ASTM A276 Round Bar

Manufacturer, Supplier and Exporter of ASTM A276 Hex Bar, SS ASME SA 276 Rod and Black bars

The specification of ASTM A276, includes ASTM A276 Round Bar, cold-finished Stainless Steel bars and hot-finished Stainless Steel bars, but does not include bars that are reforged. Included in this category are hexagons, squares and rounds or extruded and hot-rolled shapes of the kind of tees and angles. Round bars of Super Duplex 2507 and Duplex Steel 2205 are used in aircraft engines, fasteners, subservice safety valves, mandrels, thrust reversers, tubing materials, gas turbines, industrial fasteners, etc. Duplex S31803/S32205 has WERKSTOFF NR. 1.4462 and UNS S31803 / S32205. The Melting Point of Duplex S31803/S32205 is 2588 – 2669 °F (1420 – 1465 °C). Duplex S31803 / S32205 has a
Density of 0.285 lb/in3 (7.805 g/cm 3.) 

Duplex Round Bar is composed of nickel-chromium alloy and to this have been added small quantities of aluminum, columbium, molybdenum, titanium and iron. astm a276 type 410 Round Bar show excellent resistance to corrosion, they are treatable by heat, they have good weldability, they have high strength properties and they also display excellent formability. astm a276 type 316 Round Bar has very good heat and cryogenic ranges. These round bars are wear & tear resilient, they have excellent tensile strength and they are also rust free.

We, Steel Tubes India, are manufacturers and suppliers of Stainless Steel Round Bar and these can be procured from us in thicknesses of 100 - 6000 mm length and diameter of 6 mm – 350 mm. These SS astm a276 type 304 Round Bar are obtainable from us in lengths of 1 - 6 Meters or they can also be supplied in Custom Cut Lengths, based upon the specific needs of clients. We stock these round bars of stainless steel in sizes of 6 mm - 120 mm and in finishes such as Rough Turned, Black, Matt Finish, Bright Polished, BA Finish and NO. 4 Finish.

These round bars of ASTM A276 material, are available with us in specifications like ASME SA276 and ASTM A276 and in forms such as Rectangle, Forging, Round, Ingot, Hex (A/F), Square, Billet, Etc. The tolerance of these astm a276 uns s31803 round bars that are available with us is +/-0.2 mm and they can be obtained from us in dimensions such as ASME, DIN, EN, BS, JIS, AISI and ASTM. If you happen to be hunting for the highest quality astm a276 material Round Bars, at the best prices, be sure to call us, you won’t regret it.

Distributor of ASTM A276 Welding Rod, ASME SA276 Rectangular Bar, Square bar, Bright Threaded Bar, Billet/ Ingot, Flat Bar, Shaft, and A276 Hollow Bar Stockist. Check A276 Forged Bar Price in India

ASTM A276 / A276M - 17

ASTM A276 is a Standard Specification for Stainless Steel Bars and Shapes

ASTM A276 specification covers hot-finished or cold-finished bars except bars for reforging. It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. ASTM A276 bars shall be furnished in one of the following conditions: Condition A in which the bars are annealed, Condition H in which the bars are hardened and tempered at a relative temperature, Condition T in which the bars are hardened and tempered at a relatively high temperature, Condition S in which the bars are strain hardened or relatively light cold worked, and Condition B in which the bars are relatively severe cold worked. ASTM A276 material shall be subjected to a mechanical test to determine its tensile strength, yield strength, elongation, and Brinell hardness.

reference: https://www.astm.org/

Looking to buy Alloy 600 Round Bar? Inconel 600 Round Bar?

Check Today's price of Inconel 600 Round Bar in India

Inconel 600 Round Bar supplier

       

Scope

1.1 ASTM A276 specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification.

NOTE 1: For bars for reforging, see Specification A314.

NOTE 2: For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M.

Forms available of ASTM A276 Bars:

ASTM A276 Bar ASME SA276 Rod
A276 Square Bar A276 Black bars
A276 Threaded Bar A276 Rectangular Bar
A276 Bright Bar A276 Rounds
A276 Billet ASME SA276 Unpolished Round Bar
A276 Cold Finish Bar Round Bar A276 Half Round Bar
A276 Cold Finished Round Bar A276 Hot Rolled Round Bar
A276 Cold Drawn Round Bar A276 Cold Rolled Round Bar
A276 Square Round Bar A276 36" Round Bar
A276 Cold Drawn Round Bar Mill Finish A276 Round Bar
A276 Round Rods A276 Hex Bar
A276 Flat Bar A276 Rod Bar
A276 Ingot supplier ASME SA276 Hollow Bar
A276 Shaft Bar A276 Rectangle Bar
A276 Hollow Round Bar A276 Forged Bar
A276 Extruded Round Bar A276 3 Ft Round Bar
A276 Polished Round Bar ASME SA276 6 Ft Round Bar
A276 UNS N02201 Block ASME SA276 Rods


Trademark Notice

Aircraft Materials & Aerospace Materials Specialist