SA312 TP 316TI Stainless Steel Pipe supplier

Manufacturer of 316ti Seamless Tube, 316Ti Rectangular tubing in India

Buy ASTM A269 TP 316TI SS Seamless Pipe, A312 TP 316TI Round Pipe, 316TI SS ERW Pipe, SS UNS S31635 Polished Pipe at best price.

SA312 TP316TI Stainless Steel Pipe
SA312 TP316TI Stainless Steel Pipe
316ti Seamless Tube
316ti Seamless Tube
AISI 316ti Tubes
AISI 316ti Tubes

316ti Stainless Steel Pipe Suppliers

If you happen to be seeking the very best 316Ti stainless steel pipe suppliers, then rest assured that you have found what you have been looking for. When exposed to high temperatures, AISI 316Ti Pipes has the capacity to retain its corrosion resistance and also its good strength. The Density of 316Ti Piping material is 0.290 lb/in³ (8 g/cc). The Ultimate Tensile Strength of 316Ti steel pipe is 90 - 115 ksi (620 - 795 MPa). 316Ti has a Yield Tensile Strength of 206 MPa (30000 psi). The Modulus of Elasticity is 164 GPa (24000 ksi).

AISI 316ti Tubes are similar to 316L but has better high temperature strength and mechanical strength. SA312 TP 316TI Stainless Steel Pipe has equvilent corrosion resistance to sensitisation as the low carbon version 316L. This SS 316Ti Tube is essentially a standard carbon 316 type with titanium stabilisation and is similar in principle to the titanium stabilisation of the 304 (1.4301) type to produce 321 (1.4541). SA 312 TP316Ti is also known as AISI 316Ti, Supra316Ti, Nirosta 4571, Polarit 761, and Remanit 4571. 316ti Seamless Tube contains a small amount of titanium. Titanium content is typically only around 0.5%. The main advantage of TP316Ti Tubing is that it can be held at higher temperatures for a longer period without sensitisation (precipitation) occurring. in AISI 316Ti Pipe corrosion resistance is also improved, particularly against sulfuric, hydrochloric, acetic, formic and tartaric acids, acid sulfates and alkaline chlorides.

We offer various sizes of stainless steel welded round tubes in 316Ti grade up to the biggest 4 inches in diameter in 20 feet long. SS 316Ti welded round tubes are available in bright polished finish. We supply SA312 TP316TI tubes up to the biggest 4 inches in wall opening in 20 feet long. SS 316Ti welded square tubes are available in both bright polished and hairline finish. We also stock TP316Ti Tube up to the biggest 4 inches in wall opening in 20 feet long. TP316Ti Stainless Steel Pipe are available in both bright polished and hairline finish.

Steel Tubes India in renowned Manufacturer of TP316Ti SS Seamless Tubing in India. We manufacture of all types on ASTM A312 TP316Ti tubes. We have supplied ASTM A269 TP316Ti Polish Tube to Gasco, AISI 316Ti Tube Seamless Pressure Tubing to Saudi Aramco, Stainless Steel 316Ti Oval Tube to Oman, 316Ti Stainless Steel Tube to KNPC, 316Ti Tubing to Qatar Gas, Stainless Steel 316Ti Rectangular tubing to Dubai, ASTM A213 SS TP 316Ti Stainless Steel Pipe & Tube to leading oil & gas company in Iraq, SS UNS S31635 Square Pipes to South Africa, GOST 08Ch17N13M2T Tube to North America, WERKSTOFF NR.1.4571, SS UNS S31635 Tubing to United Kingdom and SS 316Ti EFW Tubes to UAE. We have more than 14 years of experience in supplying ASTM A249 TP 316Ti Stainless Steel High Pressure Tube. Our highly experienced team can help you to buy high quality Stainless Steel 316Ti Coiled Tube at best price.

If you are looking to buy High quality assured Stainless Steel 316Ti capillary tube, Stainless Steel 316Ti Square Tubing or Stainless Steel 316Ti Polished Tube at best price in India, send an email to stindia@stindia.com, we will send you the Free Quote & recent price of Stainless Steel 316Ti precision tubes, Stainless Steel 316Ti Welded Tube, Stainless Steel 316Ti instrumentation tubes, Stainless Steel 316Ti Oval Tube along with inspection & delivery schedule. Steel Tubes India is a Govt. of India recognised Exporter of Stainless Steel 316Ti Mirror Tube in India and shipping to Singapore, Malaysia, Kuwait, Canada, Australia, United States, Qatar, Ethiopia, Thailand, Indonesia, Europe, United Kingdom, Trinidad & Tobago, United Arab Emirates, Oman, Philippines, New Zealand, St. Helena, South Africa, Nigeria, Ghana, Hong Kong, Saudi Arabia, Ireland, Pakistan, South Korea, Iraq, Norway, Finland, Egypt, Netherlands, Kenya, Sweden, Belgium, Denmark, Iran, Taiwan, Greece & Germany since 2002. SS 316Ti Needle Tube, SS 316Ti Round Tube and Stainless Steel 316Ti hydraulic tube are available in different sizes, diameter & wall thickness.

En 1.4571 / AISI 316ti

EN 1.4571 / AISI 316Ti is Grade 316Ti stainless steel, which has the Werkstoff number of 1.4571. AISI 316Ti is titanium stabilized, hence it shows increased strength at superior temperatures. 316Ti also improves resistance against tartaric acids, acid sulfates, hydrochloric, acetic, sulfuric, formic acids and alkaline chlorides. AISI TP316Ti can be used for various applications such as heat exchangers, pulp and paper equipment, propeller fittings and shafts, screening application in marine settings, outer architectural components on shorelines, automotive industries, oil and gas industries, etc.

Looking to buy 304 Stainless Steel Tube? 304 Stainless Steel Tubing?

Check Today's price of 304 Stainless Steel Tube in India

304 Stainless Steel Tube suppliers

Stainless Steel 316Ti Tube Price

Price of SS 316Ti Seamless Tube ASTM A312 TP 316Ti : $ 5800 ~ $ 7300 USD/Ton
Price of SS 316Ti ERW/Welded Tube ASTM A312 TP 316Ti : $ 5500 ~ $ 7000 USD/Ton
Price of SS 316Ti EFW Tube ASTM A358 TP 316Ti : $ 5300 ~ $ 6800 USD/Ton

ASTM A312 TP316Ti Tube Specification

ASTM A312 TP316TI Tube Specifications

ASTM A312 TP316Ti tube specifications are that they have a Chemical Composition of Chromium 16.00-18.00, Carbon 0.08 max, Sulfur 0.030 max, Silicon 1.00 max, Manganese 2.00 max, Titanium 5 x (Carbon + Nitrogen)-0.07, Molybdenum 2.00-3.00, Nickel 10.00-14.00, Phosphorus 0.040 max, Copper 0.075 max and Iron balance. The Density of TP316Ti is 0.29 lbs/in³ (7.99 g/cm³). The Modulus of Elasticity KSI (MPa) of TP316Ti in torsion is 11.2 x 10³ (77 x 10³). TP316Ti Modulus of Elasticity KSI (MPa) in tension is 28.0 x 10³(193 x 10³). The Magnetic Permeability (H = 200 Oersteds) Annealed is < 1.02 max of TP316Ti.

Stainless Steel 316Ti Tube Standards ASTM A213, ASTM A249, ASTM A269, ASME SA213, ASME SA249, ASME SA269, EN 10216-5 TC1 / TC2, PED 97/23/EC, AD 2000, NACE MR0175/ISO 15156
Stainless Steel 316Ti Seamless Tube Size 3.35 mm OD To 101.6 mm OD
Stainless Steel 316Ti Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Stainless Steel 316Ti tubing wall thickness 0.020" –0.220", (special wall thicknesses available)
SS 316Ti tube Length Single Random, Double Random, Standard & Cut length
316Ti Stainless Steel Tube Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Stainless Steel 316Ti tube Form Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc.
Stainless Steel 316Ti Tube Type Seamless, ERW, EFW, Welded, Fabricated
Electropolished (EP) Electropolished for Ultra High Purity Systems
Non-Electropolished (BA) Bright Annealed or (AP) Annealed & Pickled for High-Purity, (CFOS) Cleaned for Oxygen Grade Service or Corrosive Systems
I.D. Surface Finish Options 5, 7 & 10 µin. Ra
JIS 8A to 250A
Tolerances In accordance with: ASTM: A269 & A632, JIS: G 3459
316Ti stainless steel tubing End Plain End, Beveled End, Treaded, Ends are suitable for orbital welding
Marking All 316Ti Stainless Steel tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
316Ti stainless steel tubing Application Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
Specialize in Stainless Steel 316Ti Capillary Tube & Other Odd Size 
Stainless Steel 316Ti Heat Exchanger & Condenser Tubes
Stainless Steel 316Ti Hydraulic tubing with OD up to 50.8 mm (2.0 in.) are delivered in bright annealed condition
Stainless Steel 316Ti hydraulic tube with OD larger than 50.8 mm are supplied in the annealed and pickled condition, Or in polished condition
Marking & Traceability Each Stainless Steel 316Ti Tubing is traceable to its producing mill and heat by an identification number etched within 24" (610mm) of one end.
316Ti stainless steel tubing Test Certificate Manufacturer Test Certificate according to EN 10204 3.1 B
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection
316Ti stainless steel tubing Testing & Inspection Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing
We can also cut, thread, and groove Stainless Steel 316Ti Tubes to meet your specifications

Stainless Steel 316Ti Tube Wall Thickness

028 = .028" Thick
035 = .035" Thick
039 = .039" Thick
049 = .049" Thick
065 = .065" Thick
083 = .083" Thick
109 = .109" Thick

SA312 TP316TI Tubing Tolerances

The Stainless Steel 316Ti tubes outer diameter (OD) are according to ASTM A269/A213. Stainless Steel 316Ti Tubing Tolerance specifications are as per below:

Stainless Steel 316Ti Tube OD Stainless Steel 316Ti Tube Tolerance
4mm to 35mm +/- 0.08mm
35mm to 38mm +/- 0.15mm
38mm to 60mm +/- 0.20mm
60mm and above +/- 0.25mm

Huge stock of ASTM A358 TP316Ti Stainless Steel Pipes & Tubes in India

Stainless Steel 316Ti Coiled Tubing
Stainless Steel 316Ti Coiled Tubing
AISI 316Ti Capillary Tube
AISI 316Ti Capillary Tube
SA312 TP316TI U Shaped tubing
SA312 TP316TI ‘U’ Shaped tubing
316ti Seamless Tube
316ti Seamless Tube
A312 TP316TI seamless tubing
A312 TP316TI seamless tubing
ASTM A312 TP316TI Thin Wall tube
ASTM A312 TP316TI Thin Wall tube
AISI 316ti Tubes
AISI 316ti Tubes
ASTM A312 gr TP 316Ti Gas Tube
ASTM A312 gr TP 316Ti Gas Tube
SS 316Ti Heat Exchanger Tubes
SS 316Ti Heat Exchanger Tubes
SS UNS S31635 boiler tube
SS UNS S31635 boiler tube
Stainless Steel WERKSTOFF NR. 1.4571 welded tubing
Stainless Steel WERKSTOFF NR. 1.4571 welded tubing
GOST 08Ch17N13M2T Square Tubing
GOST 08Ch17N13M2T Square Tubing
SS 316Ti Hollow Section
SS 316Ti Hollow Section
ASTM A249 TP 316TI Stainless Steel Rectangle Tube
ASTM A249 TP 316TI Stainless Steel Rectangle Tube
SS 316TI tubing
SS 316TI tubing

Types of Stainless Steel 316Ti Seamless & Welded Tubes

Din 1.4571 Stainless Steel Welded Pipes ASTM A358 TP316Ti Coil Tubing Heat Exchanger
JIS SUS316Ti Seamless Tubes Din 1.4571 Stainless Steel Tube
SA312 TP316Ti Welded Tubes AISI 316Ti Seamless Tube
Material 1.4571 Aisi 316Ti Slotted Handrail Tube SA312 TP316Ti Thin Wall Tube
SA213 TP 316Ti Thick Wall Tube En 1.4571 / Aisi 316Ti Hydraulic Tubing
Stainless Steel 316Ti Grade Pipe Type 316Ti Stainless Steel Polished Pipes
ASTM A312 TP316Ti Elliptical Tubes ASTM A213 SS TP 316Ti Stainless Steel Rectangular Tube
316Ti Stainless Steel Oval Tubing SS 316Ti Needle Tube
SAE J405 Uns S31635 Thin Wall Tubing 316Ti Stainless Steel Metric Tubing
316Ti Stainless Steel Seamless Square Tubing Large Diameter 316Ti Stainless Steel Tube
ASTM A269 TP316Ti straight tube 316Ti Stainless Steel Welded Tube
ASTM A249 TP316Ti Mirror Tube Jis 316Ti Stainless Steel Tubing
High-pressure 316Ti Stainless Steel Water Pipe Stainless Steel 316Ti Hexagonal Pipe
Din W.-Nr. 1.4571 Aisi 316Ti Corrugated Tube Stainless Steel 316Ti Round Tube
ASTM A312 TP316Ti erw 316Ti Stainless Steel Spiral Pipe
316Ti Stainless Steel Rectangular Pipe 316Ti Stainless Steel Hypodermic Tubing for Medical Needle
SA 312 TP316Ti Seamless Tubing Polished 316Ti Stainless Steel Tubing
ASME SA213 TP316Ti Perforated Tube Din 1.4571 Material Tube
SA 688 TP316Ti Finned Tube SA312 TP316Ti Dom Tube
Schedule 10 Type 316Ti Stainless Steel Pipe Schedule 40 Type 316Ti Stainless Steel Pipe
316Ti Stainless Steel Threaded Pipe SUS 316Ti Stainless Steel Rectangular Tube
Din 1.4571 AISI 316Ti Perforated Exhaust Tube Stainless Steel 316Ti Hypodermic Tubing
316Ti Stainless Steel ERW Pipes Corrugated 316Ti Stainless Steel Tube (CSST) for Gas
UNS S31635 Seamless Pipes Stainless Steel 316Ti Seamless Round Tubing
ASTM A358 TP316Ti Polished Tubing 316Ti Stainless Steel Ornamental Tube
S31635 Stainless Steel U Shaped Tube 316Ti Stainless Steel Square Tube Mirror Finish
Din 1.4571 Material Seamless Tubing WERKSTOFF NR. 1.4571 Coaxial Tube
1.4571 Instrument Tubing 316Ti Stainless Steel Square Tubing
Ultra-High Purity Electropolished Stainless Steel 316Ti Tube Thin Wall S31635 Stainless Steel Pipe
Stainless Steel 316Ti Ornamental Pipe Stainless Steel 316Ti Fin Tube / Finned Tube
ASTM A312 TP316Ti Coiled Tubing Stainless Steel Inox 316Ti Capillary Tubing
ASTM A312 gr TP 316Ti Aerospace tubes SA312 TP316Ti Electric Fusion Welding Pipes
SS 316Ti Erw Pipe 316Ti Stainless Steel Instrumentation Tubing
ASTM A213 TP316Ti Condenser Tube Stainless Steel 316Ti Welded Pipe & Tube
Jis 316Ti Stainless Steel Coil Tubing Stainless Steel 316Ti Seamless Pipe

AISI 316ti Tube Properties

316Ti Stainless Steel mechanical properties & chemical composition

316TI Stainless Steel Tube Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
316TI min. 16.0 2.0-3.0 10.0
max. 0.08 2.0 0.75 0.045 0.030 18.0 14.0 0.1
Stainless Steel 316TI Tubes Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316TI 515 205 35 75 205
Stainless Steel 316TI Tube Physical Properties
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316TI 8000 193 15.9 16.2 17.0 14.2 18.7 500 740

1.4541 Stainless Steel Equivalent

1.4541 stainless steel equivalent is that of UNS CODE S32100, ASTM 321, KS STS 321, JIS SUS 321 and DIN 1.4541. 1.4541 stainless steel is also known as Grade 321 stainless steel. 1.4541 stainless steel is a grade of stainless steel that is heat resistant. The key property of 1.4541 stainless steel is that titanium has been added to it. Because of the addition of titanium, 1.4541 stainless steel is resistant to carbide precipitation and it is also resistant to oxidation. 1.4541 stainless steel is primarily used in the building industry and the chemical industry.

Equivalent Grades for 316TI Stainless Steel Pipes & Tubes
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316TI 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

 

Types Out diameter Sizes Length
NB Sizes (in stock) .0035” ~ 8” 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" Cut to length
Stainless Steel 316Ti Seamless Tube (Custom Sizes) 6.35 mm OD To 101.6 mm OD  As per requirement Cut to length
Stainless Steel 316Ti Welded Tube (ERW Tube) (in Stock + Custom Sizes) 6.35 mm OD To 152 mm OD As per requirement Cut to length

AISI 316ti Pipe Hardness

AISI 316Ti pipe hardness is that of Rockwell B Hardness 79 and Vickers Hardness 152. AISI 316Ti stainless steel has a Knoop Hardness of 166 and a Brinell Hardness of 146. AISI 316Ti stainless steel will maintain its toughness and strength, even at sub-zero temperatures. The Elongation at Break of AISI 316Ti stainless steel is 30%. The Electrical Resistivity of AISI 316Ti stainless steel is 7.2e-005 ohm-cm. AISI 316Ti stainless steel is used in various industries and applications such as piping, storage tanks, exhaust systems, furnace parts, heat exchangers, chemical plants, bellows, chimney and stack liners, etc.

Stainless Steel 316Ti Seamless Tubes Surface Finish

Surface Finish Internal Surface(ID) Exterbal Surface(OD)
Roughness Average(RA) Roughness Average(RA)
μ inch μm μ inch μm
AP Annealed & Pickled Not defined Not defined 40 or Not defined 1.0 or Not defined
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8

ASTM A312 TP316ti Stainless Steel Pipe Sizes

1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)  
SCH 5, 10, 40, 80, 160, XXH  

 

Aircraft Materials & Aerospace Materials Specialist

Stainless Steel 316Ti Tube stockist | Stainless Steel 316Ti Tube suppliers | Stainless Steel 316Ti Tube manufacturer in India | Stainless Steel 316Ti Tube Stock