ASTM B164 Round Bar

Manufacturer, Supplier and Exporter of ASTM B164 Hex Bar, ASTM B164 Round Bar, ASTM B164 Monel Rounds, ASTM B164 Rod, ASTM B164 Black bars

ASTM B164 Bar, round bars and rods are available in the form of cold-worked or hot-worked. Alloy 400 bar has superb heat and cryogenic ranges, it offers very good resistance to corrosion, it has high strength and it has excellent resistance to thermal oxidation. In most freshwaters, ASTM B164 Bars display very good stress-corrosion cracking resistance. At subzero temperatures, these bars exhibit superb mechanical properties.

Monel 400 Bar, is covered in the ASTM B164 specification that includes alloys of Nickel Copper Alloy (UNS N04400), in the form of cold-worked or hot-worked wires, rods and bars. 400 Monel Round Bar Equivalent Grades are GOST МНЖМц 28-2,5-1,5, UNS N04400, EN NiCu30Fe, BS NA 13, AFNOR NU-30M, WERKSTOFF NR.   2.4360 and JIS NW 4400. Monel 400 has a Density of 8.8 g/cm3 and a Melting Point of 2460 °F (1350 °C). The Yield Strength of Monel 400 is 35,000 Psi (240 MPa) and the Tensile Strength is 80,000 Psi (550 MPa). Monel 400 has an Elongation of 40%. The Chemical Composition of Monel 400 is Cu 28.00 – 34.00, Si 0.50 max, C 0.30 max, Fe 2.50 max, Mn 2.00 max, S 0.024 max and Ni 63.00 min.

We, Steel Tubes India, stock and supply ASTM B164 UNS N04400 round bars, to clients all over the world, in tolerances of H13K9, H8, K12, H9, K10, H10, H12, H11 and K11 or we even supply these as per the specific needs of clients. These ASTM B164 Round Bars can be obtained from us in finishes such as Rough Turned, Black, BA Finish, NO. 4 Finish, Bright Polished and Matt Finish and in forms such as Forging, Round, Rectangle, Square, Billet, Hex (A/F), Ingot, etc. These bars are available with us in specifications of ASTM B164 / ASTM SB164.

We, Steel Tubes India, are manufacturers and suppliers of ASTM B164 Round Bar and these types of round bars can be procured from us in lengths of        100 mm - 3000 mm long and above and in sizes of 5 mm - 500 mm. These ASTM B164 Round Bars are available with us in diameters of 0.1 mm - 100 mm and in dimensions of ASTM, AISI, DIN, ASME, EN, JIS and BS.  For all your needs of ASTM B164 Round Bars of the highest international quality and specifications – at the best possible rates imaginable, all you have to do is talk to us.

Distributor of ASTM B164 Square bar, ASTM B164 Threaded Bar, ASTM B164 Bright Bar, ASTM B 164 GR 400 Welding Rod, ASME SB164 Rectangular Bar, ASTM B164 ALLOY 400 Billet, ASTM B164 Forged Bar, ASTM B164 Ingot, ASTM B164 N04400 Flat Bar Stockist, ASTM B164 UNS N04400, ASTM B164 MONEL 400 Hollow Bar, Check ASTM B164 MATERIAL Price in India

ASTM B164 STANDARD

ASTM B164 - 03(2014)

ASTM B164 is a Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

ASTM B164 specification covers nickel-copper alloys UNS N04400 and N04405 in the form of hot-worked and cold-worked rod, bar, and wire. ASTM B164 material shall conform to the chemical composition limits specified by the reference material. ASTM B164 materials for rod, bar, or wire shall conform to the mechanical properties specified by the reference material. One test per lot shall be performed for chemical analysis, tension test, hardness test, and wrapping test.

reference: https://www.astm.org/

Looking to buy Alloy 600 Round Bar? Inconel 600 Round Bar?

Check Today's price of Inconel 600 Round Bar in India

Inconel 600 Round Bar supplier

       

1. Scope

1.1 ASTM B164 specification covers nickel-copper alloys UNS N04400 and N044053 in the form of hot-worked and cold-worked rod and bar in the conditions shown in Table 1 and cold-worked wire in the conditions

(1) Not applicable to diameters or cross sections under 3/32 in. (2.4 mm).
(2) For sections under 1/2 in. (12.7 mm), the elongation shall be 10 % min.
(3) For hot-worked flats 5/16 in. (7.9 mm) and under in thickness the elongation shall be 20 % min.
(4) Forging quality is furnished to chemical requirements and surface inspection only. No tensile properties are required.
(5) Properties are not applicable to wire after straightening and cutting.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 ASTM B164 standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

reference: https://www.astm.org/

Related searching:

ASTM B164 PDF, ASTM B164 MONEL, ASTM B164 UNS N04400, ASTM B164 CLASS A, ASTM B164 MONEL 400, ASTM B164 CLASS B, ASTM B164 ALLOY 400, ASTM B164 CHEMICAL COMPOSITION, ASTM B164 MATERIAL, ASTM B164 STANDARD PDF, ASTM B 164 GR 400, ASTM B164 N04400, ASTM B164 NO 4400, ASTM B164 STANDARD, ASTM B164-03, ASTM B164 UNS NO4400, ASTM B164 Monel Bars And Rods - ASTM B164 Cold-Worked Nickel Alloy Bars - ASTM B164 Cold-Worked Nickel Alloy Rods - ASTM B164 Cold-Worked Nickel Alloy Wires - ASTM B164 Hot-Worked Nickel Alloy Bars - ASTM B164 Hot-Worked Nickel Alloy Rods - ASTM B164 Hot-Worked Nickel Alloy Wires - ASTM B164 Nickel-Copper Alloys - ASTM B164 Wires

Forms available of ASTM B164 Bars:

ASTM B164 Bar ASME SB164 Rod
ASTM B164 Square Bar ASTM B164 Black bars
ASTM B164 Threaded Bar ASTM B164 Rectangular Bar
ASTM B164 Bright Bar ASTM B164 Rounds
ASTM B164 Billet ASME SB164 Unpolished Round Bar
ASTM B164 Cold Finish Bar Round Bar ASTM B164 Half Round Bar
ASTM B164 Cold Finished Round Bar ASTM B164 Hot Rolled Round Bar
ASTM B164 Cold Drawn Round Bar ASTM B164 Cold Rolled Round Bar
ASTM B164 Square Round Bar ASTM B164 36" Round Bar
ASTM B164 Cold Drawn Round Bar Mill Finish ASTM B164 Round Bar
ASTM B164 Round Rods ASTM B164 Hex Bar
ASTM B164 Flat Bar ASTM B164 Rod Bar
ASTM B164 Ingot supplier ASME SB164 Hollow Bar
ASTM B164 Shaft Bar ASTM B164 Rectangle Bar
ASTM B164 Hollow Round Bar ASTM B164 Forged Bar
ASTM B164 Extruded Round Bar ASTM B164 3 Ft Round Bar
ASTM B164 Polished Round Bar ASME SB164 6 Ft Round Bar
ASTM B164 UNS N02201 Block  

 

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist