Nimonic 75 plate supplier

Nimonic 75 Sheet, Nimonic 75 Polished Plate in India

Nimonic 75 Coil, Nimonic Alloy 75 strip distributor

Nimonic 75 Plate
Nimonic 75 Plate
Nimonic 75 Sheet
Nimonic 75 Sheet
Nimonic 75 Coil
Nimonic 75 Coil

Nimonic 75 Plate is a Nickel-Chromium alloy with good corrosion and heat resistance. Nimonic 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. Nimonic 75 Sheet are primarily composed of nickel and chromium. These Nimonic 75 Coil are mainly known for their high performance and high-temperature low-creep. All Nimonic 75 Rolling Sheets has high creep-rupture properties at temperatures to about 1740°F (950°C). Nimonic 75 Flat Sheet is in demand by many industries such as gas turbines for blades, discs, and shafts. Nimonic® 75 is also known as Nicrofer 7520. Nimonic 75 is readily fabricated and welded. Nimonic 75 alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Nimonic Alloy 75 Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 75 Clad Plate and Nimonic 75 Shim.

If you are looking for Nimonic 75 Rolling Plate feel free to contact at stindia@stindia.com for any assistance of Nimonic 75 Flat Shim & Nimonic 75 Perforated Plate as well Nimonic 75 Hot rolled Plate welding. Our support team will give you prompt response to all your queries regarding Nimonic 75 Cold rolled Plate even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 75 sheet and Nimonic Alloy 75 plate in various qualities, sizes and grades which are equivalent to Nimonic 75 Sheet & Nimonic 75 Plate (2mm to 12mm). Nimonic 75 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 75 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 75 Sheets, thin and ultra-thin gauge Nimonic Alloy 75 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 75 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 75 Polished Plate by pickling or buff-polishing. Nimonic 75 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 75 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 75 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 75 plates based on dimensions and shape. Nimonic 75 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Nimonic 75 plates in shortest time as well at best price, because we maintain Nimonic 75 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 75 sheet from any other vendor or Manufacturer of mirror finish Nimonic 75 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

Nimonic 75 Plate Price

Alloy 75 Sheet Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Alloy 75 Sheet Price in India Indian Rs 1200/- $17 €14 Cut to Size
Alloy 75 Sheet Price in Japan Japanese Rs 1400/- $21 €18 Fix Length
Alloy 75 Sheet Price in UK / Europe European Rs 1500/- $22 €19 Fix Length
Alloy 75 Sheet Price in USA USA Rs 1600/- $24 €20 Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 75 plate Specification

Plate Specification MSRR, AMS, BS, ASTM B463
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
AMS AMS
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished plate
profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Clad plate: Clad plate is a composite steel plate made by bonding , etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 75 Plate

Nimonic 75 2B Sheet
Nimonic 75 2B Sheet
Decorative 8K Mirror Nimonic 75 Sheet
Decorative 8K Mirror Nimonic 75 Sheet
Hairline Nimonic 75 Sheet
Hairline Nimonic 75 Sheet
No.4 Nimonic 75 Sheet
No.4 Nimonic 75 Sheet
Nimonic 75 Plate
Nimonic 75 Plate
Nimonic 75 Sheet
Nimonic 75 Sheet
Nimonic 75 Coil
Nimonic 75 Coil
Nimonic 75 Clad Plate
Nimonic 75 Clad Plate
Nimonic 75 Strips
Nimonic 75 Strips
Nimonic 75 Shim Stock
Nimonic 75 Shim Stock
Nimonic 75 Rolling Sheets
Nimonic 75 Rolling Sheets
Nimonic 75 Flat Sheet
Nimonic 75 Flat Sheet
Nimonic 75 Rolling Plate
Nimonic 75 Rolling Plate
Nimonic 75 Flat Shim
Nimonic 75 Flat Shim
Nimonic 75 Perforated Plate
Nimonic 75 Perforated Plate
Nimonic 75 Polished Plate
Nimonic 75 Polished Plate
Nimonic 75 cold rolled sheet
Nimonic 75 cold rolled sheet
Nimonic 75 hot rolled plate
Nimonic 75 hot rolled plate
Nimonic Alloy 75 Plate
Nimonic Alloy 75 Plate
Nimonic Alloy 75 Sheet
Nimonic Alloy 75 Sheet
Nimonic 75 Quarto Plate
Nimonic 75 Quarto Plate
Nimonic 75 Precision Strip
Nimonic 75 Precision Strip
Nimonic Alloy 75 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 75 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 75 Hot Rolled Coil, Strip And Plate
Nimonic Alloy 75 Hot Rolled Coil, Strip And Plate

NIMONIC 75 Plate Stock List

Alloy Product form Dimension
ALLOY 75 (80 Ni/20 Cr) Strip; cold rolled, annealed 0.20x10 mm x coil, 0.017 kg/m
ALLOY 75 (80 Ni/20 Cr) Strip; cold rolled, annealed 0.22x12 mm x coil, 0.02 kg/m
ALLOY 75 (80 Ni/20 Cr) Sheet; cold rolled, annealed 0.6x600x850 mm, 2.6 kg/pc
ALLOY 75 (80 Ni/20 Cr) Sheet; cold rolled, pickled, annealed 0.8x1000x2000 mm, 13.9 kg/pc
ALLOY 75 (80 Ni/20 Cr) Sheet; cold rolled, pickled, annealed 1.0x1000x2000 mm, 17.15 kg/pc
ALLOY 75 (80 Ni/20 Cr) Sheet; cold rolled, sol. annealed, descaled, sheared 1.6x1200x3000 mm, 49 kg/pc
ALLOY 75 (80 Ni/20 Cr) Sheet; cold rolled, pickled, annealed 2.5x1000x2000 mm, 41.87 kg/pc
ALLOY 75 (80 Ni/20 Cr) Sheet; hot rolled, annealed, descaled 3.2x1200x3000 mm, 100.8 kg/pc

Difference between Nimonic 75 Sheet, Plate & Foil

Nimonic 75 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 75 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 75 Sheet.

If thickness less than 0.15mm is then its a Nimonic 75 Foil.

Nimonic 75 Plate Properties

Alloy 75 Plate mechanical properties

Alloy 75 Plates Equivalent Grades

STANDARD WERKSTOFF NR. UNS
Alloy 75 2.4951 N06075

Alloy 75 Plates Chemical Composition :

Grade Ni Cr Fe P Cu Al Ti C Mn Si
Alloy 75 Bal. 19-22 Max 1.0 Max 0.015 Max 0.2 Max 0.15 0.15-0.35 Max 0.12 Max 0.70 Max 0.80 Max 0.02

ASTM B463 Alloy 75 Plates Mechanical Properties:

Grade
Alloy 75
Tensile strength(annealed) Yield strength(annealed) Elongation at Break Modulus of Elasticity
Metric 750 MPa 275 MPa 42% 206 GPa
Imperial 109 ksi 40 ksi 42% 29878 ksi

Alloy 75 Plates Physical Properties:

Grade Density Melting Point
Nimonic 75 8.4 g/cm3 1374°C-1420 °C
Nimonic 75 plate stockist

Nimonic 75 plate manufacturer in India