Inconel suppliers

Inconel Nickel Alloy Stockist

Find Inconel suppliers UK, USA, Singapore or Australia. We have the largest network to supply Inconel Material at best Price.

Inconel suppliers in Mumbai, India

Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys.

Looking for Inconel suppliers in USA, UK, Canada, Singapore, Australia, South Africa or Indonesia? Your single source for all type Inconel Alloys.

Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack.

Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel material is a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.

Inconel® is typically used in high temperature applications.

Looking for Alloy 600 Tube suppliers? Inconel 600 Tube?

Check Today's price of Inconel 600 Tube in India

Inconel 600 Tube supplier

       

Inconel alloy Grades

Steel Tubes India (A govt. of India Recognised Export House) is a leading stockist & supplier of Aircraft Materials, Inconel Material Grades and Inconel in India. Click on below links for Inconel Grades, Price in India.

Inconel Material suppliers

  • Inconel 600 suppliers
    Solid solution strengthened.
  • Inconel 601 suppliers
  • Inconel 625 suppliers
    Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
  • Inconel 718 suppliers
    Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
  • Inconel X750 suppliers
    Commonly used for gas turbine components, including blades, seals and rotors.
  • Inconel 907 suppliers
  • Inconel 909 suppliers
  • Inconel 706 suppliers
  • Inconel 617 suppliers
  • Inconel 751 suppliers
    Increased aluminium content for improved rupture strength in the 1600 °F range.
  • Inconel 792 suppliers
    Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
  • Inconel 939 suppliers
    Gamma prime strengthened to increase weldability.
  • Inconel 188 suppliers
    Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
  • Inconel 690 suppliers
    Low cobalt content for nuclear applications, and low resistivity.
  • Inconel 713C suppliers
    Precipitation hardenable nickel-chromium base cast alloy.
  • Inconel 230 suppliers
    Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.

Inconel density & Inconel Properties

Inconel Tensile Strength

  Physical Properties Metric English
Alloy 600 Density 8.47 g/cc 0.306 lb/in³
Alloy 625 Density 8.44 g/cc 0.305 lb/in³
Alloy 718 Density 8.19 0.296 lb/in3 (8.192 g/cm3)

Inconel Alloy 625 Density*. 8440 [kg · m-3]
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)

Inconel Electrical Conductivity

Material Conductivity Resistivity Notes
(% IACS) (Siemens/m) (Ohm-m)  

Inconel 600

1.70

9.860E+05

1.014E-06

conductivity converted from resistivity

Inconel 600

1.67

1.030E-06

conductivity converted from resistivity

Inconel 601

1.45

1.190E-06

conductivity converted from resistivity

Inconel 617

1.41

1.220E-06

conductivity converted from resistivity

Inconel 625

1.34

1.290E-06

conductivity converted from resistivity

Inconel 690

11.65

1.480E-07

conductivity converted from resistivity

Inconel 718

1.38

1.250E-06

conductivity converted from resistivity

Inconel X750

1.41

1.220E-06

conductivity converted from resistivity

Inconel Hardness

Inconel Rockwell Hardness, Inconel Strength

Material Hardness HB
Alloy 625 Bar
≤ 287 HB
Alloy 625 Sheet
145-240
Alloy 625 Tube
Seamless and Welded
-
Alloy 600 rod and bar
65-85B
Alloy 600 Plate
65-85B
Alloy 600 Sheet
88B max
Alloy 600 Tube and Pipe
88B max
Alloy 600 Wire
-
Alloy 600 Wire
-
Alloy 600 Wire
-

Inconel Heat Treatment

Heat Treatment Alloy 600 Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Heat Treatment Alloy 625 Alloy 625 has three basic heat treatments:
(1) High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster.
(2) Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster.
(3) Stress Relieve - 1650°F (899°C), air quench.
Heat Shield Inconel (2200 deg F continuous).

Inconel Low Temperature

Alloy 718 temperature ranges from cryogenic up to 1400°F
Alloy 625 temperatures ranging from cryogenic to 2000°F

Inconel Melting Point

Alloy 718 Melting Range Solution Treated: 2500-2600°F
Solution Treated and Aged: 1370-1430°C
Alloy 600 Melting Range Metric: 1354 - 1413 °C
English: 2470 - 2580 °F
Alloy 625 Melting Range 2350 - 2460°F (1280 - 1350°C)

Inconel Thermal Conductivity

Thermal Properties and Expansion

Alloy 600 Thermal Conductivity

Metric: 14.9 W/m-K
English: 103 BTU-in/hr-ft²-°F

Alloy 625 Thermal Conductivity Metric: 9.8 W/m-K
English: 68 BTU-in/hr-ft²-°F

Inconel Temperature Limits

Alloy 600 Heat Capacity

Metric: 0.444 J/g-°C
English: 0.106 BTU/lb-°F

Alloy 625 Heat Capacity Metric: 0.41 J/g-°C
English: 0.098 BTU/lb-°F

Inconel composition and uses

Inconel composition and uses are that they are 20 super alloys which have a base of chromium and austenitic nickel. This composition of Inconel alloys is exceedingly resistant to extreme temperatures and oxidation. Inconel alloys have a high resistance to corrosion in high or very low temperatures. In high temperatures, Inconel forms a solid oxide coating, which makes the surface highly resistant to corrosion. Inconel alloys are used in chemical industry, food processing industry, aerospace industry, marine engineering industry, hydraulic line tubing, heat-exchanger tubing, propulsion motors, etc.

Typical Mechanical Properties of Inconel

Inconel Machinability and Inconel Yield Strength

Material Form and Condition Tensile Strength Yield Strength Elongation % Hardness, Rockwell
ksi MPa ksi MPa
Alloy 600 rod and bar suppliers Cold drawn Annealed 80-100 550-690 25-50 170-345 55-35 65-85B
Alloy 600 Plate suppliers Hot rolled Annealed 80-100 550-725 30-50 205-345 55-35 65-85B
Alloy 600 Sheet suppliers Cold Rolled Annealed 80-100 550-690 30-45 205-310 55-35 88B max
Alloy 600 Tube and Pipe suppliers Cold Drawn Annealed 80-100 550-690 25-50 170-345 55-35 88B max
Alloy 600 Wire suppliers Cold Drawn Annealed 80-120 550-830 35-75 240-520 45-20 -
Alloy 600 Wire suppliers Cold Drawn No 1 Temper 105-135 725-930 70-105 480-725 35-15 -
Alloy 600 Wire suppliers Spring Temper 170-220 1170-1520 150-210 1035-1450 5-2 -
Alloy 625 Bar suppliers Annealed 120 827 60 414 30 ≤ 287 HB
Alloy 625 Sheet suppliers Annealed 120 827 60 414 30 145-240
Alloy 625 Tube suppliers
Seamless and Welded
Annealed 120 827 60 414 35 -

Inconel Material Weight Calculator

Click on below for Weight Calculator

Inconel UNS Number

Inconel Uses and Applications

Inconel Alloys are resistance to extreme temperatures and its ability to retain enough strength at high temperatures, it is the ideal basket material for heat treat applications.

  • Jet Engines
  • Marine applications
  • Aerospace industries
  • Sea-water applications etc.

Inconel Ultrasonic Velocity

Inconel Ultrasonic Testing

Material in/sec m/sec
INCONEL 224400 5699.76

Inconel Welding

Inconel Welding Inconel welding can be hard, as the welds that are created, tend to crack. Welding can be done using only some specific alloys which are appropriate for welding. The most widely used method for Inconel welding is known as TIG (tungsten inert gas). Even though Inconel welding, using tungsten inert gas is difficult to execute, this is one of the best ways to weld Inconel. Tungsten inert gas method of welding, provides the welder with more ability to weld, than any other welding method. There is another method for Inconel welding which is fast gaining popularity and it is known as pulsed micro laser welding.

TIP TIG inconel 800 pipe welded with inconel 82 wire on 10 inch pipe 3/4 wall.
(welded with lowest possible weld heat).

The TIP TIG weld cycle time for the inconel pipe was 40 – 50 minutes and would be reduced further if reduced Vee groove preps were utilized. The customer used to take around 4 hrs with regular TIG. When your weld process can weld a complex incoloy pipe and make the welds look simple, that’s a process that should be given consideration.

With TIP TIG, no brushing, no grinding, no spatter, no weld rework, no feeding a wire, no foot control, less skills. Note weld smoke prep machining lubricants.

 

 

Inconel Galvanic Corrosion

A galvanic series in sea water is proves that Inconel alloy 625 to be very noble com-pared to many of the other alloys. Thus, inconel alloy 625 will usually behave as a cathode when in contactwith other materials in sea water.

Inconel For Sale

Looking for a reliable supplier for Aerospace Structural Materials? Steel Tubes India is an ISO certified & Govt. recognised Export House. We provide Aerospace Manufacturing Raw Materials in UK.

ITEM BRAND SIZE
Inconel alloy suppliers Inconel 600
Inconel 601
Inconel 625
Inconel 718

Plate:3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH)

Bar:Round:Φ5.5~250mm;Square:40~240mm*40~240mm

Wire:Φ0.1mm~18mm

Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH)

Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT)

Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT)

U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT)

Flange: 3/8” ~48” (DN10 ~DN1200)

Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT)

Monel alloy suppliers Monel 400
Monel K500
Nickel 52
Nickel alloy suppliers Nickel 200
Nickel 201
Hastelloy C276
Hastelloy alloy suppliers Hastelloy C22
Hastelloy B2
Hastelloy X
Invar alloy suppliers Invar 36
Kovar alloy suppliers Kovar 29
Incoloy 800
Incoloy 800H
Incoloy alloy suppliers Incoloy 800HT
Incoloy 825

What type of alloy is Inconel?

The answer to what type of alloy is inconel?, is that this belongs to a family of super alloys that are austenitic and are comprised of nickel-chromium. There are various types of Inconel alloys such as Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel 722, Inconel 750, Inconel 800, Inconel 825, etc. Inconel alloys show an enormous resistance to corrosion and oxidation. At extreme temperatures, Inconel alloys display exceptional creep resistance and mechanical strength. Applications where tremendous surface stability is often necessary, Inconel alloys are used, as it can handle very high stress at an extremely high temperature.

FAQ: Inconel is Ferrous Or Nonferrous metal
Best Answer: Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.

Inconel Price in India

Inconel Price in India: US $10-12 per Pound

Click here for complete (products, grade & size wise)

Aircraft Body Materials & Aerospace Materials Specialist

Inconel alloys stockist in India & UK