ASTM F468 Bolts

Manufacturer, Supplier and Exporter of ASTM F468 Bolts, ASTM F468 Anchor Bolt, ASTM F468 Flange Bolt, ASTM F468 Tap Bolt, ASTM F468 Lag Bolt

ASTM F468 Hex Head Bolts, ASTM F468M Screws, F468 Hexagon Head Screw, ASTM F468M Bolts, ASTM F468 Socket Head Cap Screws, ASTM F468M Threaded Rods, ASTM F468 Heavy Hex Bolts Supplier in India. Check ASTM F468 Bolts Price in India

ASTM F468 - 16

ASTM F468 is a Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

An ASTM designation number identifies a unique version of an ASTM standard.

F468 - 16

F = materials for specific applications;

468 = assigned sequential number

16 = year of original adoption (or, in the case of revision, the year of last revision)

ASTM F468-16, Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use. ASTM F468 specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs manufactured from a number of alloys in common use and intended for general service applications. The bolts, cap screws, and studs shall be manufactured from material having a chemical composition conforming to the requirements specified. The fasteners shall be cold formed, hot formed, or machined from suitable material. Different tests shall be conducted in order to determine the following mechanical properties of fasteners: hardness, tensile strength, yield strength, and elongation. ASTM F468 fasteners shall be cold formed, hot formed, or machined from suitable material.

ASTM F468 bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. ASTM F468 Hex Bolts and ASTM F468 Hex Head Bolts is some of the toughest fasteners. These ASME SF468 sturdy fasteners are used to connect heavy materials.

Steel Tubes India is a leading manufacturer & stockist of ASTM F468 Long Bolts and ASME SF468 12 Point Bolts in India. Bolts are externally threaded fasteners used in industrial and construction applications for assembling two unthreaded products together and available in hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. We are manufacturer & supplier of ASTM F468 studs such as All-Thread, Tap-End, Double-End Studs, and Combination Studs, different types of nuts such as Hex Nuts, Heavy Hex Nuts, Overtapped Nuts, Tommy Hole Nuts, Spherical-Faced Nuts and Full Threaded Rods, full thread rods, bonnet bolts, Carriage Bolt in a variety of finishes and sizes from 1/2" to 3 1/2". In the petroleum and chemical industry the fully threaded stud is the most common ASTM F468 Bolt used for flanged connections. ASTM F468 Stud bolts are available in all thread pitches (UNC/UNRC – UNF/UNRF – 8UN) diameters and metric sizes. Steel Tubes India has the capability to thread and manufacture specials from round bar to the customers drawings.

ASTM F468 Hex Cap Screws- also known as machine bolts or hex bolts are available in various bolt grade markings and strengths. Our ASTM F468 Nut Bolts Hex Bolts, Tab Bolts, Flange Bolts, Carriage Bolts, Shoulder Bolts and T Head Bolts are used to attach machine threaded fasteners when joining materials together.

Many of the ASTM F468 Flange Bolts We produce for more critical high specification Superalloys in our Mumbai Factory. We also manufacture a wide range of the non-favoured thread forms such as BSW BSF UNC & UNF, we are finding the biggest call is now for Metric Hexagon Bolts that are modified versions of existing international standards or indeed custom bespoke bolting manufactured to Customer or OEM Drawings.

Is your requirement for a small ASTM F468 fastener or large machined fastener? We will manufacture to your specifications and requirements. These Bolts can range in inch sizes from 1/4-20 through 1-8 (coarse thread) and 1/4-28 through 1-14 (fine thread). Bolts can range in metric sizes from M6-1.0 through M24-3 (coarse thread) and M6-0.75 through M24-1.5 (fine thread).

Looking to buy Inconel 718 Bolts? Inconel 718 Stud Bolt?

Check Today's price of Inconel 718 Bolts in India

 Inconel Price List  Hastelloy Price per kg  Monel Prices   Nickel Prices    SS Price   Weight Calculator

ASTM F468 Specification

ASTM F468 Bolt Type	ASTM F468 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch	#0000 -3" (customized sizes available)
Metric	M1.6 - M48
Length	Customized Length
Grade	Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material	Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel, 718 Bolts, Hastelloy, Monel), Titanium, Exotic Metals, Other
Method	Cold forming, Hot Forging, Wire Forming
Fastener Standards	ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses	Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods	ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters	M6 to M36
Certification	Dual Certified As per ASTM & ASME Codes

Manufacturer of ASTM F468 Hexagon Head Cap Bolts in Mumbai, India. ASTM F468M Bolts, ASTM F468M Nonferrous Bolts, ASTM F468 Hex Bolts, ASTM F468 Hex Cap Screws, ASTM F468 Studs Exporter in India

1. Scope

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. and socket head cap screws (including socket head cap, button head and flat countersunk head configurations) with nominal thread 0.06 (size 0) through 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.

1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F467.

1.2.1 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

NOTE 1: A complete metric companion to Specification F468 has been developed—F468M; therefore no metric equivalents are presented in this specification.

ASTM F468 Bolts Chemical Properties

Copper and Copper Base Alloys

Alloy	General Name	Aluminum	Copper, min	Iron, max	Manganese, max.
260	Brass		68.5 -71.5	0.05
464	Naval Brass		59.0 – 62.0	0.10
630	Aluminum Bronze	9.0 – 11.0	78.00	2.0 -4.0	1.5
655	Silicon Bronze		94.80	0.80	1.5

Nickel, max.	Phosphorus	Silicon	Zinc, max	Lead, max
			balance	0.07
			balance	0.10
4.0 – 5.5		0.25 max
0.60		2.8 – 3.8	1.50	0.2 – 0.8

Nickel and Nickel base Alloys

Alloy	General Name	Aluminum	Carbon	Chromium	Copper
400	Ni-Cu Class A		0.30		balance
500	Ni-Cu-Al	2.30 – 3.15	0.25		balance
625	Ni-Cr-Mo-Cb	0.40	0.10	0.10

Iron, max	Manganese, max	Nickel	Phosphorus	Titanium
2.50	2.00	63.0 – 70.0	0.02
2.00	1.50	63.0 – 70.0		0.35 – 0.85
5.00	0.50	58.0 min

ASTM F468 Bolts Mechanical Properties

ALLOY	MECHANICAL PROPERTY MARKING	NOMINAL THREAD DIAMETER, INCH	HARDNESSA	FULL SIZE TESTS B		MACHINED SPECIMEN TESTS
				TENSILE STRENGTH, MIN, KSI	YIELD STRENGTH, MIN, KSIC	TENSILE STRENGTH, MIN, KSI	YIELD STRENGTH, MIN, KSIC	ELONGATION IN 4D, MIN %D
COPPER ALLOYS
Cu 110	F 468A	all	65 – 90 HRF	30 – 50	10	30	10	15
Cu 260	F 468AB	all	55 – 80 HRF	60 – 90	50	55	50	35
Cu 270	F 468B	all	55 – 80 HRF	60 – 90	50	55	50	35
Cu 462	F 468C	all	65 – 90 HRF	50 – 80	25	50	25	20
Cu 464	F 468D	all	55 – 75 HRF	50 – 80	15	50	15	25
Cu 510	F 468E	all	60 – 95 HRF	60 – 90	35	55	30	15
Cu 613	F 468F	0.250 – 0.500 0.625 – 1.500	70 – 95 HRF 70 – 95 HRF	80 – 110 75 – 105	50 45	80 75	50 45	30 30
Cu 614	F 468G	all	70 – 95 HRF	75 – 110	35	75	35	30
Cu 630	F 468H	all	85 – 100 HRF	100 – 130	50	100	50	5
Cu 642	F 468J	all	75 – 95 HRF	75 – 110	35	75	35	10
Cu 651	F 468K	0.250 – 0.750 0.875 – 1.500	75 – 95 HRF 70 – 95 HRF	70 – 100 55 – 90	55 40	70 54	53 38	8 8
Cu 655	F 468L	all	60 – 80 HRF	50 – 80	20	50	15	20
Cu 661	F 468M	all	75 – 95 HRF	70 – 100	35	70	35	15
Cu 675	F 468N	all	60 – 90 HRF	55-85	25	55	25	20
Cu 710	F 468P	all	50 – 85 HRF	45-75	15	45	15	40
Cu 715	F 468R	all	60 – 95 HRF	55 – 85	20	55	20	45
NICKEL ALLOYS
Ni 59 Grade 1	F468FN	all	21 – 45 HRC	120 165	85	120	85	20
Ni 59 Grade 2	F468GN	all	23 – 47 HRC	135 – 185	125	135	125	20
Ni 59 Grade 3	F468HN	all	25 – 49 HRC	160 – 200	150	160	150	20
Ni 59 Grade 4	F468JN	all	80 HRC – 25 HRC	100 – 145	45	100	45	25
NI 335	F 468S	all	20 – 32 HRC	115 – 145	45	115	45	35
Ni 276	F 468T	all	20 – 32 HRC	110 – 140	45	110	45	25
Ni 400	F 468U	0.250 – 0.750 0.875 – 1.500	75 HRC – 25 HRC 60 HRC – 25 HRC	80 – 130 70 – 130	40 30	80 70	40 30	20 20
Ni 400 HFE	F 468HF	all	60 – 95 HRB	70 – 120	30	70	30	20
Ni 405	F 468V	all	60 HRB – 20 HRC	70 – 125	30	70	30	20
Ni 500	F 468W	0.250 – 0.875	24 – 37 HRC	130 – 180	90	130	90	20
Ni 500	F 468W	1.000 – 1.500	24 – 37 HRC	130 – 180	85	130	85	20
Ni 625	F 468AC	all	85 HRB – 35 HRC	120	60	120	60	30
Ni 686 Grade 1	F 468BN	all	21 – 45 HRC	120 – 165	85	120	85	20
Ni 686 Grade 2	F 467CN	all	23 – 47 HRC	135 – 185	125	135	125	20
Ni 686 Grade 3	F 468DN	all	25 – 49 HRC	160 – 200	150	160	150	20
Ni 686 Grade 4	F 468EN	all	65 HRB – 25 HRC	100 – 145	45	100	45	25
ALUMINUM ALLOYS
Al 2024 – T4B	F 468X	all	70 HRB	100 – 145	45	100	45	25
Al 6061 – T6	F 468Y	all	40 HRB	100 – 145	45	100	45	25
Al 6262 – T9	F 468Z	all	60 HRB	100 – 145	45	100	45	25
TITANIUM ALLOYS
Ti 1	F 468AT	all	140 – 160 HV	35 – 70	30	35	25	24
Ti 2	F 468BT	all	160 – 180 HV	50 – 85	45	50	40	20
Ti 4	F 468CT	all	200 – 220 HV	80 – 115	75	80	70	15
Ti 5Class AH	F 468DT	all	30 – 39 HRC	130 – 165	125	130	120	10
Ti 5 Class BH	F 468HT	all	30 – 39 HRC	130 – 165	125	130	120	10
Ti 7	F 468ET	all	160 – 180 HV	50 – 85	45	50	40	20
Ti 19	F 468FT	all	24 – 38 HRC	115 – 150	115	120	115	15
Ti 23	F 468GT	all	25 – 38 HRC	120 – 165	110	120	110	10
Ti-5-1-1-1	F 468AHT	all	24 – 38 HRC	105 – 150	90	100	85	10

BEST PRICE ! READY STOCK OF ASTM F468 / F468M BOLTS

• ASTM F468 Bolts
• ASTM F468 Non Ferrous Bolts
• ASTM F468M Hex Bolts manufacturers
• ASTM F468 Hex Head Bolts Supplier
• ASTM F468 Square Bolts
• ASTM F468M Bolts Exporter in India
• ASTM SF468 Screws Price in India
• F468 Hex Cap Screws Exporter in India
• ASTM F468 Studs Supplier
• ASTM F468 Socket Head Cap Screws Supplier
• ASTM F468M Bolts Manufacturer
• ASTM F468M Threaded Rods Exporter in India
• ASTM F468 Heavy Hex Bolts Distributor
• ASTM F468 Bolts Stockholder
• F468 Hexagon Bolts
• ASTM F468 Hex Head Bolts manufacturers
• ASTM F468M Screws
• F468 Hexagon Head Screw Manufacturer
• ASTM F468 Hexagon Head Cap Bolts
• ASTM F468 Studs

 

ASME SF468 Bolts stockist in India- ASME, DIN, AS, BS

ASTM F468 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

Industries & Solutions

Contruction
Industrial
Shipbuilding
Nuclear

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners

Trademark Notice

• Inconel, Incoloy and Monel are registered trademarks of Special Metals Group of Companies.
• Hastelloy is a registered trademark of Haynes International.
• 254 SMO is a trademark owned by Outokumpu Stainless.
• Sanicro 28 is a registered trademark of Sandvik AB.

Aircraft Materials & Aerospace Materials Specialist