Nimonic 75 plate supplier
Nimonic 75 Sheet, Nimonic 75 Polished Plate in India
Nimonic 75 Coil, Nimonic Alloy 75 strip distributor

Nimonic 75 Plate

Nimonic 75 Sheet

Nimonic 75 Coil
Nimonic 75 Plate is a Nickel-Chromium alloy with good corrosion and heat resistance. Nimonic 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. Nimonic 75 Sheet are primarily composed of nickel and chromium. These Nimonic 75 Coil are mainly known for their high performance and high-temperature low-creep. All Nimonic 75 Rolling Sheets has high creep-rupture properties at temperatures to about 1740°F (950°C). Nimonic 75 Flat Sheet is in demand by many industries such as gas turbines for blades, discs, and shafts. Nimonic® 75 is also known as Nicrofer 7520. Nimonic 75 is readily fabricated and welded. Nimonic 75 alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Nimonic Alloy 75 Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 75 Clad Plate and Nimonic 75 Shim.
If you are looking for Nimonic 75 Rolling Plate feel free to contact at stindia@stindia.com for any assistance of Nimonic 75 Flat Shim & Nimonic 75 Perforated Plate as well Nimonic 75 Hot rolled Plate welding. Our support team will give you prompt response to all your queries regarding Nimonic 75 Cold rolled Plate even on holidays.
Steel Tubes India offers one of the widest ranges of Nimonic Alloy 75 sheet and Nimonic Alloy 75 plate in various qualities, sizes and grades which are equivalent to Nimonic 75 Sheet & Nimonic 75 Plate (2mm to 12mm). Nimonic 75 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 75 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 75 Sheets, thin and ultra-thin gauge Nimonic Alloy 75 strip and foil products, rolled down to 2 microns.
Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 75 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 75 Polished Plate by pickling or buff-polishing. Nimonic 75 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 75 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 75 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 75 plates based on dimensions and shape. Nimonic 75 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.
Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Nimonic 75 plates in shortest time as well at best price, because we maintain Nimonic 75 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 75 sheet from any other vendor or Manufacturer of mirror finish Nimonic 75 plate in India.
Looking to buy Inconel Plate? Inconel Sheet?
Check price of Inconel Plate in India

Nimonic 75 Plate Price
Alloy 75 Sheet Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Alloy 75 Sheet Price in India | Indian | Rs 1200/- | $17 | €14 | Cut to Size |
Alloy 75 Sheet Price in Japan | Japanese | Rs 1400/- | $21 | €18 | Fix Length |
Alloy 75 Sheet Price in UK / Europe | European | Rs 1500/- | $22 | €19 | Fix Length |
Alloy 75 Sheet Price in USA | USA | Rs 1600/- | $24 | €20 | Fix Length |
Please note: Price is subject to change without any prior notice.
Nimonic 75 plate Specification
Types of Nimonic 75 Plate

Nimonic 75 2B Sheet

Decorative 8K Mirror Nimonic 75 Sheet

Hairline Nimonic 75 Sheet

No.4 Nimonic 75 Sheet

Nimonic 75 Plate

Nimonic 75 Sheet

Nimonic 75 Coil

Nimonic 75 Clad Plate

Nimonic 75 Strips

Nimonic 75 Shim Stock

Nimonic 75 Rolling Sheets

Nimonic 75 Flat Sheet

Nimonic 75 Rolling Plate

Nimonic 75 Flat Shim

Nimonic 75 Perforated Plate

Nimonic 75 Polished Plate

Nimonic 75 cold rolled sheet

Nimonic 75 hot rolled plate

Nimonic Alloy 75 Plate

Nimonic Alloy 75 Sheet

Nimonic 75 Quarto Plate

Nimonic 75 Precision Strip

Nimonic Alloy 75 Cold Rolled Coil, Strip And Sheet

Nimonic Alloy 75 Hot Rolled Coil, Strip And Plate
NIMONIC 75 Plate Stock List
Alloy | Product form | Dimension |
---|---|---|
ALLOY 75 (80 Ni/20 Cr) | Strip; cold rolled, annealed | 0.20x10 mm x coil, 0.017 kg/m |
ALLOY 75 (80 Ni/20 Cr) | Strip; cold rolled, annealed | 0.22x12 mm x coil, 0.02 kg/m |
ALLOY 75 (80 Ni/20 Cr) | Sheet; cold rolled, annealed | 0.6x600x850 mm, 2.6 kg/pc |
ALLOY 75 (80 Ni/20 Cr) | Sheet; cold rolled, pickled, annealed | 0.8x1000x2000 mm, 13.9 kg/pc |
ALLOY 75 (80 Ni/20 Cr) | Sheet; cold rolled, pickled, annealed | 1.0x1000x2000 mm, 17.15 kg/pc |
ALLOY 75 (80 Ni/20 Cr) | Sheet; cold rolled, sol. annealed, descaled, sheared | 1.6x1200x3000 mm, 49 kg/pc |
ALLOY 75 (80 Ni/20 Cr) | Sheet; cold rolled, pickled, annealed | 2.5x1000x2000 mm, 41.87 kg/pc |
ALLOY 75 (80 Ni/20 Cr) | Sheet; hot rolled, annealed, descaled | 3.2x1200x3000 mm, 100.8 kg/pc |
Difference between Nimonic 75 Sheet, Plate & Foil
Here are few points to recognised sheet, plate or foil:
If thickness greater than 6.35 mm is called a Nimonic 75 Plate.
If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 75 Sheet.
If thickness less than 0.15mm is then its a Nimonic 75 Foil.
Nimonic 75 Plate Properties
Alloy 75 Plate mechanical properties
Alloy 75 Plates Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
Alloy 75 | 2.4951 | N06075 |
Alloy 75 Plates Chemical Composition :
Grade | Ni | Cr | Fe | P | Cu | Al | Ti | C | Mn | Si | |
Alloy 75 | Bal. | 19-22 | Max 1.0 | Max 0.015 | Max 0.2 | Max 0.15 | 0.15-0.35 | Max 0.12 | Max 0.70 | Max 0.80 | Max 0.02 |
ASTM B463 Alloy 75 Plates Mechanical Properties:
|
Alloy 75 Plates Physical Properties:
|