ASTM B165 Tubing

ASTM B165 Pipe supplier, ASTM B165 Tubing stockist, ASTM B165 Monel Tube, ASTM B165 UNS N04400

We, Steel Tubes India are a highly established, international manufacturer and supplier of ASTM B165 Pipe Tube. ASTM B165 Seamless Pipe are used a lot in environments that are extremely severe, such as industrial waste treatment, production of paper and pulp, control of pollution, sour natural gas recovery, municipal waste treatment, processing of chemicals, etc. In such environments, it is very good to use a nickel based material, as this kind of material shows very high resistance to localized corrosion in these harsh environments.

As is quite obvious in the very name itself, Monel 400 Tube, are pipes that do not have a weld-joint or a seam. Because of the lack of the weld-joint or seam, these kinds of pipes have a very uniform strength and structure, all across the body of the pipe. Monel Tubing are extruded and drawn from a billet and because of this, they have the capacity to withstand higher mechanical stress, higher temperatures, corrosive atmospheres and higher pressures. Also, because of this, these pipes/tubes find use in many applications and industries such as fertilizer, structural applications, refineries, oil & gas, automotive, petrochemicals, power plants, mechanical, chemical plants, bearings, etc.

With regards to the welding of ASTM B165 Seamless Tube, prior to doing any welding, it is very important that all foreign matter should first be removed. Foreign matter includes the likes of cutting fluids, scale, crayon markings and grease. Also, the surface that is going to be welded and all the areas that are adjacent to the surface that is going to be welded, must first be thoroughly cleansed with the right kind of solvent, such as 99.9% isopropanol (IPA). It is also important that solution annealing is carried out of these tubes, at a temperature of 2150 °F, the duration of time of which will be relevant to the tube section size.

The length of ASTM B165 Tube that is available with us, Steel Tubes India , is within 13,500 mm, the thickness range is from 1 mm to 20 mm and these pipes/tubes are available from us in sizes ranging from 1/2" – 10" / 4 to 219 mm W. T.: 0.5 to 20 mm. The Type is Seamless Tubes and Seamless Pipes and the Grade is Monel 400 (UNS No. N04400). Our materials are all Certified and we provide Test Certificates certifying NACE MR0103, NACE MR0175, etc.

Distributor of ASTM B165 Seamless Pipe, ASTM B165 Seamless Tube, ASTM B165 Monel Tubing suppliers, ASTM B165 Monel, ASTM B165 Monel 400

ASTM B165 - 05(2014)

Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

Abstract

This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification2 covers nickel-copper alloy UNS N044003 in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.

1.1.1 Hot worked material is available. Properties and permissible tolerances are to be agreed upon between the manufacturer and purchaser.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

More details: https://www.astm.org/Standards/B165.htm

Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?

Check Today's price of Alloy 600 Tubing in India

Alloy 600 Tubing supplier

       

ASTM B165 Monel UNS N04400 Seamless Tube, ASTM B165 Nickel-Copper Alloy Seamless Tubes, ASTM B165 Monel Alloy Pipes, ASTM B165 Monel 400 Seamless Tube Suppliers in Mumbai, India.

ASME SB165 Tubes, ASTM B165 Monel Alloy Pipe, ASTM B165 Monel Alloy Seamless Pipe, ASME SB165 400 Monel Seamless Pipe, ASME SB165 Monel Seamless Pipe Stockist
ASTM B165 Seamless Pipes and Tubes Specifications
Size 1/2″ – 10″ / 4 to 219mm W. T.: 0.5 to 20mm
Thickness 1mm to 20mm
Length Within 13500mm
Type Seamless Pipes, Seamless Tubes
Grades Monel 400 (UNS No. N04400)

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist