Nimonic 115 plate suppliers

Nimonic 115 sheet and strip suppliers

Nimonic 115 Polished Plate, Nimonic 115 Coil Suppliers in Mumbai, India

Nimonic 115 Plate
Nimonic 115 Plate
Nimonic 115 Sheet
Nimonic 115 Sheet
Nimonic 115 Coil
Nimonic 115 Coil

Nimonic 115 Plate and Nimonic 115 Sheet are made up of nickel and chromium. Nimonic 115 Coil is similar to NIMONIC alloy 105 plate but has higher levels of aluminium and titanium for increased strengthening by precipitation hardening. The alloy has high strength and creep resistance at temperatures to about 1850°F (1010°C). Nimonic 115 Rolling Sheets mainly suitable to use for as gas turbine combustion chambers, afterburner parts and heattreatment furnace equipment. turbine blades in aircraft gas turbines. Nimonic 115 Clad Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 115 Flat Sheet, Nimonic Alloy 115 Plate, Nimonic 115 Rolling Plate, Nimonic 115 Flat Shim, Nimonic 115 Perforated Plate, Nimonic 115 Hot rolled Plate etc. These Nimonic 115 Cold rolled Plates and Alloy 115 Plate with 100% ultrasonic test according to EN102768-3, SA388, ASTM A520-1974, Sep 1921 C/c etc..

If you are looking for Nimonic 115 Shim feel free to contact at stindia@stindia.com for any assistance. Our support team will give you prompt response to all your queries even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 115 sheet and Nimonic Alloy 115 plate in various qualities, sizes and grades which are equivalent to Nimonic 115 Sheet & Nimonic 115 Plate (2mm to 12mm). Nimonic 115 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 115 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 115 Sheets, thin and ultra-thin gauge Nimonic Alloy 115 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 115 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 115 Polished Plate by pickling or buff-polishing. Nimonic 115 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 115 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 115 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 115 plates based on dimensions and shape. Nimonic 115 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Nimonic 115 plates in shortest time as well at best price, because we maintain Nimonic 115 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 115 sheet from any other vendor or Manufacturer of mirror finish Nimonic 115 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

Nimonic 115 Plate Price

Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Price in India Indian Rs 1200/- $17 €14 Cut to Size
Price in Japan Japanese Rs 1400/- $21 €18 Fix Length
Price in UK / Europe European Rs 1500/- $22 €19 Fix Length
Price in USA USA Rs 1600/- $24 €20 Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 115 plate Specification

Plate Specification MSRR, AMS, BS, ASTM B463
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
AMS AMS
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished plate
profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Clad plate: Clad plate is a composite steel plate made by bonding , etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 115 Plate

Nimonic 115 2B Sheet
Nimonic 115 2B Sheet
Decorative 8K Mirror Nimonic 115 Sheet
Decorative 8K Mirror Nimonic 115 Sheet
Hairline Nimonic 115 Sheet
Hairline Nimonic 115 Sheet
No.4 Nimonic 115 Sheet
No.4 Nimonic 115 Sheet
Nimonic 115 Plate
Nimonic 115 Plate
Nimonic 115 Sheet
Nimonic 115 Sheet
Nimonic 115 Coil
Nimonic 115 Coil
Nimonic 115 Clad Plate
Nimonic 115 Clad Plate
Nimonic 115 Strips
Nimonic 115 Strips
Nimonic 115 Shim Stock
Nimonic 115 Shim Stock
Nimonic 115 Rolling Sheets
Nimonic 115 Rolling Sheets
Nimonic 115 Flat Sheet
Nimonic 115 Flat Sheet
Nimonic 115 Rolling Plate
Nimonic 115 Rolling Plate
Nimonic 115 Flat Shim
Nimonic 115 Flat Shim
Nimonic 115 Perforated Plate
Nimonic 115 Perforated Plate
Nimonic 115 Polished Plate
Nimonic 115 Polished Plate
Nimonic 115 cold rolled sheet
Nimonic 115 cold rolled sheet
Nimonic 115 hot rolled plate
Nimonic 115 hot rolled plate
Nimonic Alloy 115 Plate
Nimonic Alloy 115 Plate
Nimonic Alloy 115 Sheet
Nimonic Alloy 115 Sheet
Nimonic 115 Quarto Plate
Nimonic 115 Quarto Plate
Nimonic 115 Precision Strip
Nimonic 115 Precision Strip
Nimonic Alloy 115 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 115 Cold Rolled Coil, Strip And Sheet
Nimonic Alloy 115 Hot Rolled Coil, Strip And Plate
Nimonic Alloy 115 Hot Rolled Coil, Strip And Plate

Difference between Nimonic 115 Sheet, Plate & Foil

Nimonic 115 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 115 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 115 Sheet.

If thickness less than 0.15mm is then its a Nimonic 115 Foil.

Nimonic 115 Plate Properties

Nimonic 115 Plate Equivalent Grades

Alloy Name Trade Name UNS No. British Specs American Specs German Specs French Specs
Alloy 115 Nimonic 115   BS HR4   WS 2.4636 AFNOR NCK 15ATD

Nimonic 115 Plate chemical composition

Element Content (%)
Nickel, Ni 54
Chromium, Cr 14.0-16.0
Cobalt, Co 13.0-15.5
Aluminum, Al 4.50-5.50
Molybdenum, Mo 3.0-5.0
Titanium, Ti 3.50-4.50
Iron, Fe  1.0
Manganese, Mn  1.0
Silicon, Si  1.0
Copper, Cu  0.20
Zirconium, Zr  0.15
Carbon, C 0.12-0.20
Sulfur, S  0.015
Boron, B 0.010-0.025

Nimonic 115 Plate physical properties

Properties Metric Imperial
Density 7.85 g/cm³ 0.284 lb/in³
Melting point 1304°C 2380°F

Nimonic 115 Plate mechanical properties

Properties Metric Imperial
Tensile strength (precipitation hardened, value at room temperature) 1300 MPa 189000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) 850 MPa 123000 psi
Elongation at break (precipitation hardened) 25.00% 25.00%

Nimonic 115 Plate Welding

Welding techniques recommended for Nimonic 115™ include gas-tungsten arc welding, gas metal-arc welding, submerged-arc welding and shielded metal-arc welding. 

Nimonic 115 plate suppliers

Nimonic 115 plate Stock