ASTM A335 P11 Seamless Pipe
A335 gr P11 Alloy Steel Welded Pipe, SA335 Grade P11 pipe manufacturers in India
UNS K11597 High Pressure Pipe Price in Mumbai, India, Alloy Steel P11 Seamless Pipe stockist, Check ASME SA 335 Alloy Steel P11 Chrome Moly Pipes & SA335 P11 Material stock
SA335 P11 Pipe Material
ASTM A335 P11 Pipe
ASTM A335 P11 Alloy Steel Pipe
A335 P11 pipe weight can easily be obtained by use of the pipe weight calculator, you can get the best A335 P11 pipe weight calculator right here. All one has to do to get the weight of the A335 P11 pipe is just enter the values in the required fields in the calculator. The weight of A335 P11 pipes will depend on the size range of these pipes, which could be from 1/2” NB to 36” NB. The weight of A335 P11 pipes will also be dependent on their thickness range, which is inclusive of SCH 80, SCH XXS, SCH 120, SCH 40, SCH 160, SCH 100, SCH 20, SCH XS and SCH 60.
ASTM A335 P11 properties & welding is that for the welding process of ASTM A335 P11, the methods employed are electrode arc welding and tungsten arc welding. The welding materials that will be selected, will depend on the mechanical properties, the chemical composition, the conditions for welding and also the use. ASTM A335 P11 mechanical properties is that it has a minimum Elongation Percentage of L/T 30/20. It has a minimal Yield Strength of 205 MPa and it has a minimum Tensile Strength of 415 MPa. The material that is used in the manufacturing of ASTM A335 P11 has to meet requirements for hardness, tensile property and chemical composition.
ASTM A335 P11 alloy steel pipe price per Kg in India is Rs 110/Kilogram. This price would vary, based on various factors such as the size of the pipe, the length, the double random length cost, the hot dip galvanizing cost, the fix length cost, the inspection, etc. The nominal sizes of A335 P11 alloy steel pipe are 3/4 inch, 1 inch, 1/2 inch, 2 inch, 3 inch and >3 inch.
Seamless SA335 P11 Pipe & ASTM A335 P11 Pipe is stronger than ASTM A335 P11 welded Pipe - and are made by rolling a preheated billet between offset rolls to create a tube shell. These ASTM A335 grade P11 Pipes & SA335 P11 Boiler tubing, the oil and gas industries and automotive transmission components are typical applications. We stock precision ASTM A335 Alloy Steel P11 EFW Pipe for mechanical applications that satisfy both the European norm, EN 10305-1 and the various national standards in force. All ASTM A335 gr P11 Pipe & AISI P11 ERW Pipes are cold drawn to ensure the most accurate dimensional tolerances.
Table of contents
- UNS K11597 P11 Pipe Price in India
- P11 Pipe Specification
- A335 P11 Pipe Equivalent
- ASTM A335 Alloy Steel P11 Pipe chemical composition
- ASTM A335 P11 Material mechanical properties
- SA335 P11 Seamless Pipe
- Alloy Steel P11 Chrome Moly Welded Pipe
- Alloy Steel Grade P11 Pipe Weight
- P11 Alloy Steel Pipe Welding Procedure
- Alloy Steel Gr.P11 Pipe Weight Calculator
- Difference Between Low-Alloy Steel & High-Alloy Steel
Looking to Buy A335 P22 Pipe? ASTM A335 P22 Material?
Check Today's price of A335 P22 Pipe in India
ASTM A335 P11 Pipe Price in India
| Size | MSL Make | ISMT make | JSL Make |
|---|---|---|---|
1/2" |
4,264.71 |
4,257.35 |
4,272.06 |
3/4" |
4,044.12 |
4,036.76 |
4,051.47 |
1" |
3,897.06 |
3,889.71 |
3,904.41 |
1.25" |
3,852.94 |
3,845.59 |
3,860.29 |
1.5" |
3,750.00 |
3,742.65 |
3,757.35 |
Please note: All Above Prices are USD $/Ton. All price applicable for SCH 40, SCH 60, SCH 80 & SCH XS P11 Pipe.
UNS K11597 P11 Pipe Specification
| ASTM A335 Alloy Steel P11 Material Standard | ASTM A335 P11, SA335 P11 (with IBR Test Certificate) |
| SA335 P11 Size | 1/2” NB to 36” NB |
| ASTM A335 P11 Pipe Thickness | 3-12mm |
| A335 P11 Material Schedules | SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules |
| ASTM A335 P11 Pipe Origin | European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material) |
| SA335 P11 Tolerance | Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm |
| Craft | Cold rolled and Cold drawn |
| P11 Alloy Steel Pipes Type | Seamless / ERW / Welded / Fabricated |
| ASTM A335 P11 Pipe available in Form of | Round, Square, Rectangular, Hydraulic Etc. |
| ASTM A335 P11 Pipe Length | Standard Double & In Cut length also. |
| A335 P11 Material End | Plain End, Beveled End, Treaded |
| Specialized in | Large Diameter SA335 P11 Steel Pipes |
| Additional Testing | NACE MR 0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. |
| Application | Seamless Ferritic Alloy Steel Pipe for High-Temperature Service |
Alloy Steel P11 Chrome Moly Pipe suppliers
ASTM A335 P11 Seamless Pipe
ASTM A335 P11 Welded Pipe
High Pressure P11 Boiler Pipe
ASTM A335 P11 ERW Pipe
ASTM A335 P11 Alloy Steel Pipe
ASTM A335 grade P11 Pipes
ASTM A335 P11 Schedule 80 Pipe
ASTM A335 P11 Schedule 40 Pipe
ASTM A335 P11 Schedule 60 Pipe
ASTM A335 P11 Square Pipe
ASTM A335 P11 Square hollow section
ASTM A335 P11 Rectangular Tube
ASTM A335 P11 Pipe Equivalent
Alloy Steel Grade P11 Pipe equivalent
Alloy Steel P11 Pipes Standard: ASTM A335, ASME SA335
Equivalent Standards: EN 10216-2, ASTM A213, ASME SA213, GOST 550-75, NBR 5603
Alloy Steel Material: P11, K11597
Schedule: SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
| ASTM | ASME | Equivalent Material | JIS G 3458 | UNS | BS | DIN | ISO | ABS | NK | LRS |
|---|---|---|---|---|---|---|---|---|---|---|
| A335 P11 | SA335 P11 | T11 | STPA 23 | K11597 | 3604 P1 621 | - | - | ABS 11 | KSTPA 23 | - |
| ASTM International | BSi - British Standards institute | Alloy Steel Material |
|---|---|---|
| A335 Gr. P5 | 3604/625 | 5% Cr 1/2% Mo |
| A335 Gr. P9 | 3604/629 | 9% Cr 1% Mo |
| A335 Gr. P11 | 3604/621 | 1 1/4% Cr 1/2% Mo |
| A335 Gr. P12 | 3604/620 | 1% Cr 1/2% Mo |
| A335 Gr. P22 | 3604/622 | 2 1/4% Cr 1% No |
| MATERIAL | SPECIFICATION | |
|---|---|---|
| ASTM | ASME | |
| CHROME- MOLY ALLOY STEEL PIPE NOMINAL WALL SEAMLESS | A335 Grade P5 5% Chrome; ½% Moly | SA335 Grade P5 5% Chrome; ½% Moly |
| CHROME- MOLY ALLOY STEEL PIPE NOMINAL WALL SEAMLESS | A335 Grade P9 9% Chrome; 1% Moly | SA335 Grade P9 9% Chrome; 1% Moly |
| CHROME- MOLY ALLOY STEEL PIPE NOMINAL WALL SEAMLESS | A335 Grade P11 1-1/4% Chrome; ½% Moly | SA335 Grade P11 1-1/4% Chrome; ½% Moly |
| CHROME- MOLY ALLOY STEEL PIPE NOMINAL WALL SEAMLESS | A335 Grade P22 2-1/4% Chrome; 1% Moly | SA335 Grade P22 2-1/4% Chrome; 1% Moly |
| CHROME- MOLY ALLOY STEEL PIPE NOMINAL WALL SEAMLESS | A335 Grade P91 9% Chrome; 1% Moly + trace elements | SA335 P91 A335 9% Chrome; 1% Moly + trace elements |
P11 Alloy Steel Pipe chemical composition
Alloy Steel A335 P11 Pipes Chemical Composition
| Alloy Steel P11 | C | Cr | Mn | Mo | P | S | Si |
| 0.05 – 0.15 | 1.00 – 1.50 | 0.30 – 0.60 | 0.44 – 0.65 | 0.025 max | 0.025 max | 0.50 – 1.00 |
Alloy Steel Gr.P11 Pipe mechanical properties
Alloy Steel P11 UNS K11597 Pipe Mechanical Properties
| Tensile Strength, MPa | Yield Strength, MPa | Elongation |
| 415 min | 205 min | 30 min |
ASTM A335 P11 Material Heat Treatment Requirements
| Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing or Tempering Temperature Range F [C] |
|---|---|---|---|
| P5 (b,c) | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| Subcritical Anneal (P5c only) | ***** | 1325 – 1375 [715 – 745] | |
| P9 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P11 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1200 [650] | |
| P22 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P91 | Normalize and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
| Quench and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
SA335 P11 Pipe Tensile Requirements
| Seamless | |||||
|---|---|---|---|---|---|
| P-5 | P-9 | P-11 | P-22 | P-91 | |
| Tensile Strength, min., psi | |||||
| ksi | 60 | 60 | 60 | 60 | 85 |
| MPa | 415 | 415 | 415 | 415 | 585 |
| Yield Strength, min., psi | |||||
| ksi | 30 | 30 | 30 | 30 | 60 |
| MPa | 205 | 205 | 205 | 205 | 415 |
| ASTM A335 P11 Pipe Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| ASTM A335 P11 Seamless Pipe (Custom Sizes) | 1/2" NB - 60" NB | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Custom |
| ASTM A335 P11 Welded Pipe (in Stock + Custom Sizes) | 1/2" NB - 24" NB | As per requirement | Custom |
| ASTM A335 P11 ERW Pipe (Custom Sizes) | 1/2" NB - 24" NB | As per requirement | Custom |
| ASTM A335 High Pressure P11 Boiler Pipe | 16" NB - 100" NB | As per requirement | Custom |
Types of P11 Alloy Steel Pipes
| Alloy Steel P11 Pipes | P11 Alloy Steel A335 Pipe |
| ASTM A335 grade P11 Pipes | ASTM A335 P11 Alloy Steel Seamless Pipes |
| High Pressure P11 Boiler Pipe | ASME SA335 P11 Alloy Steel Rectangular Pipe |
| grade P11 Alloy Steel Hydraulic Pipe | Alloy Steel Gr P11 LSAW Pipes |
| ASME SA 335 Alloy Steel P11 Seamless Pipe | IBR Alloy Steel P11 Pipes |
| P11 Alloy Pipe | ASME SA / ASTM A335 P11 Pipes |
| High Quality Grade P11 Alloy Steel Pipes | P11 Pipes Dealer |
| Alloy A335 P11 Seamless Square Pipe | Grade P11 Hydraulic Pipes Exporter |
| AISI P11 ERW pipes | ASTM A335 P11 Pipes |
ASTM A335 P11 Pipe Schedule Chart & ASTM A335 P11 Pipe weight
Welded and seamless ASTM A335 P11 Pipe
ASTM A335 Grade P11 Alloy Steel Seamless Pipe Sizes, Dimensions and weights section modulus and gallons capacity per linear foot
| Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
| 1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
| 0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
| 0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
| 0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
| 3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
| 0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
| 0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
| 0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
| 1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
| 0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
| 0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
| 0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
| 1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
| 0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
| 0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
| 0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
| 1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
| 0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
| 0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
| 0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
| 2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
| 0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
| 0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
| 0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
| 0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
| 0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
| 0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
| 2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
| 0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
| 0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
| 0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
| 0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
| 0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
| 0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
| 3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
| 0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
| 0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
| 0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
| 0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
| 0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
| 0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
| 0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
| 0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
| 0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
| 3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
| 0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
| 0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
| 0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
| 0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
| 0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
| 4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
| 0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
| 0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
| 0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
| 0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
| 0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
| 0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
| 0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
| 0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
| 0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
| 0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
| 0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
| 0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
| 5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
| 0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
| 0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
| 0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
| 0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
| 0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
| 0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
| 0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
| 0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
| 0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
| 6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
| 0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
| 0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
| 0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
| 0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
| 0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
| 0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
| 0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
| 0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
| 0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
| 0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
| 0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
| 0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
| 0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
| 0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
| 0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
| 0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
| 1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
| 1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
Client Reference and Applications
Our ASTM A335 P11 Pipe are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality UNS K11597 P11 Pipe to our clients globally.