Alloy 20 Sheet Suppliers
Alloy 20 Plate, Carpenter 20 Cb-3 Coil Suppliers in India
Buy Carpenter 20 Material Sheets, SB 463 UNS N08020 Plate, 2.4660 Alloy 20 Sheet at best price in Mumbai, India

Alloy 20 Plate

Alloy 20 Sheet

Alloy 20 Coil
Alloy 20 Plate is an austenitic stainless steel developed for applications involving sulfuric acid. Incoloy 20 Plate is an austenitic nickel-iron-chromium based alloy with additions of copper and molybdenum. Alloy 20 Clad Plate's nickel content aids in its chloride ion stress and corrosion resistance. hot rolled Alloy 20 Shim is designated as UNS N08020 and Werkstoff Number 2.4660. Alloy 20 Sheet also known as CN7M Plate, Carpenter 20 Plate, CB-3 Plate, AL 20 Plate, Carlson Alloy C20 Plate, Nickelvac 23 Plate, Nicrofer 3620 Nb Plate and VDM® Alloy 20 Plate. Alloy 20 Cold treated plate, Alloy 20 hot rolled plate, Alloy 20 Coil, Alloy 20 Flat Sheet, Alloy 20 Rolling Plate & Alloy 20 strip can be cold formed by standards methods.
Looking for best price of cold rolled Alloy 20 Rolling Sheets in India? We have no minimum footage requirements. We will supply the exact amount of Alloy 20 Coil you require even if it’s small quantity of Carpenter 20 Cb-3 Plates. Contact Steel Tubes India- the right supplier of Carpenter 20 Material Sheets near you.
Steel Tubes India offers one of the widest ranges of Incoloy® alloy 20 sheet and Incoloy® alloy 20 plate in various qualities, sizes and grades which are equivalent to Inconel Alloy 20 Sheet & Alloy 20 Plate (2mm to 12mm). Alloy 20 Sheet is available in thicknesses ranging from .016 to .156". Large size UNS N08020 Material Sheet will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size UNS N08020 Sheet, thin and ultra-thin gauge Carpenter 20 strip and foil products, rolled down to 2 microns.
Impact on Alloy 20 Plate in Seawater
Impact on alloy 20 plate in seawater is none, as SB 463 UNS N08020 Plate display superb resistance to corrosion from sea water. 2.4660 Alloy 20 Sheet also offer very good resistance to hot sulfuric acid. Fact is, 2.4660 Alloy Plate has been specifically designed to withstand the effects of sulfuric acid, because Niobium, Molybdenum and Copper have been added to it. Carpenter Alloy 20cb3 Plate also show very good resistance to chloride stress corrosion cracking. In the as-welded condition, Alloy 20 plates are resistant to intergranular corrosion.
Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Alloy 20 UNS N08020 Strip in uniformly of excellent quality. We apply the process of surface finishing to our Alloy 20 Polished Plate by pickling or buff-polishing. Alloy 20 Strips levels of finishing & cut can be adjusted according to your requirements. ASTM B463 Alloy 20 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Alloy 20 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of ASTM B 463 N08020 Plate based on dimensions and shape. Alloy 20 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.
Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of Alloy 20 plates in shortest time as well at best price, because we maintain Incoloy Alloy 20 Plate in stock for sale, so it saves time & cost to procure any size range in Bright annealed Alloy 20 sheet from any other vendor or Manufacturer of mirror finish Alloy 20 Plate in India.
Suppliers of Alloy 20 Clad Plate in Mumbai, India
Looking to buy Inconel Plate? Inconel Sheet?
Check price of Inconel Plate in India

Alloy 20 Plate Price
Alloy 20 Sheet Price List
Alloy 20 Sheet Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Alloy 20 Sheet Price in India | Indian | Rs 1300/- | $18 | €16 | Cut to Size |
Alloy 20 Sheet Price in Japan | Japanese | Rs 1600/- | $24 | €20 | Fix Length |
Alloy 20 Sheet Price in UK / Europe | European | Rs 1750/- | $26 | €22 | Fix Length |
Alloy 20 Sheet Price in USA | USA | Rs 1800/- | $27 | €23 | Fix Length |
Please note: Price is subject to change without any prior notice.
Alloy 20 Plate Specification
Alloy 20 Sheet ASTM Specification | ASTM B463 UNS N08020, ASME SB463, MSRR, AMS, BS |
---|---|
Incoloy® alloy 20 Plate Specification | MSRR, AMS, BS, ASTM B463 / ASME SB463 |
Alloy 20 Plate Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available |
Alloy 20 Plate Thickness | 0.1mm to 100 mm Thk |
Alloy 20 Plate Width | 10-2500mm |
Alloy 20 Sheet AMS | AMS |
Alloy 20 Sheet Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Temper | Annealed |
Condition | Polished on both sides |
Alloy 20 Plate Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Alloy 20 Plate Stock in form of | Alloy 20 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
High Quality Alloy 20 Sheet |
|
Alloy 20 profiling | To provide a full profiling service we use numerous profiling methods including:
|
Specialized in |
|
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Stock of Alloy 20 Plate

Alloy 20 2B Sheet

Decorative 8K Mirror Alloy 20 Sheet

Hairline Alloy 20 Sheet

No.4 Alloy 20 Sheet

Alloy 20 Plate

Alloy 20 Sheet

Alloy 20 Coil

Alloy 20 Clad Plate

Alloy 20 Strips

Alloy 20 Shim Stock

Alloy 20 Rolling Sheets

Alloy 20 Flat Sheet

Alloy 20 Rolling Plate

Alloy 20 Flat Shim

Alloy 20 Perforated Plate

Alloy 20 Polished Plate

Alloy 20 cold rolled sheet

Alloy 20 hot rolled plate

Incoloy® alloy 20 Plate

Incoloy® alloy 20 Sheet

Alloy 20 Quarto Plate

Alloy 20 Precision Strip

Incoloy® alloy 20 Cold Rolled Coil, Strip And Sheet

Incoloy® alloy 20 Hot Rolled Coil, Strip And Plate
Difference between Alloy 20 Sheet, Plate & Foil
Here are few points to recognised sheet, plate or foil:
If thickness greater than 6.35 mm is called a Alloy 20 Plate.
If thickness greater than 0.15 mm and less than 6.35mm is called a Alloy 20 Sheet.
If thickness less than 0.15mm is then its a Alloy 20 Foil.
Alloy 20 Plate Properties
Alloy 20 Plate mechanical properties
Alloy 20 Plate, Sheet & Coil Chemical Composition
Grade | C | Mn | Si | S | Cu | Ni | Cr | Fe | Mo | P |
Alloy 20 | 0.07 max | 2.00 max | 1.00 max | 0.035 max | 3.0-4.0 | 32.0-38.0 | 19.0-21.0 | 29.85 min* | 2.0-3.0 | 0.045 max |
Alloy 20 Sheets, Plates & Coils Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.1 g/cm3 | 1443 °C (2430 °F) | Psi -80,000, MPa -551 | Psi – 35,000, MPa – 241 | 30% |
Equivalent Grades for 20 Alloy Sheets & Plates
STANDARD | WERKSTOFF NR. | UNS | AFNOR | EN |
Alloy 20 | 2.4660 | N08020 | Z2NCUD31-20AZ | NiCr20CuMo |
Inconel Alloy 20 Sheet Sizes
Sizes in Inches | Sizes in mm |
---|---|
.125" | 3.18 |
.134" | 3.40 |
.156" | 3.96 |
.187" | 4.75 |
.250" | 6.35 |
.312" | 7.92 |
.375" | 9.53 |
.500" | 12.7 |
.625" | 15.9 |
.750" | 19.1 |
.875" | 22.2 |
1" | 25.4 |
1.125" | 28.6 |
1.250" | 31.8 |
1.500" | 38.1 |
1.750" | 44.5 |
2" | 50.8 |
2.500" | 63.5 |
3" | 76.2 |
Metric Dimensions
Surface finish | Thickness (mm) | Width (mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions
Surface finish | Gauge (in) | Width (in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |
An estimated delivery time location wise for Alloy 20 Plate
Country | Days | Country | Days |
---|---|---|---|
USA | 45 | Canada | 45 |
Australia | 30 | UK | 35 |
Malaysia | 15 | Poland | 15 |
Iran | 7 | Singapore | 14 |
Vietnam | 20 | Albania | 20 |
UAE | 15 | Thailand | 20 |
Nigeria | 40 | Ethiopia | 40 |
Turkey | 30 | Tanzania | 30 |
Bahrain | 15 | Kenya | 40 |
Libya | 40 | Syria | 40 |
Zambia | 40 | Egypt | 40 |
Italy | 40 | India | 7 |
Saudi Arabia | 15 | Qatar | 15 |
Namibia | 40 | Indonesia | 20 |
South Africa | 40 | Australia | 40 |
Uganda | 40 | Angola | 40 |
Kazakhstan | 20 | Algeria | 20 |