ASTM B348 Round Bar

Manufacturer, Supplier and Exporter of Titanium ASTM B348 Round Bar, ASTM B348 Hex Bar, ASTM B348 Titanium Rounds, ASTM B348 Rod

Distributor of ASME SB348 Black bars, ASTM B348 Forged Bar, ASTM B348 Bright Bar, ASTM B348 Flat Bar, ASTM B348 Shaft, ASTM B348 Threaded Bar Stockist. Check ASTM B348 Square bar Price in India

ASTM B348 - 13

ASTM B348 is a Standard Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B348 specification covers annealed bars and grills made from titanium or its alloys. ASTM B348 material grades covered should conform to the required chemical composition requirements. Elements that are intentionally added to the melt should be identified, analyzed and reported in the chemical analysis. Specimens for tension tests should be machined and the tensile properties determined using a specified strain rate through the yield strength and at an increasing rate. Each annealed material may be furnished as either descaled, sandblasted, ground, or rough turned.

reference: https://www.astm.org/

Looking to buy Alloy 600 Round Bar? Inconel 600 Round Bar?

Check Today's price of Inconel 600 Round Bar in India

Inconel 600 Round Bar supplier

       

1. Scope

1.1 ASTM B348 specification covers annealed titanium and titanium alloy bars and billets as follows:

1.1.1 ASTM B348 Grade 1—UNS R50250. Unalloyed titanium,

1.1.2 ASTM B348 Grade 2—UNS R50400. Unalloyed titanium,

1.1.2.1 ASTM B348 Grade 2H—UNS R50400. Unalloyed titanium (ASTM B348 Grade 2 with 58 ksi (400 MPa) minimum UTS),

1.1.3 ASTM B348 Grade 3—UNS R50550. Unalloyed titanium,

1.1.4 ASTM B348 Grade 4—UNS R50700. Unalloyed titanium,

1.1.5 ASTM B348 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.6 ASTM B348 Grade 6—UNS R54520. Titanium alloy (5 % aluminum, 2.5 % tin),

1.1.7 ASTM B348 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.7.1 ASTM B348 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (ASTM B348 Grade 7 with 58 ksi (400 MPa) minimum UTS),

1.1.8 ASTM B348 Grade 9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.9 ASTM B348 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.10 ASTM B348 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.11 ASTM B348 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.12 ASTM B348 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.13 ASTM B348 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.14 ASTM B348 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.14.1 ASTM B348 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladiumm (ASTM B348 Grade 16 with 58 (400 MPa) ksi minimum UTS),

1.1.15 ASTM B348 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.16 ASTM B348 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.17 ASTM B348 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.18 ASTM B348 Grade 20—UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 %–0.08 % palladium,

1.1.19 ASTM B348 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),

1.1.20 ASTM B348 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),

1.1.21 ASTM B348 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,

1.1.22 ASTM B348 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,

1.1.23 ASTM B348 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.23.1 ASTM B348 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (ASTM B348 Grade 26 with 58 ksi (400 MPa) minimum UTS),

1.1.24 ASTM B348 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.25 ASTM B348 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08–0.14 % ruthenium),

1.1.26 ASTM B348 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 to 0.14 % ruthenium),

1.1.27 ASTM B348 Grade 30—UNS R53530. Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.28 ASTM B348 Grade 31—UNS R53532. Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.29 ASTM B348 Grade 32—UNS R55111. Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),

1.1.30 ASTM B348 Grade 33—UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.31 ASTM B348 Grade 34—UNS R53445. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.32 ASTM B348 Grade 35—UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.33 ASTM B348 Grade 36—UNS R58450. Titanium alloy (45 % niobium),

1.1.34 ASTM B348 Grade 37—UNS R52815. Titanium alloy (1.5 % aluminum), and

1.1.35 ASTM B348 Grade 38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

Note 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Related searching:

ASTM B348, ASTM B348 PDF, ASTM B348 Grade 23, ASTM B348-13 GRADE 5, ASTM B348 GRADE 2 PROPERTIES, ASTM B348 - 13 PDF, ASTM B348 Grade 1, ASTM B348-10, ASTM B348-11, ASTM B348 GR 2 PROPERTIES, ASTM B348 GRADE 4, ASTM B348 GRADE 2, ASTM B348 BAIDU, ASTM B348 CHEMICAL COMPOSITION, ASTM B348 F2, ASTM B348 GR F2, ASTM B348 F67, ASTM B348 GRADE 7, ASTM B348 GRADE 3, ASTM B348 GR 1, ASTM B348 GRADE 2 HARDNESS, ASTM B348 STANDARD, ASTM B348 SPEC, ASTM B348 Titanium, ASTM B348 TOLERANCES, ASTM B348 TI GR 5, TITANIUM ASTM B348 GR 5, TITANIUM ASTM B348 GR 2, TITANIO ASTM B348, TITANIO ASTM B348 GR 2, TI6AL4V ASTM B348, ASTM B348 Titanium GR 5, TA6V ASTM B348, ASTM B348-06A, ASTM B348-09, ASTM B348-05, ASTM B348-00, ASTM B348-08A, ASTM B348-03, ASTM B348-13, ASTM B348 GRADE 19, GRADE 2 ASTM B348, ASTM B348 GR 3, ASTM B348 GRADE 5, TITANIO ASTM B348 GR 5, TITANIUM GRADE 5 ASTM B348, ASTM B348-99, ASTM B348-95, ASTM B348 Alpha And Near Alpha Titanium Alloys - ASTM B348 Alpha Titanium Alloys - ASTM B348 Alpha-Beta Titanium Alloys - ASTM B348 Annealing - Bars And Rods - ASTM B348 Beta Titanium Alloys - ASTM B348 Billets - Titanium - ASTM B348 Titanium Alloy Bars - ASTM B348 Titanium Alloy Billets

Forms available of ASTM B348 Bars:

ASTM B348 Bar ASME SB348 Rod
ASTM B348 Square Bar ASTM B348 Black bars
ASTM B348 Threaded Bar ASTM B348 Rectangular Bar
ASTM B348 Bright Bar ASTM B348 Rounds
ASTM B348 Billet ASME SB348 Unpolished Round Bar
ASTM B348 Cold Finish Bar Round Bar ASTM B348 Half Round Bar
ASTM B348 Cold Finished Round Bar ASTM B348 Hot Rolled Round Bar
ASTM B348 Cold Drawn Round Bar ASTM B348 Cold Rolled Round Bar
ASTM B348 Square Round Bar ASTM B348 36" Round Bar
ASTM B348 Cold Drawn Round Bar Mill Finish ASTM B348 Round Bar
ASTM B348 Round Rods ASTM B348 Hex Bar
ASTM B348 Flat Bar ASTM B348 Rod Bar
ASTM B348 Ingot supplier ASME SB348 Hollow Bar
ASTM B348 Shaft Bar ASTM B348 Rectangle Bar
ASTM B348 Hollow Round Bar ASTM B348 Forged Bar
ASTM B348 Extruded Round Bar ASTM B348 3 Ft Round Bar
ASTM B348 Polished Round Bar ASME SB348 6 Ft Round Bar
ASTM B348 Block ASME SB348 Rods

 

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist