Nimonic 80A Plate suppliers

ASTM B637 uns n07080, Nimonic 80a sheet and coil supplier

Nimonic 80A Polished Plate, Nimonic 80A Coil Suppliers in India

Nimonic 80A Plate
Nimonic 80A Plate
Nimonic 80A Sheet
Nimonic 80A Sheet
Nimonic 80A Coil
Nimonic 80A Coil

Alloy 80A Plate is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. Nimonic 80A Plate is manufactured by high-frequency melting and casting in air. If compare few features of Nimonic 80A Sheet the you will find Nimonic 80A Clad Plate is similar to NIMONIC alloy 75 plate. Nimonic 80A Shim has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F). Nimonic 80A Rolling Sheets can be welded using common techniques, using a matching filler metal. Nimonic 80A Coil can be hot worked at temperature ranges of 1050-1200°C (1920-2190°F). These Nimonic Alloy 80A Plates can be hot forged at temperatures in the range of 982-1176°C (1800-2150°F). Nimonic 80A Rolling Plate should be annealed at 1079°C (1975°F) for about 8 hours and air cooled. Nimonic 80A Flat Shim from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 80A Perforated Plate, Nimonic 80A Hot rolled Plate & Nimonic 80A Cold rolled Plate. Nimonic® 80A Plate is also known as Nicrofer 7520 Ti sheet, Pyromet 80A sheet, Superimphy 80A sheet, and Udimet 80A sheet.

If you are looking for Nimonic 80A Flat Sheet feel free to contact at stindia@stindia.com for any assistance. Our support team will give you prompt response to all your queries even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 80A sheet and Nimonic Alloy 80A plate in various qualities, sizes and grades which are equivalent to Nimonic 80A Sheet & Nimonic 80A Plate (2mm to 12mm). Nimonic 80A Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 80A plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 80A Sheets, thin and ultra-thin gauge Nimonic Alloy 80A strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 80A Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 80A Polished Plate by pickling or buff-polishing. Nimonic 80A Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 80A Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 80A Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 80A plates based on dimensions and shape. Nimonic 80A Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Nimonic 80A plates in shortest time as well at best price, because we maintain Nimonic 80A Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 80A sheet from any other vendor or Manufacturer of mirror finish Nimonic 80A plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

Nimonic 80A Plate Price

Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Price in India Indian Rs 1200/- $17 €14 Cut to Size
Price in Japan Japanese Rs 1400/- $21 €18 Fix Length
Price in UK / Europe European Rs 1500/- $22 €19 Fix Length
Price in USA USA Rs 1600/- $24 €20 Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 80A plate Specification

Plate Specification MSRR, AMS, BS, ASTM B463
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
AMS AMS
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished plate
profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Clad plate: Clad plate is a composite steel plate made by bonding , etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 80A Plate

Nimonic 80A 2B Sheet
Nimonic 80A 2B Sheet
Decorative 8K Mirror Nimonic 80A Sheet
Decorative 8K Mirror Nimonic 80A Sheet
Hairline Nimonic 80A Sheet
Hairline Nimonic 80A Sheet
No.4 Nimonic 80A Sheet
No.4 Nimonic 80A Sheet
Nimonic 80A Plate
Nimonic 80A Plate
Nimonic 80A Sheet
Nimonic 80A Sheet
Nimonic 80A Coil
Nimonic 80A Coil
Nimonic 80A Clad Plate
Nimonic 80A Clad Plate
Nimonic 80A Strips
Nimonic 80A Strips
Nimonic 80A Shim Stock
Nimonic 80A Shim Stock
Nimonic 80A Rolling Sheets
Nimonic 80A Rolling Sheets
Nimonic 80A Flat Sheet
Nimonic 80A Flat Sheet
Nimonic 80A Rolling Plate
Nimonic 80A Rolling Plate
Nimonic 80A Flat Shim
Nimonic 80A Flat Shim
Nimonic 80A Perforated Plate
Nimonic 80A Perforated Plate
Nimonic 80A Polished Plate
Nimonic 80A Polished Plate
Nimonic 80A cold rolled sheet
Nimonic 80A cold rolled sheet
Nimonic 80A hot rolled plate
Nimonic 80A hot rolled plate
Nimonic Alloy 80A Plate
Nimonic Alloy 80A Plate
Nimonic Alloy 80A Sheet
Nimonic Alloy 80A Sheet
Nimonic 80A Quarto Plate
Nimonic 80A Quarto Plate
Nimonic 80A Precision Strip
Nimonic 80A Precision Strip
Nimonic Alloy 80A Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 80A Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 80A Hot Rolled Coil, Strip And Plate
Nimonic Alloy 80A Hot Rolled Coil, Strip And Plate

Difference between Nimonic 80A Sheet, Plate & Foil

Nimonic 80A Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 80A Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 80A Sheet.

If thickness less than 0.15mm is then its a Nimonic 80A Foil.

Nimonic 80A Plate Properties

Nimonic 80A Plate mechanical properties

Nimonic 80 Plates Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Nimonic 80 2.4952 N07080

Nimonic 80 Plates Chemical Composition :

Grade Al B C Cr Co Cu Fe Mn Ni P Si S
Nimonic 80 1 – 1.8 0.008 max 0.1 max 18 – 21 0.2 max 0.2 max 3 max 1 max Balance 0.045 max 1 max 0.015 max

ASTM B463 Nimonic 80 Plates Mechanical Properties:

Grade
Condition Ultimate Tensile Strength MPA Yield Strength MPA Elongation on 4D (min) Hardness min
Nimonic 80 Solution Annealed & Precipatation Treated (aged) 994 616 20 300 HV

Nimonic 80 Plates Physical Properties:

Grade Density (lb / cu. in.) Specific Gravity Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) Electrical Resistivity (microhm-cm (at 68 Deg F) Melting Point (Deg F) Thermal Conductivity Mean Coeff Thermal Expansion Magnetic Permeability Modulus of Elasticity Tension
Nimonic 80 0.295 8.19 0.11 746 2450 77 7 1 30

Alloy 80A plate suppliers

Alloy 80A plate manufacturer in India