Invar 42 Plate suppliers

Invar 42 sheet and coil supplier in Mumbai

AMS Invar 42 UNS K94100 Polished Plate, Invar Alloy 42 strip distributor in India

Invar 42 Plate
Invar 42 Plate
Invar 42 Sheet
Invar 42 Sheet
Invar 42 Coil
Invar 42 Coil

Invar 42 Plate is an austenitic alloy that contains 41% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel. UNS K94200 Invar 42 Perforated Plate is very strong, tough, ductile and possesses a useful degree of corrosion resistance. Invar 42 Hot rolled Plates maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500°F. Invar 42 Rolling Plates is also highly effective in magnetic applications. Invar 42 Coil can be hot formed, cold formed or machined easily. INVAR 36, INVAR 42, INVAR 48, and INVAR K can be hot or cold worked, machined and formed by processes similar to those used for austenitic stainless steels.

Steel Tubes India is 3rd largest supplier of Invar 42 Rolling Sheets. We stock Invar 42 Sheet, Invar 42 Shim, Invar 42 Flat Sheet and Invar 42 Flat Shim in different size & thickness. Compare our price of Invar 42 Clad Plate. We are stocking distributor of leading manufacturers of Hot rolled Invar 42 Sheet & Plate, check Invar 42 Cold rolled Plate & Sheet price list.

Steel Tubes India offers one of the widest ranges of Invar Alloy 42 sheet and Invar Alloy 42 plate in various qualities, sizes and grades which are equivalent to Invar 42 Sheet & Invar 42 Plate (2mm to 12mm). Invar 42 Sheet is available in thicknesses ranging from .016 to .156". Large size Invar 42 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Invar 42 Sheets, thin and ultra-thin gauge Invar Alloy 42 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Invar 42 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Invar 42 Polished Plate by pickling or buff-polishing. Invar 42 Strips levels of finishing & cut can be adjusted according to your requirements. Invar 42 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Invar 42 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Invar 42 plates based on dimensions and shape. Invar 42 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Invar 42 plates in shortest time as well at best price, because we maintain Invar 42 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Invar 42 sheet from any other vendor or Manufacturer of mirror finish Invar 42 plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

Invar 42 Plate Price

Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Price in India Indian Rs 2800/- $40 €34 Cut to Size
Price in Japan Japanese Rs 3600/- $53 €45 Fix Length
Price in UK / Europe European Rs 4100/- $29 €25 Fix Length
Price in USA USA Rs 4600/- $31 €26 Fix Length

Please note: Price is subject to change without any prior notice.

Invar 42 plate Specification

Invar 42 Plate Per Chem Mil-I-23011 CL 5, Chem ASTM-F-30, Chem ASTM-B-753
Thickness: 0.250"~4.000", Width: 18"~48", Length: 12"~144"

Sheets Plates
  • Hot rolled Sheet & Plate
  • Cold rolled Plate & Sheet
Sheet ASTM Specification ASTM F30
Invar Alloy 42 Plate Specification MSRR, AMS, BS, ASTM F30 / ASME SF30
Plate Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Plate Thickness 0.1mm to 100 mm Thk
Plate Width 10-2500mm
Sheet AMS AMS
Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Plate Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Plate Stock in form of Invar Alloy 42 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Plate ASTM Standard ASTM A162, GB/T2054, DIN177502002, ASTM B127, ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
High Quality Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished plate
profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Clad plate: Clad plate is a composite steel plate made by bonding plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Stock List

Alloy Product form Dimension
NILO 42 (42 Ni/57 Fe) Plate; hot rolled 6.35x2616x4140 mm, 539 kg/pc

Invar 42 Sheet Stock

Invar 42 Sheet Thickness

Invar 42 Sheet Thickness

.030”

.062”

.040"

.100”

.050”

.125”

Invar 42 Plate Stock

Invar 42 Plate Thickness

Invar 42 Plate Thickness

.150”

.875”

.187”

1.000”

.250”

1.500”

.375”

2.000”

.500”

2.500”

.625”

3.000”

.750”

4.000”

Types of Invar 42 Plate

Invar 42 2B Sheet
Invar 42 2B Sheet
Decorative 8K Mirror Invar 42 Sheet
Decorative 8K Mirror Invar 42 Sheet
Hairline Invar 42 Sheet
Hairline Invar 42 Sheet
No.4 Invar 42 Sheet
No.4 Invar 42 Sheet
Invar 42 Plate
Invar 42 Plate
Invar 42 Sheet
Invar 42 Sheet
Invar 42 Coil
Invar 42 Coil
Invar 42 Clad Plate
Invar 42 Clad Plate
Invar 42 Strips
Invar 42 Strips
Invar 42 Shim Stock
Invar 42 Shim Stock
Invar 42 Rolling Sheets
Invar 42 Rolling Sheets
Invar 42 Flat Sheet
Invar 42 Flat Sheet
Invar 42 Rolling Plate
Invar 42 Rolling Plate
Invar 42 Flat Shim
Invar 42 Flat Shim
Invar 42 Perforated Plate
Invar 42 Perforated Plate
Invar 42 Polished Plate
Invar 42 Polished Plate
Invar 42 cold rolled sheet
Invar 42 cold rolled sheet
Invar 42 hot rolled plate
Invar 42 hot rolled plate
Invar Alloy 42 Plate
Invar Alloy 42 Plate
Invar Alloy 42 Sheet
Invar Alloy 42 Sheet
Invar 42 Quarto Plate
Invar 42 Quarto Plate
Invar 42 Precision Strip
Invar 42 Precision Strip
Invar Alloy 42 Cold Rolled Coil, Strip And Sheet
Invar Alloy 42 Cold Rolled Coil, Strip And Sheet
Invar Alloy 42 Hot Rolled Coil, Strip And Plate
Invar Alloy 42 Hot Rolled Coil, Strip And Plate

Difference between Invar 42 Sheet, Plate & Foil

Invar 42 Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Invar 42 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Invar 42 Sheet.

If thickness less than 0.15mm is then its a Invar 42 Foil.

Invar 42 Plate Properties

Iron-Nickel Alloys / Nickel-Iron Alloys ASTM F30 Invar 42 Plate & Sheet Equivalent Grades

Alloy DN-Trade Name WERKSTOFF NR. UNS-No. ASTM Specification DIN Specification
Ni 42 Dilaton 41 K94100 ASTM F30
Ni 42 Dilaton 42 1.3917 DIN 17745 / SEW 385

Invar Alloy 42 Sheet & Plate Chemical Composition

Grade C Mn P S Si Ni Cr Fe
Invar 42 .50 max .40 max - .20 max - 41.0 .- Bal
Invar 42 plate suppliers

Invar 42 plate Stock