ASTM B865 Round Bar
Manufacturer, Supplier and Exporter of ASTM B865 Round Bar, ASTM B865 Hex Bar, ASTM B865 Rod, ASTM B865 Rounds, ASME SB865 Black bars
ASTM B865 Bar is a precipitation-hardenable material of copper-nickel and it combines the superb corrosion resistance characteristics possessed by Monel 400, but the big plus with it is that it has greater hardness and strength. As compared to Alloy 400, Monel K500 Round Bar has roughly double the tensile strength and thrice the yield strength. Also, Alloy K500 can be strengthened even more, by cold working, before carrying out precipitation hardening. The welding of Alloy K500 can be done by the process of gas-tungsten-arc welding.
ASTM B865 UNS N05500 Round Bar has a Chemical Composition of Fe 0.5 – 2, C 0.25 max, Ni 63.00 min, Mn 1.5 max, Cu 27.00 – 33.00, Si 0.5 max and S 0.010 max. K500 Monel Equivalent Grades are UNS N05500 and WERKSTOFF NR. 2.4375. The Density of K500 Monel is 8.44 g/cm3 and its Melting Point is 2460 °F (1350 °C). Monel K500 has an Elongation of 20%. The Yield Strength of K500 Monel is 1,15,000 Psi (790 MPa) and its Tensile Strength is 1,60,000 Psi (1,100 MPa). Monel K500 is an alloy of nickel-chromium and to this has been added small amounts of iron, aluminum, columbium, titanium and molybdenum.
We, Steel Tubes India, stock ASTM B865 bars and round bars in different kinds of finishes such as Rough Turned, Matt Finish, Black, NO. 4 Finish, Bright Polished and BA Finish and dimensions such as ASTM, AISI, EN, JIS, ASME and DIN, BS. The ASTM B865 round bars and bars that are available, are in tolerances such as H13K9, H11, H8, K11, H12, K12, H10, H9 and K10 and we also supply these based upon the requirements of clients. We also supply our clients with Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 and other Standard Certificates such as Raw Materials Certificate, FERRIT Content, 100% Radiography Test Report, etc.
We, Steel Tubes India, are manufacturers and suppliers of ASTM B865 UNS N05500 round bars and bars in sizes of 5 mm - 500 mm, diameters of 0.1 mm - 100 mm and lengths of 100 mm - 3000 mm long and above. These ASTM B865 Bars can be procured from us in forms such as Hex (A/F), Forging, Round, Billet, Square, Ingot, Rectangle, etc., and in specifications such as ASTM SB865 and ASTM B865. Whatever is your need for ASTM B865 bars and round bars, be sure to call us, we promise you the best rates!
Distributor of ASTM B865 Flat Bar, ASTM B865 Square bar, ASTM B865 Threaded Bar, ASTM B865 Bright Bar, ASTM B865 Monel K500 Ingot, ASTM B865 UNS N05500. Check ASTM B865 Forged Bar Price in India
ASTM B865 - 04(2015)
ASTM B865 is a Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM B865 specification covers UNS N05500 nickel-copper-aluminum alloy rounds, squares, hexagons, rectangles, and forgings and forging stocks manufactured by either hot working or cold working, and cold-worked wire. ASTM B865 material should conform to the required mechanical properties in both aged and unaged conditions. Precipitation hardening is accomplished by holding the material at a high temperature, followed by furnace cooling and then air cooling.
reference: https://www.astm.org/
Looking to buy Alloy 625 Round Bar? Inconel 625 Round Bar?
Check Today's price of Inconel 625 Round Bar in India

1. Scope
1.1 ASTM B865 specification covers nickel-copper-aluminum alloy (UNS N05500) in the form of rounds, squares, hexagons, or rectangles, and forgings and forging stock, manufactured either by hot working or cold working, and cold-worked wire.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Forms available of ASTM B865 Bars:
ASTM B865 Bar | ASME SB865 Rod |
---|---|
ASTM B865 Square Bar | ASTM B865 Black bars |
ASTM B865 Threaded Bar | ASTM B865 Rectangular Bar |
ASTM B865 Bright Bar | ASTM B865 Rounds |
ASTM B865 Billet | ASME SB865 Unpolished Round Bar |
ASTM B865 Cold Finish Bar Round Bar | ASTM B865 Half Round Bar |
ASTM B865 Cold Finished Round Bar | ASTM B865 Hot Rolled Round Bar |
ASTM B865 Cold Drawn Round Bar | ASTM B865 Cold Rolled Round Bar |
ASTM B865 Square Round Bar | ASTM B865 36" Round Bar |
ASTM B865 Cold Drawn Round Bar | Mill Finish ASTM B865 Round Bar |
ASTM B865 Round Rods | ASTM B865 Hex Bar |
ASTM B865 Flat Bar | ASTM B865 Rod Bar |
ASTM B865 Ingot supplier | ASME SB865 Hollow Bar |
ASTM B865 Shaft Bar | ASTM B865 Rectangle Bar |
ASTM B865 Hollow Round Bar | ASTM B865 Forged Bar |
ASTM B865 Extruded Round Bar | ASTM B865 3 Ft Round Bar |
ASTM B865 Polished Round Bar | ASME SB865 6 Ft Round Bar |
ASTM B865 Block | ASME SB865 Rods |
ASTM B865 Material Stock

- ASTM B865 Rolled Bars
- B865 Hot Rolled Bars
- B865 Cold Rolled Bars
- ASME SB865 Forged Bars
- B865 Continuous Cast Bars
- B865 Annealed Bars
- B865 Normalized Bars
- B865 Quenched & Tempered Bars
- ASME SB865 Hardened & Tempered Bars
- B865 Black Bars
- B865 Bright Bars
- B865 Peeled Bars
- B865 Grinded Machined Bars
- ASME SB865 Rolled Billets
- B865 Hot Rolled Billets
- B865 Annealed Rods

- ASTM B865 Cold Rolled Billets
- B865 Forged Billets
- B865 Continuous Cast Billets
- B865 Annealed Billets
- B865 Normalized Billets
- B865 Quenched & Tempered Billets
- ASME SB865 Hardened & Tempered Billets
- B865 Black Billets
- B865 Bright Billets
- B865 Peeled Billets
- B865 Grinded Machined Billets
- B865 Rolled Blooms
- B865 Hot Rolled Blooms
- B865 Cold Rolled Blooms
- ASME SB865 Forged Blooms

- ASTM B865 Continuous Cast Blooms
- B865 Annealed Blooms
- ASME SB865 Normalized Blooms
- B865 Quenched & Tempered Blooms
- B865 Hardened & Tempered Blooms
- B865 Black Blooms
- B865 Bright Blooms
- ASME SB865 Peeled Blooms
- B865 Grinded Machined Blooms
- B865 Rolled Rods
- B865 Hot Rolled Rods
- B865 Cold Rolled Rods
- B865 Forged Rods
- B865 Concast Rods
- B865 Normalized Rods

- ASTM B865 Flat Block Billets
- B865 Rectangular Billets
- B865 Hexagonal Billets
- B865 Hollow Billets
- ASME SB865 Hollow Ring Billets
- B865 Circular Billets
- B865 Round Blooms
- B865 Flat Blooms
- B865 Square Blooms
- B865 Round Corner Square Blooms
- B865 Flat Block Blooms
- B865 Rectangular Blooms
- B865 Hexagonal Blooms
- B865 Hollow Blooms
- B865 Hollow Ring Blooms
- ASME SB865 Circular Blooms
- B865 Hollow Ring Bars

- ASTM B865 Circular Bars
- B865 Round Rods
- B865 Flat Rods
- B865 Square Rods
- ASME SB865 Round Corner Square Rods
- B865 Flat Block Rods
- B865 Rectangular Rods
- B865 Hexagonal Rods
- B865 Hollow Rods
- B865 Hollow Ring Rods
- B865 Circular Rods
- ASME SB865 Round Billets
- B865 Flat Billets
- B865 Square Billets
- B865 Round Corner Square Billets
- B865 Hollow Bars

- ASME SB865 Quenched & Tempered Rods
- B865 Hardened & Tempered Rods
- B865 Black Rods
- B865 Bright Rods
- B865 Peeled Rods
- B865 Grinded Machined Rods
- ASME SB865 Round Bars
- B865 Flat Bars
- B865 Square Bars
- B865 Round Corner Square Bars
- B865 Flat Block Bars
- B865 Rectangular Bars
- B865 Hexagonal Bars supplier
Pipe, Tube & Tubing
Sheet, Plate
Round Bar & fasteners