Monel Plate, Monel Sheet

Monel Plate supplier, Monel Polished Plate, Monel Coil Suppliers in India, Monel plate price in India, Monel strip distributor, Monel perforated sheet, Monel cold rolled plate stockist in Mumbai, Monel Plate Stockist

Monel Plate
Monel Plate
Monel Sheet
Monel Sheet
Monel Coil
Monel Coil

Monel Plate shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and it's especially suitable for reducing conditions. There are different commercial grades of Inconel Plates such as Alloy 400 Plate, Alloy 401 Plate, Alloy R-405 Plate, Alloy 450 Plate, Monel K500 Plate, Monel 404 Plate Copper-Nickel Alloy. Monel Coil is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. This sophisticated composition allows this Monel Strip to be heat treated to give higher strength and durability, alongside resistance from sub-zero temperatures right up to 480°C. Monel Flat Shim, Monel Perforated Plate, Monel Cold rolled Plate, Monel Foil & Monel Rolling Sheets can be cold formed by standards methods.

Looking for best price of Monel Clad Plate in India? We have no minimum footage requirements. We will supply the exact amount of Monel Flat Sheet you require even if it’s small quantity of Monel Rolling Plate. Contact Steel Tubes India- the right supplier of Monel Shim near you.

Steel Tubes India offers one of the widest ranges of Monel Alloy sheet and Monel Alloy plate in various qualities, sizes and grades which are equivalent to Monel Sheet & Monel Plate (2mm to 12mm). Monel Sheet is available in thicknesses ranging from .016 to .156". Large size Monel Plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Monel Sheets, thin and ultra-thin gauge Monel Alloy strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Monel Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Monel Polished Plate by pickling or buff-polishing. Monel Strips levels of finishing & cut can be adjusted according to your requirements. Monel Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Monel Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Monel plates based on dimensions and shape.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Monel plates in shortest time as well at best price, because we maintain Monel Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Monel sheet from any other vendor or Manufacturer of mirror finish Monel Plate in India.

Distributor of Monel Clad Plate, Monel Sheet, Monel Alloy Coil, Monel Strips, AMS 4544 Monel Shim exporter in India, stockist of Monel Rolling Sheets, Monel Alloy slitting coil, Monel Alloy Flat Sheet, Monel Polished Plate in Mumbai, India

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

Monel Plate Price

Monel Sheet Price List

Monel Sheet Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Monel Sheet Price in India Indian Rs 2000/- $30 €24 Cut to Size
Monel Sheet Price in Japan Japanese Rs 2800/- $40 €35 Fix Length
Monel Sheet Price in UK / Europe European Rs 3100/- $45 €39 Fix Length
Monel Sheet Price in USA USA Rs 3400/- $50 €43 Fix Length

Please note: Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Monel Shim Stock, Monel rolling sheets supplier, Monel Alloy flat sheet, Monel plate in stock, Monel Alloy rolling plate suppliers and Monel bright plate for sale, Monel Plates, Monel shim stock. Monel sheet price in India, Monel flat shim stock in India

Monel Plate Specification

Monel Sheet ASTM Specification ASTM B127ASME SB127
Monel Plate & Sheet Grades
  • Monel 400 Plate -MONEL alloy 400 (UNS N04400)
  • Monel K500 Plate - MONEL alloy K-500 (UNS N05500)
  • Monel R-405 Plate -MONEL alloy R-405 (UNS N04405)
Monel Alloy Plate Specification MSRR, AMS, BS, ASTM B127 / ASME SB127
Monel Plate Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Monel Plate Thickness 0.1mm to 100 mm Thk
Monel Plate Width 10-2500mm
Monel Sheet AMS AMS 4544
Monel Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Monel Plate Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Monel Plate Stock in form of Monel Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Monel Plate Dimensions 
High Quality Monel Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Monel Plate
Monel profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Monel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Monel Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Monel Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Monel Clad plate: Monel Clad plate is a composite steel plate made by bonding Monel plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Following steel plates are in our stock and we are providing special discount
Inconel Plate, Inconel Sheet, Incoloy Plate, Inconel 625 Plate, Inconel 718 Plate, Hastelloy Plate, Hastelloy Sheet, Monel Plate, Monel Sheet, Titanium Plate, 904l Plate, Stainless Steel Sheet, Copper Plate, Copper Nickel Plate, Nickel Plate
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of Monel Plate

Monel 2B Sheet
Monel 2B Sheet
Decorative 8K Mirror Monel Sheet
Decorative 8K Mirror Monel Sheet
Hairline Monel Sheet
Hairline Monel Sheet
No.4 Monel Sheet
No.4 Monel Sheet
Monel Plate
Monel Plate
Monel Sheet
Monel Sheet
Monel Coil
Monel Coil
Monel Clad Plate
Monel Clad Plate
Monel Strips
Monel Strips
Monel Shim Stock
Monel Shim Stock
Monel Rolling Sheets
Monel Rolling Sheets
Monel Flat Sheet
Monel Flat Sheet
Monel Rolling Plate
Monel Rolling Plate
Monel Flat Shim
Monel Flat Shim
Monel Perforated Plate
Monel Perforated Plate
Monel Polished Plate
Monel Polished Plate
Monel cold rolled sheet
Monel cold rolled sheet
Monel hot rolled plate
Monel hot rolled plate
Monel Alloy Plate
Monel Alloy Plate
Monel Alloy Sheet
Monel Alloy Sheet
Monel Quarto Plate
Monel Quarto Plate
Monel Precision Strip
Monel Precision Strip
Monel Alloy Cold Rolled Coil, Strip And Sheet
Monel Alloy Cold Rolled Coil, Strip And Sheet
Monel Alloy Hot Rolled Coil, Strip And Plate
Monel Alloy Hot Rolled Coil, Strip And Plate

Difference between Monel Sheet, Plate & Foil

Monel Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Monel Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Monel Sheet.

If thickness less than 0.15mm is then its a Monel Foil.

Monel plate related searching

Monel plates, coils, Monel Alloy plates, Monel plates price India, ASME SB127 Monel Alloy sheets Suppliers, Monel sheet, Monel Alloy sheets specification, Monel sheets exporter in India, Monel coils, Monel DIN sheets, Monel cold rolled sheet distributors, Monel alloy coil stockholder, Monel alloy shim sheets, Monel sheets price, Monel plates Exporter in India, Monel chequered plate, Monel Alloy hot rolled plates dealers in Mumbai

Client Reference and Applications

Our Monel Plate are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality Monel Sheet to our clients globally.

Aircraft Materials & Aerospace Materials Specialist

Monel Plate stockist | Monel Plate suppliers | Monel Plate manufacturer in India | Monel Plate Stock