Nimonic 901 plate suppliers

Nimonic 901 sheet and coil exporter in India

Alloy 901 Polished Plate, Nimonic Alloy 901 strip suppliers in Mumbai, India

Nimonic 901 Plate
Nimonic 901 Plate
Nimonic 901 Sheet
Nimonic 901 Sheet
Nimonic 901 Coil
Nimonic 901 Coil

Nimonic 901 Plate (UNS N09901/W.Nr. 2.4662) is an age-hardenable Ni-Fe-Cr superalloy with significant additions of molybdenum, titanium and aluminum. Nimonic 901 Sheet from Special Metals is a NIMONIC alloy, available in the following form including Nimonic 901 Rolling Plates, Nimonic 901 Clad Plate, Nimonic 901 Shim, Nimonic 901 Rolling Sheets, Nimonic 901 Flat Sheet, Nimonic Alloy 901 Plate, Nimonic 901 Flat Shim, Nimonic 901 Perforated Plate, Nimonic 901 Hot rolled Plate and Nimonic 901 Cold rolled Plate. Alloy 901 Plate has high yield strength and creep resistance at temperatures to about 1110°F (600°C). It is always recommended that heavy duty machining equipment and tooling such as carbide tools should be used before Nimonic 901 Coil cutting is performed, this help to reduce chatter or work-hardening of Nimonic 901 Plates.

If you are looking for Alloy 901 Plate feel free to contact at stindia@stindia.com for any assistance. Our support team will give you prompt response to all your queries even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 901 sheet and Nimonic Alloy 901 plate in various qualities, sizes and grades which are equivalent to Nimonic 901 Sheet & Nimonic 901 Plate (2mm to 12mm). Nimonic 901 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 901 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 901 Sheets, thin and ultra-thin gauge Nimonic Alloy 901 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 901 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 901 Polished Plate by pickling or buff-polishing. Nimonic 901 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 901 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 901 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 901 plates based on dimensions and shape. Nimonic 901 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Nimonic 901 plates in shortest time as well at best price, because we maintain Nimonic 901 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 901 sheet from any other vendor or Manufacturer of mirror finish Nimonic 901 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

Nimonic 901 Plate Price

Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Price in India Indian Rs 1200/- $17 €14 Cut to Size
Price in Japan Japanese Rs 1400/- $21 €18 Fix Length
Price in UK / Europe European Rs 1500/- $22 €19 Fix Length
Price in USA USA Rs 1600/- $24 €20 Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 901 plate Specification

Plate Specification MSRR, AMS, BS, ASTM B463
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
AMS AMS 5660
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished plate
profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Clad plate: Clad plate is a composite steel plate made by bonding , etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 901 Plate

Nimonic 901 2B Sheet
Nimonic 901 2B Sheet
Decorative 8K Mirror Nimonic 901 Sheet
Decorative 8K Mirror Nimonic 901 Sheet
Hairline Nimonic 901 Sheet
Hairline Nimonic 901 Sheet
No.4 Nimonic 901 Sheet
No.4 Nimonic 901 Sheet
Nimonic 901 Plate
Nimonic 901 Plate
Nimonic 901 Sheet
Nimonic 901 Sheet
Nimonic 901 Coil
Nimonic 901 Coil
Nimonic 901 Clad Plate
Nimonic 901 Clad Plate
Nimonic 901 Strips
Nimonic 901 Strips
Nimonic 901 Shim Stock
Nimonic 901 Shim Stock
Nimonic 901 Rolling Sheets
Nimonic 901 Rolling Sheets
Nimonic 901 Flat Sheet
Nimonic 901 Flat Sheet
Nimonic 901 Rolling Plate
Nimonic 901 Rolling Plate
Nimonic 901 Flat Shim
Nimonic 901 Flat Shim
Nimonic 901 Perforated Plate
Nimonic 901 Perforated Plate
Nimonic 901 Polished Plate
Nimonic 901 Polished Plate
Nimonic 901 cold rolled sheet
Nimonic 901 cold rolled sheet
Nimonic 901 hot rolled plate
Nimonic 901 hot rolled plate
Nimonic Alloy 901 Plate
Nimonic Alloy 901 Plate
Nimonic Alloy 901 Sheet
Nimonic Alloy 901 Sheet
Nimonic 901 Quarto Plate
Nimonic 901 Quarto Plate
Nimonic 901 Precision Strip
Nimonic 901 Precision Strip
Nimonic Alloy 901 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 901 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 901 Hot Rolled Coil, Strip And Plate
Nimonic Alloy 901 Hot Rolled Coil, Strip And Plate

Difference between Nimonic 901 Sheet, Plate & Foil

Nimonic 901 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 901 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 901 Sheet.

If thickness less than 0.15mm is then its a Nimonic 901 Foil.

Nimonic 901 Plate Properties

Nimonic 901 Plate mechanical properties

Specifications
UNS N09901
Werkstoff Number 2.4662
BR HR 55
AMS 5660
AMS 5661
AECMA PrEN2176
AECMA PrEN2177
ISO 9723
ISO 9725
MSRR 7029, MSRR 7031 
Nimonic alloy 901 (tradename)

Nimonic 901 Plates Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Nimonic 901 2.4662 N09901

Nimonic 901 Plates Chemical Composition :

Weight% Ni Cr Mo Ti Co Cu Mn Si Al C S Fe
Nimonic Alloy 901 42.5 12.5 5.75 2.9 1.0 max 0.5 max 0.5 max 0.4 max 0.35 max 0.1 max 0.03 max Bal

ASTM B463 Nimonic 901 Plates Mechanical Properties:

Material Tensile Strength ksi Yield Strength ksi Elongation in 4D(%) Reduction of Area % Hardness HB
Alloy 901 150 100 12 15 302-388

Heat Treatment:
Solution Treatment: 1975-2025°F / 2 hrs + Air Cool
Stabilization Heat Treatment: 1425 – 1475°F / 2-4 hrs + Air Cool
Precipitation Heat Treatment: 1325 – 1375 / 24 hrs +Any Cool 

Alloy 901 plate suppliers

Alloy 901 plate Stock