310H Stainless Steel Pipe supplier
SA213 TP310H, SS 310H Tubing manufacturer in India
Buy ASTM A249 TP 310H SS Seamless Pipes, ASTM A312 SS TP 310H Round Pipes, SS TP 310H Polished Pipes, SS UNS S31009 Square Pipes

SA213 TP310H

310H Stainless Steel Pipe

Stainless Steel 310H Tubing
SA213 TP310H has carbon content and is a preferred choice for high temperature applications. Stainless Steel 310S Tubing is an austenitic stainless steel often used in sulfur bearing gas atmospheres, heat exchanger and recuperator tubing and molten salt applications. Stainless Steel 310S Seamless Tubing (UNS S31009) has a carbon content restricted to exclude the lower end of the 310 range. 310H Stainless Steel Pipe has good resistance to oxidation in intermittent service in air at temperatures up to 1040°C and 1150°C in continuous service. it is recommended that SS 310S Tube should not be continuously used at 425-860°C (797-1580°F) range due to carbide precipitation.
We offer various sizes of ASTM A249 TP 310H SS Seamless Pipes up to the biggest 4 inches in diameter in 20 feet long. SS 310S welded round tubes are available in bright polished finish. We supply ASTM A312 SS TP 310H Round Pipes up to the biggest 4 inches in wall opening in 20 feet long. SS 310S welded square tubes are available in both bright polished and hairline finish. We also stock SS TP 310H Polished Pipes up to the biggest 4 inches in wall opening in 20 feet long. SS ASTM A269 310H SS Pipes are available in both bright polished and hairline finish.
Steel Tubes India in renowned Manufacturer of Stainless Steel 310H Welded Tubes in India. We manufacture of all types on SS UNS S31009 Square Pipes. We have supplied ASTM A312 SS TP 310H Seamless Pipes to Gasco, SS TP310H Rectangular Welded Pipes to Saudi Aramco, SS 310S Gas Tube to Oman, TP 310H SS ERW Pipes to KNPC, Stainless Steel 310S Seamless Pressure Tubing to Qatar Gas, TP310H Stainless Steel EFW Tubing to Dubai, ASTM A249 TP 310S Stainless Steel High Pressure Tube to leading oil & gas company in Iraq, Stainless Steel 310S u tube to South Africa, Stainless Steel 310S Coiled Tubing to North America, SS 310S U bend Tubes to United Kingdom and Stainless Steel 310S Oval Tube to UAE. We have more than 14 years of experience in supplying 310S Stainless Steel Seamless Tubes & Stainless Steel 310S Instrumentation Tubes. Our highly experienced team can help you to buy right SS 310S Cold Rolled Coiled Tubing.
If you are looking to buy High quality assured Stainless Steel 310H capillary tube, Stainless Steel 310H Square Tubing or Stainless Steel 310H Polished Tube at best price in India, send an email to stindia@stindia.com, we will send you the Free Quote & recent price of Stainless Steel 310H precision tubes, Stainless Steel 310H Welded Tube, Stainless Steel 310H instrumentation tubes, Stainless Steel 310H Oval Tube along with inspection & delivery schedule. Steel Tubes India is a Govt. of India recognised Exporter of Stainless Steel 310H Mirror Tube in India and shipping to Europe, Trinidad & Tobago, Singapore, Qatar, Ethiopia, United Arab Emirates, Oman, Malaysia, Kuwait, Canada, Australia, United States, New Zealand, United Kingdom, St. Helena, South Africa, India, Nigeria, Ghana, Hong Kong, Saudi Arabia, Philippines, Ireland, Pakistan, South Korea, Iraq, Norway, Finland, Egypt, Netherlands, Denmark, Iran, Kenya, Sweden, Thailand, Indonesia, India, Belgium, Taiwan, Greece & Germany since 2002. SS 310H Needle Tube, SS 310H Round Tube and Stainless Steel 310H hydraulic tube are available in different sizes, diameter & wall thickness.
Table of contents
- SA213 TP310H Tube Price
- Stainless Steel 310H Tube Specification
- SS 310H Tubing Tolerances
- Stainless Steel 310H Tube Stock
- Stainless Steel 310H tube properties
- Stainless Steel 310H Tube Sizes
- SS UNS S31009 Tube Weight
- ASTM A312 SS TP 310H Round Pipes Pressure Rating
- Difference Between Inconel and Stainless Steel
- 310H Stainless steel tube dimensions
Looking to buy 304 Stainless Steel Tube? 304 Stainless Steel Tubing?
Check Today's price of 304 Stainless Steel Tube in India

SA213 TP310H Price
Price of SS 310H Seamless Tube ASTM A312 TP 310H: $10000 ~ $ 11500 USD/Ton
Price of SS 310H ERW/Welded Tube ASTM A312 TP 310H: $9000 ~ $ 10500 USD/Ton
Price of SS 310H EFW Tube ASTM A358 TP 310H: $ 8800 ~ $ 10000 USD/Ton
Stainless Steel 310H Tube Specification
Stainless Steel 310H Tube Standards | ASTM A213, ASTM A249, ASTM A269, ASME SA213, ASME SA249, ASME SA269, EN 10216-5 TC1 / TC2, PED 97/23/EC, AD 2000, NACE MR0175/ISO 15156 |
---|---|
Stainless Steel 310H Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
Stainless Steel 310H Welded Tube Size | 6.35 mm OD To 152 mm OD |
Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Stainless Steel 310H tubing wall thickness | 0.020" –0.220", (special wall thicknesses available) |
SS 310H tube Length | Single Random, Double Random, Standard & Cut length |
310H Stainless Steel Tube Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Stainless Steel 310H tube Form | Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc. |
Stainless Steel 310H Tube Type | Seamless, ERW, EFW, Welded, Fabricated |
Electropolished | (EP) Electropolished for Ultra High Purity Systems |
Non-Electropolished | (BA) Bright Annealed or (AP) Annealed & Pickled for High-Purity, (CFOS) Cleaned for Oxygen Grade Service or Corrosive Systems |
I.D. Surface Finish Options | 5, 7 & 10 µin. Ra |
JIS | 8A to 250A |
Tolerances | In accordance with: ASTM: A269 & A632, JIS: G 3459 |
310H stainless steel tubing End | Plain End, Beveled End, Treaded, Ends are suitable for orbital welding |
Marking | All 310H Stainless Steel tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
310H stainless steel tubing Application | Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger |
Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
Specialize in | Stainless Steel 310H Capillary Tube & Other Odd Size Stainless Steel 310H Heat Exchanger & Condenser Tubes Stainless Steel 310H Hydraulic tubing with OD up to 50.8 mm (2.0 in.) are delivered in bright annealed condition Stainless Steel 310H hydraulic tube with OD larger than 50.8 mm are supplied in the annealed and pickled condition, Or in polished condition |
Marking & Traceability | Each Stainless Steel 310H Tubing is traceable to its producing mill and heat by an identification number etched within 24" (610mm) of one end. |
310H stainless steel tubing Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
310H stainless steel tubing Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
We can also cut, thread, and groove Stainless Steel 310H Tubes to meet your specifications |
310h Stainless Steel Tubing Applications
310H stainless steel tubing applications are many and they include applications and industries such as oven linings, feeding and discharging systems, burner parts, catalytic recovery systems, coal combustors, containers for sulfur dioxide, ammonia and hot concentrated acids, retort linings, conveyor belts, coal gasifier internals, tube hangers, baskets, refractory supports, trays, fans, smelter and steel melting equipment, etc. The Creep Strength of 310H stainless steel is 20.0 MPa (2900 psi). 310H stainless steel has a Poissons Ratio of 0.30. The Magnetic Permeability of 310H stainless steel is 1.02. The Linear CTE of 310H stainless steel is 15.9 µm/m-°C (8.83 µin/in-°F).
Ss 310h Tubes Dimensions
310H stainless steel is an austenitic stainless steel. SS 310H tubes dimensions vary and they are mainly based on the need of the client. SS 310H has a Modulus of Elasticity of 200 GPa (29000 ksi). The Electrical Resistivity of SS 310H is 0.0000780 ohm-cm. The Chemical Composition of SS 310H is Iron, Fe 45.865 - 49.075%, Nickel, Ni 19 - 22 %, Carbon, C 0.040 - 0.10%, Silicon, Si 0.75%, Manganese, Mn 2.0%, Chromium, Cr 24 - 26%, Sulfur, S 0.030% and Phosphorous, P 0.045%. The Thermal Conductivity of SS 310H is 95.8 BTU-in/hr-ft²-°F (13.8 W/m-K).
310h Stainless Steel Tube Density
The UNS number of 310H stainless steel is UNS S31009. 310H stainless steel tube density is 7.89 g/cm3 (0.285 Ibs/in3). 310H stainless steel has a Rupture Strength of 20.0 MPa (2900 psi). The Shear Modulus of 310H stainless steel is 77.0 GPa (11200 ksi). 310H stainless steel has a Specific Heat Capacity of 0.120 BTU/lb-°F (0.502 J/g-°C). 310H stainless steel has superb resistance to oxidation. In mildly cyclic conditions, 310H stainless steel can resist oxidation up to 1100 °C (2010 °F). 310H stainless steel has excellent creep deformation resistance. Because it has carbon content, 310H stainless steel is used in high temperature applications.
Stainless Steel 310H Tube Wall Thickness
028 | = | .028" Thick |
035 | = | .035" Thick |
039 | = | .039" Thick |
049 | = | .049" Thick |
065 | = | .065" Thick |
083 | = | .083" Thick |
109 | = | .109" Thick |
SS 310H Tubing Tolerances
The Stainless Steel 310H tubes outer diameter (OD) are according to ASTM A269/A213. Stainless Steel 310H Tubing Tolerance specifications are as per below:
Stainless Steel 310H Tube OD | Stainless Steel 310H Tube Tolerance |
---|---|
4mm to 35mm | +/- 0.08mm |
35mm to 38mm | +/- 0.15mm |
38mm to 60mm | +/- 0.20mm |
60mm and above | +/- 0.25mm |
We stock following types of Stainless Steel 310H Tube

SA312 TP310H Coiled Tubing

AISI 310H Capillary Tube

ASTM A312 TP310H ‘U’ Shaped tubing

ASTM A213 TP310H Seamless Pipe supplier

ASTM A269 TP310H seamless tubing

ASTM A249 TP310H Thin Wall tube

ASTM A358 TP310H Furnace Tube

ASME SA213 TP310H Gas Tube

ASTM A312 gr TP Heat Exchanger Tubes

SA213 TP 310H boiler tube

S31009 Stainless Steel welded tubing

Jis 310H Stainless Steel Square Tubing

SS 310H Hollow Section

Stainless Steel 310H Rectangle Tube

Stainless Steel 310H Grade tubing
Types of Stainless Steel 310H Seamless & Welded Tubes
SS 310H Seamless Pipes | 310H SS Round Pipes |
Type 310H Stainless Steel Welded Pipes | SS 310H Seamless Tubing |
JIS SUS310H Coiled Tubing | 310H Stainless Steel Capillary Tubing |
S31009 Stainless Steel Aerospace tubes | Stainless Steel 310H High Pressure Tube |
Stainless Steel 310H Sighting Tube | ASTM A249 TP310H Polish Pipe |
Type 310H Stainless Steel Elliptical and Oval Tubes | S31009 Stainless Steel Rectangular Tube |
Stainless Steel 310H Condenser Tube | ASTM A358 TP310H Aero engine tubes |
SS 310H straight tube boiler | S31009 Stainless Steel furnace tube |
JIS SUS310H Mirror Tube | SS 310H Rectangular Tube supplier |
UNS S31009 Pitot Tube | 310H Stainless Steel Round Tube |
Jis 310H Polished Tubing | SS 310H Ornamental Tube |
UNS S31009 Perforated Tube | WERKSTOFF NR. Flexible Tube |
Stainless Steel 310H Finned Tube | SS 310H Dom Tube supplier |
ASTM A249 TP 310H Perforated Exhaust Tube | WERKSTOFF NR. Rhs Tube |
SS 310H Corrugated Tube | AISI 310H Honed Tube |
Jis 310H Stainless Steel Slotted Handrail Tube | SS 310H Thin Wall Tube |
ASTM A249 TP 310H Thick Wall Tube | ASTM A249 TP310H Threaded Pipe |
ASTM A249 TP 310H U Shaped Tube | 310H Stainless Steel Square Tube Mirror Finish |
SS 2332 Sweden Stainless Steel Vacuum Tube | WERKSTOFF NR. Coaxial Tube |
Ultra-High Purity Electropolished Stainless Steel 310H Tube | Thin Wall Stainless Steel 310H Pipe |
Jis 310H Stainless Steel Annealed Tubing | ASME SA213 TP310H Coil Tubing Heat Exchanger |
310H Stainless Steel Thin Wall Tubing | 310H Stainless Steel Metric Tubing |
ASTM A269 TP310H Seamless Square Tubing | Large Diameter 310H Stainless Steel Tube |
ASTM A213 TP310H Woven Mesh Tube | ASTM A269 TP310H Instrumentation Tubing |
SA213 TP 310H Instrument Tubing | 310H Stainless Steel Square Tubing |
Stainless Steel 310H Coil Tubing | SA312 TP310H Boiler Tube |
Stainless Steel 310H Tube Properties
310H Stainless Steel mechanical properties & chemical composition
310H Stainless Steel Tube Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
310H | min. | 0.04 | – | – | – | – | 24.0 | – | 19.0 | – |
max. | 0.10 | 2.0 | 1.0 | 0.045 | 0.030 | 26.0 | 21.0 | – |
Stainless Steel 310H Tubes Mechanical Properties
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
310H | 515 | 205 | 40 | 95 | 217 |
Equivalent Grades for 310H Stainless Steel Tubes
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
310H | S31009 | – | X5CrNi18-10 | 2332 | SUS 310H |
Types | Out diameter | Sizes | Length |
---|---|---|---|
NB Sizes (in stock) | .0035” ~ 8” | 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" | Cut to length |
Stainless Steel 310H Seamless Tube (Custom Sizes) | 6.35 mm OD To 101.6 mm OD | As per requirement | Cut to length |
Stainless Steel 310H Welded Tube (ERW Tube) (in Stock + Custom Sizes) | 6.35 mm OD To 152 mm OD | As per requirement | Cut to length |
Stainless Steel 310H Seamless Tubes Surface Finish
Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
Roughness Average(RA) | Roughness Average(RA) | ||||
μ inch | μm | μ inch | μm | ||
AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
Stainless Steel 310H Tube Sizes
1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500" O.D.) | |
SCH 5, 10, 40, 80, 160, XXH |