Stainless Steel 310H Sheet, Stainless Steel 310H Plate

Stainless Steel 310H Sheet supplier, Stainless Steel 310H Polished Plate, Stainless Steel 310H Coil Suppliers in India, Stainless Steel 310H plate price in India, 310H Stainless Steel strip distributor, Stainless Steel 310H cold rolled plate stockist in Mumbai, 310H Stainless Steel Sheet Stockist

Stainless Steel 310H Plate
Stainless Steel 310H Plate
Stainless Steel 310H Sheet
Stainless Steel 310H Sheet
Stainless Steel 310H Coil
Stainless Steel 310H Coil

Stainless Steel 310H Sheet has carbon content and is a preferred choice for high temperature applications. Stainless Steel 310H Plate is an austenitic stainless steel often used in sulfur bearing gas atmospheres, heat exchanger and recuperator tubing and molten salt applications. Stainless Steel 310H Perforated Sheet (UNS S31009) has a carbon content restricted to exclude the lower end of the 310 range. Stainless Steel 310H Corrugated Sheet has good resistance to oxidation in intermittent service in air at temperatures up to 1040°C and 1150°C in continuous service. it is recommended that Stainless Steel 310H Expanded Sheet, 310H Stainless Steel Laminate Sheet, No 8 Mirror Finish 310H Stainless Steel Sheet, 310H Etching stainless steel sheet, 310H Embossing stainless steel sheet, Stainless Steel 310H Hairline Sheet, Stainless Steel 310H Diamond Sheet, Bright Annealed 310H Stainless Steel Sheet should not be continuously used at 425-860°C (797-1580°F) range due to carbide precipitation.

  • We supply Stainless Steel 310H Shim Sheet in #4, #6, and #8 mirror finish
  • We can custom level 3/8" thick x 72" x 186" from our plate line to reduce scrap

Looking for best price of Stainless Steel 310H Chequered Plate & Stainless Steel 310H Design Sheet in India? We have no minimum footage requirements. We will supply the exact amount of 310H Brushed Stainless Steel Sheet you require even if it’s small quantity of Stainless Steel 310H Mesh Sheet. Contact Steel Tubes India- the right supplier of Stainless Steel 310H Strip near you.

Steel Tubes India offers one of the widest ranges of SS 310H sheet and SS 310H plate in various qualities, sizes and grades which are equivalent to Stainless Steel 310H Sheet & Stainless Steel 310H Plate (2mm to 12mm). Stainless Steel 310H Sheet is available in thicknesses ranging from .016 to .156". Large size Stainless Steel 310H Sheet will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply No 8 Mirror Finish Stainless Steel 310H Sheet, extra large-size Stainless Steel 310H Sheets, thin and ultra-thin gauge 310H Stainless Steel strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Stainless Steel 310H Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Stainless Steel 310H Polished Plate by pickling or buff-polishing. Stainless Steel 310H Strips levels of finishing & cut can be adjusted according to your requirements. Stainless Steel 310H Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Stainless Steel 310H Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Stainless Steel 310H plates & Bright Annealed 310H Stainless Steel Sheet based on dimensions and shape. Stainless Steel 310H Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Mirror stainless steel 310H sheet & 310H Stainless Steel Diamond Sheet has as near a perfect polish that can be produced on stainless steel. 310H Perforated stainless steel sheets can be used for technical purposes such as strainers, filters and sieves in food processing, brewing and acoustic diffusers as well as interior design and architectural features. The finish referred to as “Brushed Finish” has a trade reference “DP” which means “Dull Polish”. This finish is achieved using grit in the polishing media. Variations in the brush effect are obtained by using grits of different sizes. Stainless steel sheet grades 310H, finishes include Natural, Bright, Brushed, Dull Polished, Mirror and Embossed Rigidised.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of 310H Stainless Steel Decorative Sheet, 310H Stainless Steel Embossed Sheet, 310H Stainless Steel Etching Sheet, 310H Stainless Steel Foil Sheet, 310H Stainless Steel Hairline Sheet, 310H Stainless Steel Laminate Sheet and Stainless Steel 310H plates in shortest time as well at best price, because we maintain Stainless Steel 310H Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Stainless Steel 310H sheet from any other vendor or Manufacturer of mirror finish Stainless Steel 310H Sheet in India. Click here to check recent Jindal stainless steel sheet price list.

Distributor of Stainless Steel 310H Clad Plate, Stainless Steel 310H Sheet, SS 310H Coil, Stainless Steel 310H Strips, AMS SS Grade 310H UNS S31009 Shim exporter in India, stockist of Stainless Steel 310H Rolling Sheets, SS 310H slitting coil, 310H Stainless Steel Flat Sheet, Stainless Steel 310H Polished Plate in Mumbai, India

Looking to buy 304 Stainless Steel sheet? 304 Stainless Steel plate?

Check Today's price of 304 Stainless Steel sheet in India

304 Stainless Steel sheet suppliers

 

Stainless Steel 310H Sheet Price

Stainless Steel 310H Sheet Price List

Thickness Price in Euro £
2000mm x 1000mm 310/H Stainless Steel Sheet
0.9mm 101.46
1.2mm 144.96
1.5mm 175.11
2.0mm 228.71
3.0mm 267.79

Finish: Dull Polished/ Mill
Please note: 
Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Stainless Steel 310H Shim Stock, 310H rolling sheets supplier, 310H Stainless Steel flat sheet, Stainless Steel 310H Sheet in stock, SS 310H rolling plate suppliers and Stainless Steel 310H bright plate for sale, polished 310H stainless steel sheet, Nickel 310H Plate, Stainless Steel 310H shim stock. Stainless Steel 310H sheet price in India, Stainless Steel 310H flat shim stock in India, 310H stainless steel sheet cut to size

Stainless Steel 310H Sheet Specification

Stainless Steel 310H Sheet ASTM Specification ASTM A240 / ASME SA240
SS 310H Sheet Specification MSRR, AMS, BS, ASTM A240 / ASME SA240
Stainless Steel 310H Sheet Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Stainless Steel 310H Sheet Thickness 0.1mm to 100 mm Thk
Stainless Steel 310H Sheet Width 10-2500mm
Stainless Steel 310H Sheet AMS AMS
Stainless Steel 310H Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Stainless Steel 310H Sheet Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stainless Steel 310H Sheet Stock in form of SS 310H Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Stainless Steel 310H Sheet ASTM Standard ASTM A162, GB/T2054, DIN177502002, ASTM B127, ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Stainless Steel 310H Sheet Dimensions 
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
High Quality Stainless Steel 310H Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Stainless Steel 310H Sheet
Stainless Steel 310H profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Stainless Steel 310H Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Stainless Steel 310H Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Stainless Steel 310H Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Stainless Steel 310H Clad plate: Stainless Steel 310H Clad plate is a composite steel plate made by bonding Stainless Steel 310H plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Following steel plates are in our stock and we are providing special discount
Inconel Plate, Inconel Sheet, Incoloy Plate, Inconel 625 Plate, Inconel 718 Plate, Hastelloy Plate, Hastelloy Sheet, Monel Plate, Monel Sheet, Titanium Plate, 904l Plate, Stainless Steel Sheet, Copper Plate, Copper Nickel Plate, Nickel Plate
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Stainless Steel 310H Sheet

Stainless Steel 310H 2B Sheet
Stainless Steel 310H 2B Sheet
Decorative 8K Mirror Stainless Steel 310H Sheet
Decorative 8K Mirror Stainless Steel 310H Sheet
Hairline Stainless Steel 310H Sheet
Hairline Stainless Steel 310H Sheet
No.4 Stainless Steel 310H Sheet
No.4 Stainless Steel 310H Sheet
Stainless Steel 310H Plate
Stainless Steel 310H Plate
Stainless Steel 310H Sheet
Stainless Steel 310H Sheet
Stainless Steel 310H Coil
Stainless Steel 310H Coil
Stainless Steel 310H Clad Plate
Stainless Steel 310H Clad Plate
Stainless Steel 310H Strips
Stainless Steel 310H Strips
Stainless Steel 310H Shim Stock
Stainless Steel 310H Shim Stock
Stainless Steel 310H Rolling Sheets
Stainless Steel 310H Rolling Sheets
Stainless Steel 310H Flat Sheet
Stainless Steel 310H Flat Sheet
Stainless Steel 310H Rolling Plate
Stainless Steel 310H Rolling Plate
Stainless Steel 310H Flat Shim
Stainless Steel 310H Flat Shim
Stainless Steel 310H Perforated Plate
Stainless Steel 310H Perforated Plate
Stainless Steel 310H Polished Plate
Stainless Steel 310H Polished Plate
Stainless Steel 310H cold rolled sheet
Stainless Steel 310H cold rolled sheet
Stainless Steel 310H hot rolled plate
Stainless Steel 310H hot rolled plate
SS 310H Plate
SS 310H Plate
SS 310H Sheet
SS 310H Sheet
Stainless Steel 310H Quarto Plate
Stainless Steel 310H Quarto Plate
Stainless Steel 310H Precision Strip
Stainless Steel 310H Precision Strip
SS 310H Cold Rolled Coil, Strip And Sheet
SS 310H Cold Rolled Coil, Strip And Sheet
SS 310H Hot Rolled Coil, Strip And Plate
SS 310H Hot Rolled Coil, Strip And Plate

Types of Stainless Steel 310H Sheet, Plate & Foil

Stainless Steel 310H Shim Sheet Stainless Steel 310H Perforated Sheet
Stainless Steel 310H Chequered Plate Stainless Steel 310H Strip
Stainless Steel 310H Flats 310H Brushed Stainless Steel Sheet
310H Polished stainless steel sheet 310H stainless steel foil
310H Super Mirror Stainless Steel Sheet 310H Embossed stainless steel sheet
Stainless Steel 310H 8K etching SS 310H gold mirror etching
SS 310H decorative sheets Pattern Stainless Steel 310H Elevator Door sheet
310H Mirror Etching Elevator Door Sheet 310H Etching stainless steel sheet
310H Color stainless steel sheet 310H Embossing stainless steel sheet
310H Stamped stainless steel sheet 310H Polish stainless steel sheet
310H Laminate Stainless Steel Sheet Stainless Steel 310H Coils
Brushed Finish 310H grade Stainless Steel Sheet Smooth Finish 310H grade Stainless Steel Sheet
Circle Polished 310H grade Stainless Steel Sheet Stainless Steel 310H Mesh Sheet
Bright Annealed 310H Stainless Steel Sheet Stainless Steel 310H Corrugated Sheet
Stainless Steel 310H Diamond Sheet Stainless Steel 310H Decorative Sheet
Stainless Steel 310H Design Sheet Stainless Steel 310H Expanded Sheet
Stainless Steel 310H Embossed Sheet Stainless Steel 310H Etching Sheet
Stainless Steel 310H Foil Sheet Stainless Steel 310H Hairline Sheet
Stainless Steel 310H Laminate Sheet No 8 Mirror Finish Stainless Steel 310H Sheet

Difference between Stainless Steel 310H Sheet, Plate & Foil

Stainless Steel 310H Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Stainless Steel 310H Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Stainless Steel 310H Sheet.

If thickness less than 0.15mm is then its a Stainless Steel 310H Foil.

Embossed Stainless Steel 310H Sheet
Embossed Stainless Steel 310H Sheet
310H Perforated Stainless Steel Sheet
310H Perforated Stainless Steel Sheet
310H Super Mirror Stainless Steel Sheet
310H Super Mirror Stainless Steel Sheet

310H EMBOSSED STAINLESS SHEET

Steel Tubes India are suppliers and fabricators of embossed, (rigidised), 310H stainless steel sheet metal including 6wl rigidized stainless steel, 6wl stainless steel sheet, 5wl textured stainless steel, 5wl patterned stainless steel, 310H embossed stainless steel sheets.

310H PERFORATED STAINLESS STEEL SHEET

We now offer circle cutting in ss 310H perforated sheets up to 1000mm diameter.

Grade Hole Dia Hole Centres O/A Finish Tck mm Full Sheet Size mm
Stainless Steel 310H 0.75mm 1.5mm 23% 2B 0.6 2000 x 1000
Stainless Steel 310H 1mm 2mm 23% 2B 1.0 2000 x 1000
Stainless Steel 310H 1.5mm 2.6mm 30% 2B 1.0 2000 x 1000
Stainless Steel 310H 2mm 3.5mm 30% 2B 1.0 2000 x 1000
Stainless Steel 310H 2mm 3.5mm 30% 2B 1.0 2000 x 1000
Stainless Steel 310H 3mm 5mm 33% 2B 1.0 2000 x 1000
Stainless Steel 310H 4mm 5.6mm 46% 2B 1.0 2000 x 1000
Stainless Steel 310H 5mm 8mm 35% 2B 1.0 2000 x 1000
Stainless Steel 310H 6mm 8mm 51% 2B 1.0 2000 x 1000
Stainless Steel 310H 8mm 10mm 58% 2B 1,0 2000 x 1000

PLAIN AND POLISHED 310H STAINLESS STEEL SHEETS

Steel Tubes India are suppliers of a range of polished stainless steel 310H sheets, finishes include Natural, Bright, Brushed, Dull Polished, Mirror and Embossed Rigidised

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 310H Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250

310H SUPER MIRROR STAINLESS STEEL SHEETS

Steel Tubes India are suppliers and fabricators of 310H Mirror Stainless Steel Sheet Metal. Our Mirror stainless steel 310H sheet has as near a perfect polish that can be produced on stainless steel. Super Mirror is blemish free, it has no grain and has reflective qualities just like a glass mirror. It can be fabricated with conventional sheet metal machinery. Folded, rolled, engraved.

Stainless Steel 310H Sheet Properties

Stainless Steel 310H Sheet mechanical properties

SS 310H Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310H 0.04 – 0.10 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 19.00 – 21.00 53.885 min

Stainless Steel 310H Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%

Equivalent Grades for 310H Stainless Steel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310H S31009

Stainless Steel 310H Sheet related searching

Stainless Steel 310H plates, coils, 310H Stainless Steel plates, Stainless Steel 310H plates price India, ASME SA240 SS 310H sheets Suppliers, Stainless Steel 310H sheet, SS 310H sheets specification, Stainless Steel 310H sheets exporter in India, SS Grade 310H UNS S31009 coils, SS Grade 310H DIN sheets, Stainless Steel 310H cold rolled sheet distributors, 310H SS coil stockholder, Stainless Steel 310H alloy shim sheets, Stainless Steel 310H sheets price, Stainless Steel 310H plates Exporter in India, Stainless Steel 310H chequered plate, 310H Stainless Steel hot rolled plates dealers in Mumbai, 310H stainless steel sheet weight chart, 310H stainless steel sheet price per kg in india, stainless steel 310H sheet hs code, stainless steel 310H sheet size chart, 310H stainless steel sheet thickness, stainless steel 310H sheet rate per kg in india, 4'x8' stainless steel 310H sheet, 24 x 36 stainless steel 310H sheet.

Client Reference and Applications

Our Stainless Steel 310H Sheet are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality Stainless Steel 310H Sheet to our clients globally.

Aircraft Materials & Aerospace Materials Specialist

Stainless Steel 310H Sheet stockist | Stainless Steel 310H Sheet suppliers | Stainless Steel 310H Sheet manufacturer in India | Stainless Steel 310H Sheet Stock