ASTM B468 Tubing

Manufacturer, Supplier and Exporter of Nickel Alloy ASTM B468 Pipes, ASME SB468 Tubing, ASTM B468 Welded Tubes

At Steel Tubes India, to ensure that our ASTM B468 Tube conform to the highest quality standards, we carry out various quality tests such as Spectro Analysis, Micro and MacroTest, Flaring Test, Hardness Test, Intergranular Corrosion Test, Flattening Test, PMI Testing, etc. We also run all the required tests to ensure that the material conforms to all the required mechanical property requirements such as Tensile Strength, Elongation and Yield Strength, as well as to the composition limits specified. Per lot of these tubes, we carry out flange tests and flattening tests, on each end of one tube.

The specification of ASTM B468 Welded Tube, covers welded pipes of Alloy 20, which are used for the purpose of resistance against general corrosion, in various industries and applications such as power generation, condenser tubes, petrochemicals, heat exchangers, pharmaceuticals, boilers, pulp and paper, sea water equipment, gas processing, etc. These tubes also display superb resistance to corrosion in environs that are alkaline and acidic. It is good to use these tubes, where tapping and drilling large holes requires the use of sturdy machinery and plenty of power.

Carpenter 20 Welded Tube are manufactured by the process of automatic welding, using flat rolled stock and there is absolutely no need for the adding of a filler material, in this process. It is possible to form these welded tubes into various shapes such as rectangular, square, round, etc. This material can be cold-worked in just the weld metal only or in both the base metal, as well as the weld metal. These tubes can be face–turned and bored on almost any kind of machine.

We, Steel Tubes India, are manufacturers and suppliers of Alloy 20 Tube to all corners of the globe. These tubes are available from us in lengths within 13,500 mm and sizes ranging from 6.00 mm OD up to 914.4 mm OD. These tubes are available with us in thicknesses of 0.3 mm – 50 mm, SCH 160, SCH10, SCH XXS, SCH 40, SCH 80S, SCH 80 and SCH 5. The type of these tubes is Welded Tubes and they can be procured from us in grades such as Carpenter 20 Welded Tube, ASTM B468 Welded Tube, ASTM B468 UNS N08020 and Alloy 20 Welded Tubes. We also supply Test Certificates certifying NACE MR0103, NACE MR0175, etc. If you are seeking the best quality product at the best market price, just give us a call.

Alloy 20 ASTM B468 Welded Tube, ASTM B468 UNS N08020. Check ASTM B468 Carpenter 20 Tube Price in India

ASTM B468 - 04

Standard Specification for Welded UNS N08020, N08024, N08026 Alloy Tubes and Welded UNS N08020 Alloy Tubes

ASTM B468 specification covers welded UNS N08020, N08024, and N08026 alloy boiler, heat exchanger, and condenser tubes for general corrosion-resisting and low- or high-temperature service. ASTM B468 specification covers tubes 1/8 to 5 in. (3.18 to 127 mm), inclusive, in outside diameter and 0.015 to 0.500 in. (0.38 to 12.70 mm), inclusive, in wall thickness.


Looking to buy Alloy 625 Tubing? Inconel 625 Tubing?

Check Today's price of Inconel 625 Tubing in India

Inconel 625 Tubing supplier


Distributor of ASTM B468 Carpenter 20 Tube, Supplier of ASTM B468 Nickel Alloy Tubes, ASTM B468 Alloy UNS N08020 Welded Tube, ASTM B468 Alloy 20 Welded Tube, ASME SB468 Tubes stockist in Mumbai, India.

ASME SB468 Alloy 20 Tubing, ASTM B468 Alloy 20 Welded Tube, ASTM B468 Welded Nickel Alloy Tube, Nickel Alloy 20 Tubes, Nickel Alloy N08024 Tube, ASTM B468 Tube supplier in India.

ASTM B468 Welded Tubes Specifications

Size 6.00 mm OD up to 914.4 mm OD
Thickness 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
Length Within 13500mm
Type Welded Tubes
Grades ASTM B468 Welded Tube, Alloy 20 Welded Tubes, ASTM B468 UNS N08020, ASTM B468 Welded Tube, ASTM A182 UNS N08020


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist