ASTM B160 Round Bar
Manufacturer, Supplier and Exporter of ASTM B160 Hex Bar, ASTM B160 Round Bar, ASTM B160 Rounds, ASTM B160 Rod, ASTM B160 Black bars
ASTM B160 Bar is covered in the ASTM B160 specification, which includes round bars of UNS N02201 and UNS N02200. These bars are available in the form of annealed, cold-worked or hot-worked. ASTM B160 bars and round bars exhibit very good resistance to corrosion, they are resistant to heat and they also have high strength. Nickel Alloy 200 Round Bar are used in various processes and applications such as power generation, heat treating baskets, oil and gas, barreling, aerospace, waste treatment piping, aircraft, pollution control, defense, etc.
The Equivalent Grade of Nickel Alloy 201 Round Bar is GOST НП-2, UNS N02201, BS NA 12, WERKSTOFF NR. 2.4068, EN LC-Ni 99 and JIS NW 2201. Nickel Alloy 201 has a Yield Strength of 21,500 Psi (148 MPa) and a Tensile Strength of 67,000 Psi (462 MPa). The Elongation of Nickel Alloy 201 is 45% and it has a Melting Point of 2635 °F (1446 °C) and a Density of 8.9 g/cm3. ASTM B160 round bars display very good weldability and
metallurgical stability. As they exhibit very good resistance to heat, they are used in high temperature processes.
We stock ASTM B160 UNS N02200 round bars and bars in finishes of Bright Polished, Matt Finish, NO. 4 Finish, Black, BA Finish and Rough Turned and in forms such as Rectangle, Forging, Square, Billet, Round, Ingot, Hex (A/F), etc. These ASTM B160 bars and round bars can be purchased from us in dimensions of JIS, EN, ASME, DIN, BS, AISI and ASTM and in tolerances of K10, H9, H12, K11, H8, H11, K12, H13K9 and H10 and we can also deliver these based on specific requirements of clients. We also supply our clients with Test Certificates certifying NACE MR0103, NACE MR0175, etc.
We, Steel Tubes India, are manufacturers and sellers of ASTM B160 UNS N02201 round bars and bars and these can be purchased from us in specifications of ASTM SB160 and ASTM B160 and in sizes of 5 mm - 500 mm. We supply these ASTM B160 bars and round bars, to companies all over the globe, in lengths of 100 mm - 3000 mm long and above and in diameters of 0.1 mm to 100 mm. For all your needs of the highest quality ASTM B160 bars and round bars, be sure to call us – you will find it tough to get a better deal than the one we can give you!
Distributor of ASTM B160 Square bar, ASTM B160 UNS N02201, ASTM B160 Threaded Bar, NICKEL ASTM-B160 Bright Bar, ASTM B160 Welding Rod, ASME SB160 Rectangular Bar, ASTM B160 Billet, ASTM B160 Ingot, ASTM B160 Flat Bar, ASTM B160 Shaft, ASTM B160 Hollow Bar stockist. Check ASTM B160 Forged Bar Price in India
ASTM B160 - 05(2014)
ASTM B160 is a Standard Specification for Nickel Rod and Bar
ASTM B160 specification covers nickel (UNS N02200), low carbon nickel (UNS N02201), and solution strengthened nickel (UNS N02211) in the form of hot-worked, cold-worked, or annealed rods and bars of round, square, hexagonal, or rectangular solid section. ASTM B160 UNS N02201 & ASTM B160 UNS N02200 shall conform to the chemical composition limits specified for nickel, copper, iron, manganese, carbon, silicon, and sulfur. Mechanical requirements including tensile strength, yield strength, and elongation are given for specific conditions and diameter or distance between parallel surfaces. Chemical analysis, tension test, and hardness test shall be performed.
reference: https://www.astm.org/
Click on below products to check Latest Price List
Looking to buy Alloy 718 Round Bar? Inconel 718 Round Bar?
Check Today's price of Inconel 718 Round Bar in India
1. Scope
1.1 ASTM B160 specification covers nickel (UNS N02200),3 low carbon nickel (UNS N02201),3 and solution strengthened nickel (UNS N02211) in the form of hot-worked and cold-worked rod and bar in the conditions.
(a) Not applicable to diameters or cross sections under 3/32 in. (2.4 mm).
(b) For hot-worked flats 5/16 in. (7.9 mm) and under in thickness the elongation shall be 25 %, min.
(c) Hardness B45 to B80, or equivalent.
(d) Hardness B45 to B70 or equivalent.
(e) Forging quality is furnished to chemical requirements and surface inspection only. No tensile properties are required.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Grades:
ASTM B160 Bars And Rods - ASTM B160 N02200 Cold-Worked Nickel Bars - ASTM-B160 Cold-Worked Nickel Rods - ASTM-B160 Commercial Nickel - ASTM-B160 Hot-Worked Nickel Alloy Bars - ASTM-B160 Hot-Worked Nickel Alloy Rods
ASTM B160 UNS N02201 Bar Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN |
|---|---|---|---|---|---|---|---|
| Nickel 200 | 2.4066 | N02200 | НП-2 | N-100M | NW 2200 | NA 11 | Ni 99.2 |
ASTM B160 N02200 Round, Bright, Hex, Threaded Bar Chemical Composition
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
|---|---|---|---|---|---|---|---|---|---|
| Nickel 200 | 99.0 min | 0.4 max | 0.15 max | 0.35 max | 0.1 max | 0.25 max | - | - | 0.01 max |
NICKEL ASTM-B160 Round Bars Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
BEST PRICE ! READY STOCK OF
| ASTM B160 Bar | ASTM B160 Rod |
|---|---|
| ASTM B160 Square Bar | ASTM B160 Black bars |
| ASTM B160 Threaded Bar | ASTM B160 Rectangular Bar |
| ASTM B160 Bright Bar | ASTM B160 Rounds |
| ASTM B160 Billet | ASME SB160 Unpolished Round Bar |
| ASTM B160 Cold Finish Bar Round Bar | ASTM B160 Half Round Bar |
| ASTM B160 Cold Finished Round Bar | ASTM B160 Hot Rolled Round Bar |
| ASTM B160 Cold Drawn Round Bar | ASTM B160 Cold Rolled Round Bar |
| ASTM B160 Square Round Bar | ASTM B160 36" Round Bar |
| ASTM B160 Cold Drawn Round Bar | Mill Finish ASTM B160 Round Bar |
| ASTM B160 Round Rods | ASTM B160 Hex Bar |
| ASTM B160 Flat Bar | ASTM B160 Rod Bar |
| ASTM B160 Ingot supplier | ASME SB160 Hollow Bar |
| ASTM B160 Shaft Bar | ASTM B160 Rectangle Bar |
| ASTM B160 Hollow Round Bar | ASTM B160 Forged Bar |
| ASTM B160 Extruded Round Bar | ASTM B160 3 Ft Round Bar |
| ASTM B160 Polished Round Bar | ASME SB160 6 Ft Round Bar |
| ASTM B160 UNS N02201 Block |
B160 Material Stock
- B160 Rolled Bars
- B160 Hot Rolled Bars
- B160 Cold Rolled Bars
- ASME SB160 Forged Bars
- B160 Continuous Cast Bars
- B160 Annealed Bars
- B160 Normalized Bars
- B160 Quenched & Tempered Bars
- ASME SB160 Hardened & Tempered Bars
- B160 Black Bars
- B160 Bright Bars
- B160 Peeled Bars
- B160 Grinded Machined Bars
- ASME SB160 Rolled Billets
- B160 Hot Rolled Billets
- B160 Annealed Rods
- B160 Cold Rolled Billets
- B160 Forged Billets
- B160 Continuous Cast Billets
- B160 Annealed Billets
- B160 Normalized Billets
- B160 Quenched & Tempered Billets
- ASME SB160 Hardened & Tempered Billets
- B160 Black Billets
- B160 Bright Billets
- B160 Peeled Billets
- B160 Grinded Machined Billets
- B160 Rolled Blooms
- B160 Hot Rolled Blooms
- B160 Cold Rolled Blooms
- ASME SB160 Forged Blooms
- B160 Continuous Cast Blooms
- B160 Annealed Blooms
- ASME SB160 Normalized Blooms
- B160 Quenched & Tempered Blooms
- B160 Hardened & Tempered Blooms
- B160 Black Blooms
- B160 Bright Blooms
- ASME SB160 Peeled Blooms
- B160 Grinded Machined Blooms
- B160 Rolled Rods
- B160 Hot Rolled Rods
- B160 Cold Rolled Rods
- B160 Forged Rods
- B160 Concast Rods
- B160 Normalized Rods
- B160 Flat Block Billets
- B160 Rectangular Billets
- B160 Hexagonal Billets
- B160 Hollow Billets
- ASME SB160 Hollow Ring Billets
- B160 Circular Billets
- B160 Round Blooms
- B160 Flat Blooms
- B160 Square Blooms
- B160 Round Corner Square Blooms
- B160 Flat Block Blooms
- B160 Rectangular Blooms
- B160 Hexagonal Blooms
- B160 Hollow Blooms
- B160 Hollow Ring Blooms
- ASME SB160 Circular Blooms
- B160 Hollow Ring Bars
- B160 Circular Bars
- B160 Round Rods
- B160 Flat Rods
- B160 Square Rods
- ASME SB160 Round Corner Square Rods
- B160 Flat Block Rods
- B160 Rectangular Rods
- B160 Hexagonal Rods
- B160 Hollow Rods
- B160 Hollow Ring Rods
- B160 Circular Rods
- ASME SB160 Round Billets
- B160 Flat Billets
- B160 Square Billets
- B160 Round Corner Square Billets
- B160 Hollow Bars
- ASME SB160 Quenched & Tempered Rods
- B160 Hardened & Tempered Rods
- B160 Black Rods
- B160 Bright Rods
- B160 Peeled Rods
- B160 Grinded Machined Rods
- ASME SB160 Round Bars
- B160 Flat Bars
- B160 Square Bars
- B160 Round Corner Square Bars
- B160 Flat Block Bars
- B160 Rectangular Bars
- B160 Hexagonal Bars supplier
Pipe, Tube & Tubing
Sheet, Plate
Round Bar & fasteners