Nimonic 90 plate suppliers

Nimonic 90 sheet and coil supplier in India

Alloy 90 Polished Plate, Nimonic Alloy 90 strip distributor in Mumbai

Nimonic 90 Plate is a precipitation-hardenable nickel-chromium-cobalt alloy having high stress-rupture strength and creep resistance at temperatures to about 1700°F (920°C). Because of good resistance to high-temperature corrosion and oxidation. Alloy 90 Plate became the prime choice of Oil & Gas Extraction and Processing, Nuclear, Aerospace, Power Generation and Automotive, gas turbines, hot-working tools, and springs applications and It is widely used and a well proven alloy in high temperature conditions. The Density of Nimonic 90 Sheet is 0.296 lb/in³, (8.18 g/cm³). Nimonic 90 Coil can be forged between 2100 and 1850ºF (1150 and 1010ºC) after which process it may be air cooled or water quenched, depending upon the size and intricacy of the forged part of Nimonic 90 Clad Plate. Nimonic 90 Shim from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 90 Rolling Sheets, Nimonic 90 Flat Sheet, Nimonic Alloy 90 Plate, Nimonic 90 Rolling Plate and Nimonic 90 Flat Shim. Nimonic® 90 Perforated Plates is also known as Superimphy 90 Plate, Pyromet 90 Plate, and Udimet 90 Plate.

If you are looking for Nimonic 90 Hot rolled Plates feel free to contact at stindia@stindia.com for any assistance of Nimonic 90 Cold rolled Plate. Our support team will give you prompt response to all your queries regarding Nimonic 90 Plates even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 90 sheet and Nimonic Alloy 90 plate in various qualities, sizes and grades which are equivalent to Nimonic 90 Sheet & Nimonic 90 Plate (2mm to 12mm). Nimonic 90 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 90 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 90 Sheets, thin and ultra-thin gauge Nimonic Alloy 90 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 90 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 90 Polished Plate by pickling or buff-polishing. Nimonic 90 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 90 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 90 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 90 plates based on dimensions and shape. Nimonic 90 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in India arrange complete range of Nimonic 90 plates in shortest time as well at best price, because we maintain Nimonic 90 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 90 sheet from any other vendor or Manufacturer of mirror finish Nimonic 90 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 Nimonic 90 plate Weight Calculator 

Nimonic 90 Plate Price

Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
Price in India	Indian	Rs 1200/-	$17	€14	Cut to Size
Price in Japan	Japanese	Rs 1400/-	$21	€18	Fix Length
Price in UK / Europe	European	Rs 1500/-	$22	€19	Fix Length
Price in USA	USA	Rs 1600/-	$24	€20	Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 90 plate Specification

Plate Specification	MSRR, AMS, BS, ASTM B463
Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness	0.1mm to 100 mm Thk
Width	10-2500mm
AMS	AMS
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of	Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished plate
profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Clad plate: Clad plate is a composite steel plate made by bonding , etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 90 Plate

NIMONIC 90 PLATE STOCK LIST

Alloy	Product form	Dimension
ALLOY 90 (55 Ni/20 Cr/17 Co)	Strip; cold rolled	0.20x25 mm x coil, 0.04 kg/m
ALLOY 90 (55 Ni/20 Cr/17 Co)	Strip; spring temper	0.20x100 mm x coil, 0.16 kg/m
ALLOY 90 (55 Ni/20 Cr/17 Co)	Strip; spring temper	0.50x100 mm x coil, 0.4 kg/m
ALLOY 90 (55Ni/20Cr/17Co)	Sheet; cold rolled, pickled, softened	0.6x1000x2000 mm, 9.8 kg/pc
ALLOY 90 (55 Ni/20 Cr/17 Co)	Strip; spring temper	1.0x100 mm x coil, 0.79 kg/m
ALLOY 90 (55 Ni/20 Cr/17 Co)	Strip; spring temper	2.0x100 mm x coil, 1.57 kg/m
ALLOY 90 (55 Ni/19 Cr/16 Co)	Sheet; hot rolled, descaled, softened	4.75x1200x1750 mm, 81.6 kg/pc
BRUSH ALLOY 190 (2 Be/Cu)	Strip; tin plated	0.10x22 mm x coil, 0.02 kg/m

Difference between Nimonic 90 Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 90 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 90 Sheet.

If thickness less than 0.15mm is then its a Nimonic 90 Foil.

Nimonic 90 Plate Properties

Nimonic 90 Plate mechanical properties

Grade

Ni

Cr

Co

Ti

Al

C

Si

Cu

Fe

Mn

B

S

Zr

Pb

Nimonic 90

Bal

18-21

15-21

2-3

1-2

0.2 max

1.0 max

0.2 max

1.5 max

1.0 max

0.02 max

0.015 max

0.15 max

0.0020 max

Grade Material Sheet Temperature °C Yield Strength 0.2 % (MPa) Tensile Strength (MPa) Elongation (%) Hardness HV Nimonic 90 Nimonic 90 sheet Solution Treated (BS HR202) RT – – – 250 max Nimonic 90 sheet Precipitation Treated (BS HR 202) RT 695 min 1080 min 25 min (0.45mm-3.0mm) 280 min Nimonic 90 sheet Precipitation Treated (BS HR202) 500 740 (typical) 995 (typical) 30 – Alloy 90 Cold Rolled Sheet (Heat Treated) – – – – –

Nimonic 90 Plates Physical Properties:

Grade Density Specific Gravity Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) Electrical Resistivity (microhm-cm (at 68 Deg F) Melting Point (Deg F) Alloy 90 8.18g/cm³ 1370°C 12.7 μm/m °C (20 – 100°C) 82.5 kN/mm² 213 kN/mm² 227 / 240 kN/mm² 0.296 lb/in³ 2500°F 7.1 x 10-6 in/in °F (70 – 212°F) 11966 ksi 30894 ksi 32924 / 34810 ksi

Alloy 90 plate stockist

---

Alloy 90 plate manufacturer in India