Manufacturer, Supplier and Exporter of ASTM B424 Sheet, ASTM B424 Plate, ASTM B424 Clad Plate, ASTM B424 Coils

At the mill, during the process of manufacturing, ASTM B424 Sheet Plate are heated. This heating is done so as to get the best possible combination of formability, resistance to corrosion, mechanical properties and stabilization. The specification ASTM B424, is a standard that refers to Incoloy 825 Plate, strips and sheets. At room temperature, this material exhibits superb impact strength and at cryogenic temperatures it retains its strength.

We, at Steel Tubes India, go to great lengths to ensure that the sheets or plates of astm b424 uns n08825, conform to the requirements of mechanical property and chemical composition, as is specified for this material. To ensure that our quality meets national and international standards, we run various quality tests on our strips and sheets, some of which are Pitting Resistance Test, Spectro Analysis, Flattening Test, Hardness Test, Flaring Test, etc. To assure our clients that are plates, strips and sheets are of the highest quality, we supply them with various kinds of documentation such as Fumigation Certificates, Quality Assurance Plan (QAP), NABL approved Laboratory Test Reports, Commercial Invoice which includes HS Code, Heat Treatment Charts, Guarantee Letter, etc.

astm b424 n08825 are used in many industries, in many applications, for acid production, chemical processing, pickling operations, handling of radioactive wastes, oil and gas recovery, pollution control and nuclear fuel reprocessing. In oxidized, as well as reducing environs, ASTM B424 Alloy Sheet can resist intergranular corrosion, pitting, stress-corrosion cracking, crevice corrosion and general corrosion.

We, Steel Tubes India, are manufacturers and suppliers of astm b424 uns no 8825 Plate and these sheets can be procured from us in thicknesses from 0.1 mm to 12 mm and in specifications of ASTM / ASME SB 424. We manufacture and stock these sheets in sizes of 1500 mm x 3000 mm, 1000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm and 2000 mm x 2000 mm. We supply these sheets in finishes of SATIN (Met with Plastic Coated), Cold rolled sheet (CR), BA NO(8), 2B, Hot rolled plate (HR) and 2D. The Hardness of these sheets is Quarter Hard, Hard, Spring Hard, Half Hard, Soft, etc. With us these sheets are available in the following forms: Shim Sheet, Rolls, Blank (Circle), Coils, Plain Sheet, Strip, Ring (Flange), Foils and Flats. For your requirements of plates, strips and sheets of Inconel 825, at the best possible prices, just give us a call.

Distributor of ASTM B424 Strip, ASTM B424 UNS N08825, UNS N08221, UNS N06845 Plate, ASTM B424 Clad Sheet, ASTM B424 Foils Stockist. Check price of ASTM B424 Plates in India

ASTM B424 - 11(2016)

Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

ASTM B424 specification covers rolled nickel-iron-chromium-molybdenum-copper alloy (UNS N08825 and UNS N08221) plate, sheet, and strip. The material shall conform to the chemical composition requirements specified by the reference material. The material shall conform to the mechanical properties specified by the reference material.


Looking to buy Alloy 625 Plate? Inconel 625 Plate?

Check Today's price of Alloy 625 Plate in India

Alloy 625 Plate supplier


1. Scope

1.1 This specification2 covers rolled nickel-iron-chromium-molybdenum-copper alloy (UNS N08825, UNS N08221, and UNS N06845)3 plate, sheet, and strip.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

ASTM B424 Material Stock

B424 Plates B424 Sheet
B424 Plain Sheet B424 2B Plate
B424 Clad Plate B424 Clad Sheet
B424 Plate ASME SB424 Plate
B424 Shim Sheets B424 Cold Rolled Plates
B424 slitting coils B424 Perforated sheet
B424 Polished Cold Drawn Plates B424 Strips
B424 Foils B424 Rolls
B424 2D Plate B424 BA NO(8) Plate
B424 Sheet ASME SB424 Sheet
B424 Coils B424 Hot Rolled Plates
B424 Polished Plates B424 Chequered Plate

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners

Trademark Notice

Aircraft Materials & Aerospace Materials Specialist