ASTM A1084 Bolts

Manufacturer, Supplier and Exporter of ASTM A1084 Bolts, ASTM A1084 Anchor Bolt, ASTM A1084 Flange Bolt, ASTM A1084 Tap Bolt, ASTM A1084 Lag Bolt

Buy ASME SA 1084 Hex Bolts, ASTM A1084 Bolts, SA 1084 Square Bolts, DIN SA 1084 Bolts, A1084 DIN 931 Bolts Exporter in India , Check ASTM A1084 Bolts Price in India

ASTM A1084 - 15a

ASTM A1084 is a Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless SteelsASTM A1084 Bolts

ASTM A1084 bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. ASTM A1084 Hex Bolts and ASTM A1084 Hex Head Bolts is some of the toughest fasteners. These ASME SA1084 sturdy fasteners are used to connect heavy materials.

Steel Tubes India is a leading manufacturer & stockist of ASTM A1084 Long Bolts and ASME SA1084 12 Point Bolts in India. Bolts are externally threaded fasteners used in industrial and construction applications for assembling two unthreaded products together and available in hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. We are manufacturer & supplier of ASTM A1084 studs such as All-Thread, Tap-End, Double-End Studs, and Combination Studs, different types of nuts such as Hex Nuts, Heavy Hex Nuts, Overtapped Nuts, Tommy Hole Nuts, Spherical-Faced Nuts and Full Threaded Rods, full thread rods, bonnet bolts, Carriage Bolt in a variety of finishes and sizes from 1/2" to 3 1/2". In the petroleum and chemical industry the fully threaded stud is the most common ASTM A1084 Bolt used for flanged connections. ASTM A1084 Stud bolts are available in all thread pitches (UNC/UNRC – UNF/UNRF – 8UN) diameters and metric sizes. Steel Tubes India has the capability to thread and manufacture specials from round bar to the customers drawings.

ASTM A1084 Hex Cap Screws- also known as machine bolts or hex bolts are available in various bolt grade markings and strengths. Our ASTM A1084 Nut Bolts Hex Bolts, Tab Bolts, Flange Bolts, Carriage Bolts, Shoulder Bolts and T Head Bolts are used to attach machine threaded fasteners when joining materials together.

Many of the ASTM A1084 Flange Bolts We produce for more critical high specification Superalloys in our Mumbai Factory. We also manufacture a wide range of the non-favoured thread forms such as BSW BSF UNC & UNF, we are finding the biggest call is now for Metric Hexagon Bolts that are modified versions of existing international standards or indeed custom bespoke bolting manufactured to Customer or OEM Drawings.

Is your requirement for a small ASTM A1084 fastener or large machined fastener? We will manufacture to your specifications and requirements. These Bolts can range in inch sizes from 1/4-20 through 1-8 (coarse thread) and 1/4-28 through 1-14 (fine thread). Bolts can range in metric sizes from M6-1.0 through M24-3 (coarse thread) and M6-0.75 through M24-1.5 (fine thread).

Looking to buy Inconel 718 Bolts? Inconel 718 Stud Bolt?

Check Today's price of Inconel 718 Bolts in India

Inconel 718 Bolts supplier


ASTM A1084 Specification

ASTM A1084 Bolt Type ASTM A1084 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch #0000 -3" (customized sizes available)
Metric M1.6 - M48
Length Customized Length
Grade Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel, 718 Bolts, Hastelloy, Monel), Titanium, Exotic Metals, Other
Method Cold forming, Hot Forging, Wire Forming
Fastener Standards ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters M6 to M36
Certification Dual Certified As per ASTM & ASME Codes

ASME SA1084 Bolts stockist in India- ASME, DIN, AS, BS

ASTM A1084 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Manufacturer of ASTM A1084 Bolts, A1084 Socket Head Cap Bolts, DIN933 DIN 931 ANSI/ASME B18.2.1 Bolts, ASME B18.2.1, B18.2.3.6M, ASME B18.3 ISO 4762, DIN 912 Bolts Supplier in Mumbai, India. ASTM A1084 DIN 933 Bolts, SA1084 12-Point Bolts, ASTM A1084 Square Bolts, A1084 Hex Bolts manufacturers

1. Scope

1.1 The purpose of this test method is to allow detection of the presence of detrimental chromium-containing phases in selected lean duplex stainless steels to the extent that toughness or corrosion resistance is affected significantly. Such phases can form during manufacture and fabrication of lean duplex products. This test method does not necessarily detect losses of toughness nor corrosion resistance attributable to other causes, nor will it identify the exact type of detrimental phases that caused any loss of toughness or corrosion resistance. The test result is a simple pass/fail statement.

1.2 Lean duplex (austenitic-ferritic) stainless steels are typically duplex stainless steels composed of 30 to 70 % ferrite content with a typical alloy composition having Cr > 17 % and Mo < 1 % and with additions of Nickel, Manganese, Nitrogen and controlled low carbon content as well as other alloying elements. This standard test method applies only to those alloys listed in Table 1. Similar test methods for some higher alloyed duplex stainless steels are described in Test Methods A923, but the procedures described in this standard differ significantly for all three methods from the ones described in Test Methods A923.

1.3 Lean duplex stainless steels are susceptible to the formation of detrimental chromium-containing compounds such as nitrides and carbides and other undesirable phases. Typically this occurs during exposures in the temperature range from approximately 300 to 955°C (570 to 1750ºF) with a maximum susceptibility in the temperature range around 650 to 750°C (1200 to 1385ºF). The speed of these precipitation reactions is a function of composition and the thermal or thermo-mechanical history of each individual piece. The presence of an amount of these phases can be detrimental to toughness and corrosion resistance.

1.4 Because of the low molybdenum content, lean duplex stainless steels only exhibit a minor susceptibility to sigma or BEST PRICE ! READY STOCK OF molybdenum containing intermetallic phases. Heat treatment, that could lead to formation of small amounts of molybdenum containing intermetallics, would result in a large amount of precipitation of detrimental nitrides or carbides, long before any signs of sigma and similar phases would be observed.

1.5 Correct heat treatment of lean duplex stainless steels can eliminate or reduce the amount and alter the characteristics of these detrimental phases as well as minimizing Cr-depletion in the matrix phase in the immediate vicinity of these phases. Adequately rapid cooling of the product from a suitable annealing temperature provides the maximum resistance to formation of detrimental phases by subsequent thermal exposures. For details of the proper annealing temperature recommendations for the alloy and product in question, the user is referred to the relevant applicable ASTM product specification.

1.6 Compliance with the chemical and mechanical requirements for the applicable product specification does not necessarily indicate the absence of detrimental phases in the product.

1.7 These test methods include the following:

1.7.1 Test Method A—Etch Method for detecting the presence of potentially detrimental phases in Lean Duplex Stainless Steels

1.7.2 Test Method B—Charpy V-notch Impact Test for determining the presence of detrimental phases in Lean Duplex Stainless Steels.

1.7.3 Test Method C—Inhibited Ferric Chloride Corrosion Test for determining the presence of detrimental phases in Lean Duplex Stainless Steels.

1.7.4 Examples of the correlation of thermal exposures, the occurrence of detrimental phases, and the degradation of toughness and corrosion resistance are given in Appendix X2, Appendix X3, and the References.

1.8 Guidelines for the required data needed for subcommittee A01.14 to consider listing a lean duplex stainless steel in this standard test method are given in Annex A1.

1.9 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are provided for information only and are not considered standard

  • ASTM Bolts Manufacturer
  • A1084 Bolts
  • ASME B18.2.3.6M A1084 Eye Bolts manufacturers
  • ASTM A1084 Eye Bolts Exporter in India
  • Allen Eye Bolts Supplier
  • Alloy Steel Socket Hexagon Head Bolts Anchor Bolt Supplier
  • A1084 Bolts
  • ASTM A1084 Exporter in India
  • ASTM A1084 Bolts Price in India
  • ASTM A1084 Socket Head Cap Bolts Exporter in India
  • ASTM A1084 DIN 934 Eye Bolts
  • UNS A1084 Eye Bolts Manufacturer
  • ASME B18.2.4.6M Bolts
  • UNS A1084 Eye Bolts
  • Bolts Distributor
  • DIN933 DIN 931 ANSI Eye Bolts Stockholder
  • ASTM A1084 Fasteners
  • ASTM A1084 Bolts
  • ASTM A1084 Stud Bolts manufacturers
  • A1084 Hex Head Bolts Supplier

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

PTFE coated bolts

Industries & Solutions


Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners

Trademark Notice

Aircraft Materials & Aerospace Materials Specialist