ASTM A307 Bolts

Manufacturer, Supplier and Exporter of ASTM A307 Bolts, ASTM A307 Anchor Bolt, ASTM A307 Flange Bolt, ASTM A307 Tap Bolt, ASTM A307 Lag Bolt

A307 Grade A Bolts, ASTM A307 Studs, ASTM A307 Carbon Steel Bolts, ASTM A 307 Hex Bolts, ASTM A307 Threaded Rods Exporter in India

ASTM A307 - 14e1

ASTM A307 is a Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

ASTM A307 specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in specified sizes. However Grade C has been replaced by another specification under ASTM F1554 Grade 36. ASTM A307 specification does not cover the requirements for machine screws, thread cutting / forming screws, mechanical expansion anchors, or other similar externally threaded fasteners. When tested, sampled specimens shall adhere to specified values for chemical composition, hardness, tensile strength, yield point, elongation, and dimensions. These ASTM A307 bolts are designed, manufactured and tested to comply with the standards set by ASTM A307 for chemical composition, hardness, tensile strength, yield point, elongation, and dimensional accuracy.

An ASTM designation number identifies a unique version of an ASTM standard.

A307 - 14e1

A = ferrous metals;

307 = assigned sequential number

14 = year of original adoption (or, in the case of revision, the year of last revision)

e1 = indicates editorial change

ASTM A307 Grades

  • ASTM A307 Grade A – headed bolts, threaded rods and bent bolts with a minimum tensile strength of 60 ksi for a wide range of general-purpose applications.
  • ASTM A307 Grade B - heavy hex bolts and studs with a tensile strength of 60 to 100 ksi for flanged joints in piping systems with cast iron flanges.
ASTM A307 Bolts

ASTM A307 bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. ASTM A307 Hex Bolts and ASTM A307 Hex Head Bolts is some of the toughest fasteners. These ASME SA307 sturdy fasteners are used to connect heavy materials.

Steel Tubes India is a leading manufacturer & stockist of ASTM A307 Long Bolts and ASME SA307 12 Point Bolts in India. Bolts are externally threaded fasteners used in industrial and construction applications for assembling two unthreaded products together and available in hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. We are manufacturer & supplier of ASTM A307 studs such as All-Thread, Tap-End, Double-End Studs, and Combination Studs, different types of nuts such as Hex Nuts, Heavy Hex Nuts, Overtapped Nuts, Tommy Hole Nuts, Spherical-Faced Nuts and Full Threaded Rods, full thread rods, bonnet bolts, Carriage Bolt in a variety of finishes and sizes from 1/2" to 3 1/2". In the petroleum and chemical industry the fully threaded stud is the most common ASTM A307 Bolt used for flanged connections. ASTM A307 Stud bolts are available in all thread pitches (UNC/UNRC – UNF/UNRF – 8UN) diameters and metric sizes. Steel Tubes India has the capability to thread and manufacture specials from round bar to the customers drawings.

ASTM A307 Hex Cap Screws- also known as machine bolts or hex bolts are available in various bolt grade markings and strengths. Our ASTM A307 Nut Bolts Hex Bolts, Tab Bolts, Flange Bolts, Carriage Bolts, Shoulder Bolts and T Head Bolts are used to attach machine threaded fasteners when joining materials together.

Many of the ASTM A307 Flange Bolts We produce for more critical high specification Superalloys in our Mumbai Factory. We also manufacture a wide range of the non-favoured thread forms such as BSW BSF UNC & UNF, we are finding the biggest call is now for Metric Hexagon Bolts that are modified versions of existing international standards or indeed custom bespoke bolting manufactured to Customer or OEM Drawings.

Is your requirement for a small ASTM A307 fastener or large machined fastener? We will manufacture to your specifications and requirements. These Bolts can range in inch sizes from 1/4-20 through 1-8 (coarse thread) and 1/4-28 through 1-14 (fine thread). Bolts can range in metric sizes from M6-1.0 through M24-3 (coarse thread) and M6-0.75 through M24-1.5 (fine thread).

Looking to buy Inconel 718 Bolts? Inconel 718 Stud Bolt?

Check Today's price of Inconel 718 Bolts in India

Inconel 718 Bolts supplier


ASTM A307 Specification

ASTM A307 Bolt Type ASTM A307 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch #0000 -3" (customized sizes available)
Metric M1.6 - M48
Length Customized Length
Grade Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel, 718 Bolts, Hastelloy, Monel), Titanium, Exotic Metals, Other
Method Cold forming, Hot Forging, Wire Forming
Fastener Standards ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters M6 to M36
Certification Dual Certified As per ASTM & ASME Codes

ASME SA307 Bolts stockist in India- ASME, DIN, AS, BS

ASTM A307 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Manufacturer of ASTM A307 60 000 PSI Tensile Strength Bolts, A307 Socket Head Cap Bolts, ASTM A307 Heavy Hex Bolts in Mumbai, India. ASTM A307 Grade B Bolts, ASTM A307 Square Bolts suppliers, ASTM A307 Carbon Steel Studs, ASTM A307 Hex Headed Bolts manufacturers

ASTM A307 Grades

Grade A Hex Headed Bolts, studs and threaded rods or any other bolting having a minimum tensile strength of 60 ksi, intended for general purpose applications.
Grade B Hex Headed Bolts, studs, and threaded rods or any other bolting having a tensile strength of 60 to 100 ksi and intended for flanged joints in piping systems.

ASTM A307 Chemical Properties

Element Grade A Grade B
Carbon, max 0.29% 0.29%
Manganese, max 1.20% 1.20%
Phosphorus, max 0.04% 0.04%
Sulfur, max 0.15% 0.05%

ASTM A307 Mechanical Properties

Grade Tensile, ksi Yield, min, ksi Elong %, min
A 60 min - 18
B 60 – 100 - 18
C* 58 – 80 36 23

Recommended nuts and washers

Bolt Nut Washer
Grade A - 1/4 inch to 11/2 inches A563A Hex F844
Grade A - 11/2 inches to 4 inches A563A Heavy hex F844
Grade B - 1/4 inch to 4 inches A563A Heavy hex F844
  • ASTM A307 Bolts
  • ASTM A307 Carbon Steel Bolts
  • ASME A307 Carbon Steel Screws
  • ASTM A307 Hex Headed Bolts
  • ASTM A307 Heavy Hex Bolts Exporter in India
  • A307 Studs Supplier
  • ASME A307 Bolts manufacturers
  • ASTM A307 Threaded Rods
  • ASTM A307 Hex Head Bolts Manufacturer
  • ASTM A307 Hexagon Head Screw manufacturers
  • ASTM A307 Studbolts Supplier
  • ASTM A307 Grade A Bolts Distributor
  • ASTM A307 Grade B Bolts Price in India
  • ASTM A307 Carbon Steel studs Stockholder
  • A307M Carbon Steel Threaded Rods Manufacturer
  • ASTM A307M 60000 PSI Tensile Strength

1. Scope

1.1 This specification covers the chemical and mechanical requirements of two grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade” denoting tensile strength and intended use, as follows:

Grade Description
Grade A Bolts, studs, and threaded rod having a minimum tensile strength of 60 ksi and intended for general applications,
Grade B Bolts, studs, and threaded rodA having a tensile strength of 60 to 100 ksi and intended for flanged joints in piping systems with cast iron flanges, and
Grade C Replaced by Specification F1554 Gr.36

(A) Threaded rod is not usually produced to Grade B, but can be when specified by the purchaser.
1.2 This specification does not cover requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors or similar externally threaded fasteners.

1.3 Suitable nuts are covered in Specification A563. Unless otherwise specified, the grade and style of nut for each grade of fastener, of all surface finishes, shall be as follows:

Fastener Grade and Size Nut Grade and StyleA
      A 1/4 to 11/2 in.     A, hex
      A over 11/2 to 4 in.     A, heavy hex
      B, 1/4 to 4 in.     A, heavy hex

(A) Nuts of other grades and styles having specified proof load stresses (Specification A563, Table 3) greater than the specified grade and style of nut are also suitable.
1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 Supplementary Requirement S1 of an optional nature is provided, which describes additional restrictions to be applied when bolts are to be welded. It shall apply only when specified in the inquiry, order, and contract.

1.6 Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

PTFE coated bolts

Industries & Solutions


Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners

Trademark Notice

Aircraft Materials & Aerospace Materials Specialist