Difference Between Inconel 800 and Incoloy 800

Incoloy 800 also known as Inconel 800 which is nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. The nickel content makes Incoloy800 highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.

Incoloy 800 is mainly in demand by applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres.

Incoloy 800

Inconel 800, Incoloy 800

AMS 5871, ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, DIN 17460, EN 10028-7, EN 10095

Stock Size: Thickness: 0.025"~3.00"

Width & Length: 36" X 120" or 48" X 144"

Inconel 800, Incoloy 800 Tubing

Standards: ASTM-B-163, ASTM-B-407, ASTM-B-514, ASTM B829, ASTM-B-775, ASTM-B-515, ASTM-B-751, BS3 3074NA15, ISO 6207, DIN 17459

Stock Size: OD 1/16"~3", Wall: 0.010"~0.250", Length: 17'/24' FT R/L

3/8" OD x 0.049" Wall x 20 FT

1/4" OD x 0.049" Wall x 20 FT

Inconel 800, Incoloy 800 Pipe

Standards:ASTM-B-514, ASTM B829, ASTM B775, ASTM B515, ASTM B751, BS3 3074NA15, ISO 6207, DIN 17459

Stock Size: 1/4" sch 10 to 16" sch 80

Inconel 800, Incoloy 800 Bar

Standards: AMS 5766, ASTM-B-408, ASME-B-408, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095

Stock Size: 1/4" Diameter to 3" Diameter

In what forms is Incoloy® 800H/HT available at Steel Tube India?

Sheet
Plate
Bar
Pipe & Tube (welded & seamless)
Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
Wire

What are the characteristics of Incoloy 800H/HT?

High temperature strength
High creep rupture strength
Resistant to oxidation and carburization in high temperature environments
Good corrosion resistance in many acidic environments
Good resistance to many sulfur-containing atmospheres

Alloy 800 (UNS N08800) Chemical Composition, %

Ni	Cr	Fe	C	Al	Ti	Al+Ti
30.0-35.0	19.0-23.0	39.5 min	.10 max	.15-.60	.15-.60	.30-1.20

Alloy 800H (UNS N08810) Chemical Composition, %

Ni	Cr	Fe	C	Al	Ti	Al+Ti
30.0-35.0	19.0-23.0	39.5 min	.05-.10	.15-.60	.15-.60	.30-1.20

Alloy 800HT (UNS N08811) Chemical Composition, %

Ni	Cr	Fe	C	Al	Ti	Al+Ti
30.0-35.0	19.0-23.0	39.5 min	.06-.10	.25-.60	.25-.60	0.85-1.2

*Note that the chemical composition of Incoloy 800HT will always be within the limits of Incoloy 800H.

*Note the limits of Incoloy 800H may or may not be within the limits of Incoloy 800HT.

In what applications is Incoloy 800H/HT used?

Ethylene furnace quench boilers
Hydrocarbon cracking
Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
Industrial furnaces
Heat-treating equipment
Chemical and petrochemical processing
Super-heater and re-heaters in power plants
Pressure vessels
Heat exchangers

ASTM Specifications

Alloy	Pipe Smls	Pipe Welded	Tube Smls	Tube Welded	Sheet/Plate	Bar	Forging	Fitting
Alloy 800 (UNS N08800)	B407	B154	B163	B515	B409	B408	B564	B366
Alloy 800H (UNS N08810)	B407	B154	B163	B515	B409	B408	B564	B366
Alloy 800HT (UNS N08811)	B407	B154	B163	B515	B409	B408	B564	B366