ASTM B408 Round Bar

Manufacturer, Supplier and Exporter of ASTM B408 Round Bar, ASTM B408 Hex Bar, ASTM B408 Rod, ASTM B408 Rounds, ASTM B408 Black bars

ASTM B408 Bar falls under the specification of ASTM B408, which includes Incoloy 800 rods and bars. These bars are used in carburizing equipment, dampers, heat exchangers, process piping, nuclear steam–generator tubing, nitric acid catalyst supports, heating–element sheathing, etc. Incoloy 800 Round Bar is available in the form of cold-worked or hot-worked.  Round bars of Incoloy 800 are composed of nickel-chromium alloy, to which has been added small quantities of aluminum, iron, titanium, columbium and molybdenum.

Even in environs that are acidic, astm b408 uns n08811 Round Bar can resist corrosion. Equivalent Grades of Incoloy 800 are EN X10NiCrAlTi32-20, UNS N08800, GOST ЭИ670, JIS NCF 800, AFNOR Z8NC32-21, WERKSTOFF NR. 1.4876 and BS NA 15. Incoloy 800 has a Tensile Strength of 520 MPa (75,000 Psi) and a Yield Strength of 205 MPa (30,000 Psi). The Elongation of Incoloy 800 is 30% and the Melting Point is 2525 °F (1385 °C). Incoloy 800 has a Density of 7.94 g/cm3. Incoloy 800 displays very good cold forming characteristics and it has a carbon range of 0.05% - 0.10%.

Bars of ASTM B408 UNS N08800 are available with us in finishes of Rough Turned, Black, NO. 4 Finish, BA Finish, Matt Finish and Bright Polished and in dimensions of ASME, EN, ASTM, DIN, BS, JIS, and AISI. These round bars can be procured from us in tolerances of H13K9, H9, K11, H12, H8, H11, K12, H10 and K10 or we can also deliver them catering to specific needs of clients. We provide our clients with Test Certificates certifying NACE MR0103, NACE MR0175 and other Standard Certificates like Raw Materials Certificate, Third Party Inspection Report, FERRIT Content, 100% Radiography Test Report, etc.

We, Steel Tubes India, manufacture and supply ASTM B408 Round Bar and these are obtainable from us in sizes of 5 mm - 500 mm and specifications of ASTM SB408/ASTM B408. These astm b408 uns no 8811 round bars can be procured from us in lengths of 100 mm - 3000 mm long and above and in forms of Ingot, Square, Rectangle, Round, Billet, Hex (A/F), Forging, etc. These round bars of ASTM B408 are available with us in diameters of 0.1 mm - 100 mm. If you are hunting for astm b408 uns no 8810 round bars of the highest quality, at the best price, be sure to call us, you won’t get a better deal than the one we can give you!

Distributor of ASTM B408 Threaded Bar, ASTM B408 Bright Bar, ASTM B408 Square bar, ASTM B408 Welding Rod, ASTM B408 Shaft, ASTM B408 Hollow Bar, ASTM B408 UNS N08810, ASTM B408 UNS N08800, ASME SB408 Rectangular Bar, ASTM B408 Billet, ASTM B408 UNS N08811, ASTM B408 Flat Bar Stockist, Check ASTM B408 Forged Bar Price in India

ASTM B408 - 06(2016)

ASTM B408 is a Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

ASTM B408 specification covers nickel-iron-chromium alloys UNS N08120, UNS N08800, UNS N08810, UNS N08811, and UNS N08890 in the form of hot-worked and cold-worked rod and bar. ASTM B408 material shall be subjected to heat treatment, and its composition shall conform to the chemical requirements for nickel, chromium, iron, manganese, carbon, copper, silicon, sulfur, aluminum, titanium, columbium, molybdenum, niobium, tantalum, phosphorus, tungsten, cobalt, nitrogen, and boron. ASTM B408 material shall conform to mechanical property requirements for tensile strength, yield strength, and elongation. Test methods (chemical analysis, tension test, grain size test) shall be performed in accordance to referenced ASTM documents itemized herein.

reference: https://www.astm.org/

Looking to buy Alloy 600 Round Bar? Inconel 600 Round Bar?

Check Today's price of Inconel 600 Round Bar in India

Inconel 600 Round Bar supplier

       

1. Scope

1.1 ASTM B408 specification covers UNS N08120, UNS N08800, UNS N08810, UNS N08811,3 and UNS N08890 in the form of hot-worked and cold-worked rod and bar. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08120, UNS N08810, UNS N08811, and UNS N08890 are normally employed in service temperatures above 1100°F (593°C) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Annealing - Bars And Rods - Cold Working - Creep Resistance - Creep Strength - Forming - Grain Size - High-Temperature Service Applications - High-Temperature Services - Hot Working - ASTM B408 Nickel Alloy Bars - ASTM B408 Nickel Alloy Rods - Nickel-Iron-Chromium Alloys.

reference: https://www.astm.org/

Forms available of ASTM B408 Bars:

ASTM B408 Bar ASME SB408 Rod
ASTM B408 Square Bar ASTM B408 Black bars
ASTM B408 Threaded Bar ASTM B408 Rectangular Bar
ASTM B408 Bright Bar ASTM B408 Rounds
ASTM B408 Billet ASME SB408 Unpolished Round Bar
ASTM B408 Cold Finish Bar Round Bar ASTM B408 Half Round Bar
ASTM B408 Cold Finished Round Bar ASTM B408 Hot Rolled Round Bar
ASTM B408 Cold Drawn Round Bar ASTM B408 Cold Rolled Round Bar
ASTM B408 Square Round Bar ASTM B408 36" Round Bar
ASTM B408 Cold Drawn Round Bar Mill Finish ASTM B408 Round Bar
ASTM B408 Round Rods ASTM B408 Hex Bar
ASTM B408 Flat Bar ASTM B408 Rod Bar
ASTM B408 Ingot supplier ASME SB408 Hollow Bar
ASTM B408 Shaft Bar ASTM B408 Rectangle Bar
ASTM B408 Hollow Round Bar ASTM B408 Forged Bar
ASTM B408 Extruded Round Bar ASTM B408 3 Ft Round Bar
ASTM B408 Polished Round Bar ASME SB408 6 Ft Round Bar
ASTM B408 UNS N02201 Block ASME SB408 Rods

 

 


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist