipes can be Single Random, Double Random or any length as is required by you. Yes, we can tailor make these titanium grade 11 seamless pipes, to any length that you need.

Titanium grade 11 Plate Stock

Titanium grade 11 2B Sheet
Titanium grade 11 2B Sheet
Decorative 8K Mirror Titanium grade 11 Sheet
Decorative 8K Mirror Titanium grade 11 Sheet
Hairline Titanium grade 11 Sheet
Hairline Titanium grade 11 Sheet
No.4 Titanium grade 11 Sheet
No.4 Titanium grade 11 Sheet
Titanium grade 11 Plate
Titanium grade 11 Plate
Titanium grade 11 Sheet
Titanium grade 11 Sheet
Titanium grade 11 Coil
Titanium grade 11 Coil
Titanium grade 11 Clad Plate
Titanium grade 11 Clad Plate
Titanium grade 11 Strips
Titanium grade 11 Strips
Titanium grade 11 Shim Stock
Titanium grade 11 Shim Stock
Titanium grade 11 Rolling Sheets
Titanium grade 11 Rolling Sheets
Titanium grade 11 Flat Sheet
Titanium grade 11 Flat Sheet
Titanium grade 11 Rolling Plate
Titanium grade 11 Rolling Plate
Titanium grade 11 Flat Shim
Titanium grade 11 Flat Shim
Titanium grade 11 Perforated Plate
Titanium grade 11 Perforated Plate
Titanium grade 11 Polished Plate
Titanium grade 11 Polished Plate
Titanium grade 11 cold rolled sheet
Titanium grade 11 cold rolled sheet
Titanium grade 11 hot rolled plate
Titanium grade 11 hot rolled plate
Grade 11 Titanium Plate
Grade 11 Titanium Plate
Grade 11 Titanium Sheet
Grade 11 Titanium Sheet
Titanium grade 11 Quarto Plate
Titanium grade 11 Quarto Plate
Titanium grade 11 Precision Strip
Titanium grade 11 Precision Strip
Grade 11 Titanium Cold Rolled Coil, Strip And Sheet
Grade 11 Titanium Cold Rolled Coil, Strip And Sheet
Grade 11 Titanium Hot Rolled Coil, Strip And Plate
Grade 11 Titanium Hot Rolled Coil, Strip And Plate

Types of Titanium Grade 11 Sheets, Plates & Coils

Titanium Gr 11 Sheets Titanium Gr 11 Foils
ASTM B265 Grade 11 Titanium Plates Gr 11 Titanium Shim Sheet
Titanium Alloy Gr 11 Shim Sheets CP Gr 11 Titanium Polished Plates
Titanium Alloy UNS R56320 Coil Ti. Alloy Gr 11 Hot Rolled Plates
Grade 11 Titanium Chequered Plate Titanium Alloy Gr 11 Cold Rolled Plates
Titanium DIN 3.7195 Perforated Sheets Titanium UNS R56320 Coils
Grade 11 Titanium Cold Rolled Sheets ASME SB265 Titanium Gr 11 Strips
Titanium UNS R56320 Hot Rolled Plates Suppliers ASTM / ASME SB265 Titanium Gr 11 Coils
Titanium DIN 3.7195 Cold Drawn Plates Exporter Gr 11 Titanium Cold Rolled Plates

Difference between Titanium grade 11 Sheet, Plate & Foil

Titanium grade 11 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Titanium grade 11 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Titanium grade 11 Sheet.

If thickness less than 0.15mm is then its a Titanium grade 11 Foil.

Titanium grade 11 Plate Sizes

Size in Inches Size in mm
.125" 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" 4.75mm
.250" 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" 12.7mm
.625" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm

Titanium grade 11 Plate Properties

Titanium grade 11 Plate mechanical properties

Titanium Grade11 Sheets, Plates & Coils Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Titanium Gr11 3.7195 R56320

Titanium Grade 11 Sheets, Plates & Coils Chemical Composition

Grade C N O H Ti Fe Al Pd
Titanium Gr 11 .08 max .03 max .25 max .015 max Bal 0.30 max - .12 - .25

Typical Mechanical Properties of Titanium Gr 11 Sheets, Plates & Coils

  • Annealed
  • Heat Treatment: 1290°F
  • Tensile Strength: 35 ksi (240 MPa) min - 50 ksi (345 MPa) typ
  • Suggested Operating Conditions: -300°F to 1000°F (-184°C to 540°C)

Titanium Grade 11 Sheets, Plates & Coils Physical Properties

Density: 0.163 lb/in3, (4.51 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 16.3 x 103 ksi (112 GPa)

Modulus of Rigidity (G)
At 70°F (20°C): 5.9 x 103 ksi (41 GPa)

Coefficient of Expansion:
5.4 µin/in.-°F (70°F to 932°F)
9.7 µm/m-°C (20°C to 500°C)

Electrical Resistivity: 21 µΩ.in, (53.3 µΩ.cm)

Thermal Conductivity: 12.6 Btu-in/ft2hr-°F, (21.79 W/m-K)

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As specified (shape) 35 (240) 20 (138) 24 30

Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As provided 50 (345) 32 (221) 37


Titanium Palladium Grade 11 Sheet & CP Grade 11 Perforated Sheet suppliers

Ti Grade 11 Coil stockist | Titanium Gr11 Plate suppliers | Titanium grade 11 plate manufacturer in India | CP Grade 11 Sheet Stock