Inconel 718 Plate Suppliers

Alloy 718 Sheet, Inconel 718 Strip Suppliers

Buy ASTM B670 UNS N07718, Inconel 718 Coil, 2.4668 Inconel 718 sheet, Alloy 718 Foil at best price in Mumbai, India

Inconel 718 Plate is supplied to AMS 5596/5597 and has a UNS designation N07718. Alloy 718 Plate is a nickel-chromium alloy has an addition of aluminum. This addition allows it to demonstrate high mechanical properties even in extremely hot environments. Inconel 718 Sheet is typically used for Jet engine & Gas turbine operations. Inconel 718 Coil is also resistant to caustic corrosion and corrosion caused by high purity water. Cutting of Inconel 718 Clad Plate & Inconel 718 Strip is often done with a waterjet cutter. Internal threads can also be cut by single point method on lathe, or by threadmilling on a machining center. Inconel 718 Shim & Inconel 718 Flat Sheet is commonly used for cryogenic storage tanks, downhole shafts and wellhead parts. Inconel Alloy 718 Plate is used in applications that require high strength such as parts for high temperature Cryogenic tanks, jet engines and high speed airframe parts such as wheels, buckets, spacers. 718 Inconel Sheet can be cold formed by standards methods.

Inconel 718 Flat Shim is designated as UNS N07718 and Werkstoff Number 2.4668. Inconel® 718 Plate is also known as Nicrofer 5219 Plate, Superimphy 718 Plate, Haynes 718 Plate, Pyromet 718 Plate, Supermet 718 Plate. and Udimet 718 Plate.

Looking for best price of 718 Inconel Plate in India? We have no minimum footage requirements. We will supply the exact amount of Inconel 718 Foil you require even if it’s small quantity of 2.4668 Inconel 718 sheet. Contact Steel Tubes India- the right supplier of Inconel UNS N07718 Plate near you.

Steel Tubes India offers one of the widest ranges of Alloy 718 sheet and Alloy 718 plate in various qualities, sizes and grades which are equivalent to Inconel 718 Sheet & Inconel 718 Plate (2mm to 12mm). Inconel 718 Sheet is available in thicknesses ranging from .016 to .156". Large size Inconel 718 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Inconel 718 Sheets, thin and ultra-thin gauge Inconel Alloy 718 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of 718 Inconel Plate in uniformly of excellent quality. We apply the process of surface finishing to our Inconel 718 Polished Plate by pickling or buff-polishing. Inconel 718 Strips levels of finishing & cut can be adjusted according to your requirements. Inconel 718 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Inconel 718 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Alloy 718 Plate based on dimensions and shape. Inconel 718 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Looking for Inconel 718 Sheet Suppliers UK? We have our dealers & distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Saudi Arabia, Malaysia, Canada, UAE, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Inconel 718 plate in shortest time as well at best price, because we maintain Inconel 718 Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed Inconel 718 sheet from any other vendor or Manufacturer of Alloy 718 Foil in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 Inconel 718 plate Weight Calculator 

Inconel 718 Plate Price Per Kg in India

Inconel 718 Sheet Price List

Inconel 718 plate price per kg in India is Rs. 3200/-, this would indicate that an approximate cost of Inconel 718 plate per kg in the United Kingdom would be 34.95 Pounds. At the same time, while considering the global or national rates of 718 Inconel Plate, it also needs to be understood that these rates are always fluctuating. It is also critical to note that in different countries, the price of Alloy 718 Plate is not always the same. For example, ASTM B670 718 Inconel plate may be available for one price in India, but the price may vary in countries like USA, China, Europe, Singapore, UK, Japan, etc.  ASTM B670 718 Alloy plate may be 20% costlier in Japan, than they are in India or they might be 30% cheaper than they are in Great Britain.

Inconel 718 Sheet Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
Inconel 718 Plate Price in India	Indian	Rs 3200/-	$46	€39	Cut to Size
Alloy 718 Plate Price in Japan	Japanese	Rs 3500/-	$51	€43	Fix Length
Inconel UNS N07718 Plate Price in UK / Europe	European	Rs 3700/-	$54	€46	Fix Length
2.4668 Inconel 718 Plate Price in USA	USA	Rs 4500/-	$65	€56	Fix Length

Inconel 718 sheet sizes & Price

12 " x 12 "	$126.03
12 " x 24 "	$165.66
12 " x 36 "	$190.04
12 " x 48 "	$217.73
24 " x 24 "	$217.73
24 " x 36 "	$287.71
24 " x 48 "	$325.38
36 " x 36 "	$356.83
36 " x 48 "	$440.29
12 " x 12 "	$135.52
12 " x 24 "	$180.66
12 " x 36 "	$208.62
12 " x 48 "	$252.23
24 " x 24 "	$252.23
24 " x 36 "	$316.84
24 " x 48 "	$388.39
36 " x 36 "	$427.86
36 " x 48 "	$531.49

Please note: Plate & Sheet Price is subject to change without any prior notice.

Click here to check complete (grade & size wise)

Inconel 718 Price per Kg

Inconel 718 plate Specification

ASTM B670 UNS N07718 Inconel 718 Sheet, Plate & Strips Related Specifications

• AMS 5596
• AMS 5597
• UNS N07718
• ASTM B670

ASTM Specification	ASTM B670 UNS N07718, ASME SB670
Alloy 718 Plate Specification	MSRR, AMS, BS, ASTM B670 / ASME SB670, AMS 5596 AMS 5597 PWA 1033 GE B50TF15 ASTM B670 ASTM B637
Inconel 718 Plate Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Inconel 718 Plate Thickness	0.1mm to 100 mm Thk
Inconel 718 Plate Width	10-2500mm
Inconel 718 Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Inconel 718 Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
ASTM B670 Inconel 718 Stock in form of	ASME SB670 Inconel Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Inconel 718 Plate ASTM Standard	ASTM A162, GB/T2054, DIN177502002, ASTM B127, ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
High Quality Inconel 718 Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Inconel 718 plate
Inconel 718 profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Inconel 718 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width Inconel 718 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Inconel 718 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Inconel 718 Clad plate: Inconel 718 Clad plate is a composite steel plate made by bonding Inconel 718 plate, etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Inconel 718 Sheet Thickness & AMS Nos.

The thing about Inconel 718 sheet thickness & AMS nos., is that ASTM B670 Alloy 718 sheet thickness varies and it can also be tailor made to meet the specific needs of clients. The AMS nos., of ASTM B670 718 Alloy sheet are AMS 5596. The Chemical Composition of ASTM B670 Gr.718 Plate is Chromium 17-21, Carbon 0.08 max, Titanium 0.65-1.15, Phosphorus 0.015 max, Sulfur 0.015 max, Silicon 0.35 max, Manganese 0.35 max, Tantalum 0.05 max, Molybdenum 2.80-3.30, Columbium 4.75-5.50, Copper 0.30 max, Aluminum 0.20-0.80, Cobalt 1.00 max, Boron 0.006 max, Nickel 50-55 and Iron balance.

Inconel 718 Sheet AMS Nos
AMS 5596 Sheet, Strip and Plate	AMS 5597 Sheet, Strip and Plate
AMS 5914 Sheet, Strip and Foil	AMS 5950 (718SPF) Sheet & Strip

Inconel 718 Sheet Stock

Inconel Alloy 718 AMS 5596, AMS 5597 Stock List

Alloy	Product form	Dimension
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, solution treated	0.5x914x3048, 12.47 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, solution treated	0.8x914x3048, 19.05 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, solution treated	1.0x1219x3000, 28.7 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, annealed	1.6x914x3048, 37 kg/pc
INCONEL 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, annealed, pickled	1.65x1220x3040, 51 kg/pc
INCONEL 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, pickled, annealed	2.08x914x3048, 48.5 kg/pc
ALLOY 718	Sheet, Plate; cold rolled, pickled, annealed	2.54x914x3048, 60.4 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, pickled, sol. annealed	3.17x1219x3048, 99.3 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Sheet, Plate; cold rolled, annealed	3.71x914x3048, 85.8 kg/pc
ALLOY 718 (53 Ni/19 Cr/5 Nb)	Plate; cold rolled, solution treated	12.7x1219x500, 68.5 kg/pc

Difference between Inconel 718 Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a Inconel 718 Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 718 Sheet.

If thickness less than 0.15mm is then its a Inconel 718 Foil.

Inconel 718 Plate Properties

Specific Gravity: 7.98 g/cm3

Typical Applications of Inconel 718 Plate, Sheet & Coil

• Exhausts
• Liquid rocket components involving cryogenic temperatures

Inconel 718 Plate, Sheet & Coil Chemical Composition

	Ni	Cr	Fe	Mo	Nb+Ta	C	Mn	Si	Ph	S	Ti	Cu	B	Al	Co
Min	50	17	Bal	2.8	4.75	-	-	-	-	-	0.65	-	-	0.20	-
Max	55	21	-	3.3	5.50	0.08	0.035	0.35	0.015	0.015	1.15	0.30	0.006	0.80	1.00

Alloy 718 Sheets, Plates & Coils Mechanical Properties

Mechanical Properties in the annealed condition

	0.2% Proof Stress	Tensile Strength	Elongation
	MPA	MPA	%
	Max	Max	Min
Sheet and strip	550	965	30
Plate	725	1035	30

Mechanical Properties in the solution treated and precipitation heat treated condition

0.2% Proof Stress	Tensile Strength	Elongation
MPA	MPA	%
Min	Min	Min
1035	1240	12

Equivalent Grades for 718 Inconel Sheets & Plates

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 718	2.4668	N07718	–	–	–	–	–

Inconel 718 Sheet Sizes

Sizes in Inches	Sizes in mm
.125"	3.18
.134"	3.40
.156"	3.96
.187"	4.75
.250"	6.35
.312"	7.92
.375"	9.53
.500"	12.7
.625"	15.9
.750"	19.1
.875"	22.2
1"	25.4
1.125"	28.6
1.250"	31.8
1.500"	38.1
1.750"	44.5
2"	50.8
2.500"	63.5
3"	76.2

Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Imperial Dimensions

Surface finish	Gauge (in)	Width (in)
2B – Cold rolled, heat treated, pickled, skin passed	10–24	max. 72*
2D – Cold rolled, heat treated, pickled	12–24	max. 60
BA Mexinox only	18–28	max. 48
Polished (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

An estimated delivery time location wise for Inconel Alloy 718 Plate

Country	Days	Country	Days
USA	45	Canada	45
Australia	30	UK	35
Malaysia	15	Poland	15
Iran	7	Singapore	14
Vietnam	20	Albania	20
UAE	15	Thailand	20
Nigeria	40	Ethiopia	40
Turkey	30	Tanzania	30
Bahrain	15	Kenya	40
Libya	40	Syria	40
Zambia	40	Egypt	40
Italy	40	India	7
Saudi Arabia	15	Qatar	15
Namibia	40	Indonesia	20
South Africa	40	Australia	40
Uganda	40	Angola	40
Kazakhstan	20	Algeria	20

Find here largest Inconel 718 Plate Stock, Inconel 718 Sheet Suppliers in Mumbai, India

---

Inconel 718 Plate Suppliers UK & India