Nimonic 115 plate suppliers

Nimonic 115 sheet and strip suppliers

Nimonic 115 Polished Plate, Nimonic 115 Coil Suppliers in Mumbai, India

Nimonic 115 Plate and Nimonic 115 Sheet are made up of nickel and chromium. Nimonic 115 Coil is similar to NIMONIC alloy 105 plate but has higher levels of aluminium and titanium for increased strengthening by precipitation hardening. The alloy has high strength and creep resistance at temperatures to about 1850°F (1010°C). Nimonic 115 Rolling Sheets mainly suitable to use for as gas turbine combustion chambers, afterburner parts and heattreatment furnace equipment. turbine blades in aircraft gas turbines. Nimonic 115 Clad Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 115 Flat Sheet, Nimonic Alloy 115 Plate, Nimonic 115 Rolling Plate, Nimonic 115 Flat Shim, Nimonic 115 Perforated Plate, Nimonic 115 Hot rolled Plate etc. These Nimonic 115 Cold rolled Plates and Alloy 115 Plate with 100% ultrasonic test according to EN102768-3, SA388, ASTM A520-1974, Sep 1921 C/c etc..

If you are looking for Nimonic 115 Shim feel free to contact at stindia@stindia.com for any assistance. Our support team will give you prompt response to all your queries even on holidays.

Steel Tubes India offers one of the widest ranges of Nimonic Alloy 115 sheet and Nimonic Alloy 115 plate in various qualities, sizes and grades which are equivalent to Nimonic 115 Sheet & Nimonic 115 Plate (2mm to 12mm). Nimonic 115 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 115 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 115 Sheets, thin and ultra-thin gauge Nimonic Alloy 115 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 115 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 115 Polished Plate by pickling or buff-polishing. Nimonic 115 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 115 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 115 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 115 plates based on dimensions and shape. Nimonic 115 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in India arrange complete range of Nimonic 115 plates in shortest time as well at best price, because we maintain Nimonic 115 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Nimonic 115 sheet from any other vendor or Manufacturer of mirror finish Nimonic 115 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 Nimonic 115 plate Weight Calculator

Nimonic 115 Plate Price

Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
Price in India	Indian	Rs 1200/-	$17	€14	Cut to Size
Price in Japan	Japanese	Rs 1400/-	$21	€18	Fix Length
Price in UK / Europe	European	Rs 1500/-	$22	€19	Fix Length
Price in USA	USA	Rs 1600/-	$24	€20	Fix Length

Please note: Price is subject to change without any prior notice.

Nimonic 115 plate Specification

Plate Specification	MSRR, AMS, BS, ASTM B463
Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Thickness	0.1mm to 100 mm Thk
Width	10-2500mm
AMS	AMS
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of	Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished plate
profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Clad plate: Clad plate is a composite steel plate made by bonding , etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Nimonic 115 Plate

Difference between Nimonic 115 Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Nimonic 115 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Nimonic 115 Sheet.

If thickness less than 0.15mm is then its a Nimonic 115 Foil.

Nimonic 115 Plate Properties

Nimonic 115 Plate Equivalent Grades

Alloy Name	Trade Name	UNS No.	British Specs	American Specs	German Specs	French Specs
Alloy 115	Nimonic 115		BS HR4		WS 2.4636	AFNOR NCK 15ATD

Nimonic 115 Plate chemical composition

Element	Content (%)
Nickel, Ni	54
Chromium, Cr	14.0-16.0
Cobalt, Co	13.0-15.5
Aluminum, Al	4.50-5.50
Molybdenum, Mo	3.0-5.0
Titanium, Ti	3.50-4.50
Iron, Fe	1.0
Manganese, Mn	1.0
Silicon, Si	1.0
Copper, Cu	0.20
Zirconium, Zr	0.15
Carbon, C	0.12-0.20
Sulfur, S	0.015
Boron, B	0.010-0.025

Nimonic 115 Plate physical properties

Properties	Metric	Imperial
Density	7.85 g/cm³	0.284 lb/in³
Melting point	1304°C	2380°F

Nimonic 115 Plate mechanical properties

Properties	Metric	Imperial
Tensile strength (precipitation hardened, value at room temperature)	1300 MPa	189000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%)	850 MPa	123000 psi
Elongation at break (precipitation hardened)	25.00%	25.00%

Nimonic 115 Plate Welding

Welding techniques recommended for Nimonic 115™ include gas-tungsten arc welding, gas metal-arc welding, submerged-arc welding and shielded metal-arc welding. 

Nimonic 115 plate suppliers

---

Nimonic 115 plate Stock