Al6xn Plate Suppliers

SB 688 UNS N08367 Plate, Al6xn Stainless Steel Plate exporter in India

Dealers & distributor of UNS N08367 Al6xn Plate, UNS N08367 Alloy Plate, AL6XN Polished Plate, AL-6XN Alloy strip in Mumbai, India

AL6XN Plate
AL6XN Plate
AL6XN Sheet
AL6XN Sheet
AL6XN Coil
AL6XN Coil

AL6XN Plate (UNS N08367) is a “super-austenitic” low carbon stainless steel. AL6XN Shim has 6.3% molybdenum. In comparison you will find that AL6XN Rolling Sheets is 50% stronger than stainless steel tube. AL6XN Sheet is stable to 1000°F. AL6XN Flat Shim exhibits excellent corrosion resistance to oxidizing environments, various acids, alkali, salt solution, seawater, crevice, stress, and overall general corrosion. SB 688 UNS N08367 are mainly used in pharmaceutical, marine, oil and gas, food, and chemical processing equipment. The high strength and corrosion resistance of the UNS N08367 Plate make it a better choice than the conventional duplex stainless steel tube and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential. AL-6XN is a registered trademark of ATI Properties, Inc.

Steel Tubes India is supplier & exporter of UNS N08367 Al6xn Plate. We stock AL6XN Clad Plates at best price, compare price of Hot rolled AL6XN Sheet & Plate with supplier of AL6XN Cold rolled Plate & Sheet in china.

Steel Tubes India offers one of the widest ranges of AL6XN sheet and AL6XN plate in various qualities, sizes and grades which are equivalent to AL6XN Sheet & AL6XN Plate (2mm to 12mm). UNS N08367 Alloy Plate is available in thicknesses ranging from .016 to .156". Large size AL6XN Plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size AL6XN Sheets, thin and ultra-thin gauge AL-6XN Alloy strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Al6xn Stainless Steel Plate in uniformly of excellent quality. We apply the process of surface finishing to our AL6XN Polished Plate by pickling or buff-polishing. AL6XN Strips levels of finishing & cut can be adjusted according to your requirements. AL6XN Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The AL6XN Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of AL6XN plates based on dimensions and shape. AL6XN Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of AL6XN plates in shortest time as well at best price, because we maintain AL6XN Sheet in stock for sale, so it saves time & cost to procure any size range in Bright annealed AL6XN sheet from any other vendor or Manufacturer of mirror finish AL6XN Plate in India.

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

Inconel Plate

 

AL6XN Plate Price

AL6XN Sheet Price List

Al6XN Sheet Price Origin Price in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Others
Al6XN Sheet Price in India Indian Rs 800/- $11 €9 Cut to Size
Al6XN Sheet Price in Japan Japanese Rs 950/- $14 €12 Fix Length
Al6XN Sheet Price in UK / Europe European Rs 1150/- $17 €15 Fix Length
Al6XN Sheet Price in USA USA Rs 1300/- $19 €17 Fix Length

Please note: Price is subject to change without any prior notice.

SB 688 UNS N08367 Specification

AL6XN Sheets Plates
  • Hot rolled AL6XN Sheet & Plate
  • AL6XN Cold rolled Plate & Sheet
ASTM Specification ASTM B688
Al6xn Stainless Steel PlateSpecification MSRR, AMS, BS, ASTM B688 / ASME SB688
Al6xn Stainless Steel PlateLength & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
Al6xn Stainless Steel PlateThickness 0.1mm to 100 mm Thk
Al6xn Stainless Steel PlateWidth 10-2500mm
AL6XN Sheet AMS AMS
AL6XN Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Al6xn Stainless Steel PlateFinish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Al6xn Stainless Steel PlateStock in form of AL6XN Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality AL6XN Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished AL6XN Plate
AL6XN profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • AL6XN Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • AL6XN Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • AL6XN Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • AL6XN Clad plate: AL6XN Clad plate is a composite steel plate made by bonding AL6XN plate, etc.
  • Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Types of AL6XN Plate

AL6XN 2B Sheet
AL6XN 2B Sheet
Decorative 8K Mirror AL6XN Sheet
Decorative 8K Mirror AL6XN Sheet
Hairline AL6XN Sheet
Hairline AL6XN Sheet
No.4 AL6XN Sheet
No.4 AL6XN Sheet
AL6XN Plate
AL6XN Plate
AL6XN Sheet
AL6XN Sheet
AL6XN Coil
AL6XN Coil
AL6XN Clad Plate
AL6XN Clad Plate
AL6XN Strips
AL6XN Strips
AL6XN Shim Stock
AL6XN Shim Stock
AL6XN Rolling Sheets
AL6XN Rolling Sheets
AL6XN Flat Sheet
AL6XN Flat Sheet
AL6XN Rolling Plate
AL6XN Rolling Plate
AL6XN Flat Shim
AL6XN Flat Shim
AL6XN Perforated Plate
AL6XN Perforated Plate
AL6XN Polished Plate
AL6XN Polished Plate
AL6XN cold rolled sheet
AL6XN cold rolled sheet
AL6XN hot rolled plate
AL6XN hot rolled plate
AL6XN Plate
AL6XN Plate
AL6XN Sheet
AL6XN Sheet
AL6XN Quarto Plate
AL6XN Quarto Plate
AL6XN Precision Strip
AL6XN Precision Strip
AL6XN Cold Rolled Coil, Strip And Sheet
AL6XN Cold Rolled Coil, Strip And Sheet
AL6XN Hot Rolled Coil, Strip And Plate
AL6XN Hot Rolled Coil, Strip And Plate

Difference between AL6XN Sheet, Plate & Foil

AL6XN Sheet, Plate and Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a AL6XN Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a AL6XN Sheet.

If thickness less than 0.15mm is then its a AL6XN Foil.

UNS N08367 Al6xn Plate Sizes

SIZE in Inches SIZE in mm
.125" 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" 4.75mm
.250" 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" 12.7mm
.625" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm


AL6XN Plate Properties

AL6XN Plate mechanical properties

AL6XN Plate mechanical properties

SSC-6MO / AL6XN Plate & Sheet Equivalent Grades

STANDARD WERKSTOFF NR. UNS
SSC-6MO / AL6XN - N08367

SSC-6MO / AL6XN Sheet, Plate & Coil Chemical Composition

Grade C Mn P S Si Ni Cr Fe N Cu Mo
SSC-6MO / AL6XN .03 max 2.0 max .04 max .03 max 1.0 max 23.5 - 25.5 20.0 -22.0 Bal .18 - .25 .75 max 6.0 - 7.0

Mechanical Properties of AL6XN® (AL6XN / UNS N08367) Super-Austenitic Stainless Steel Plate & Sheet

Representative Tensile and Impact Properties, Plate

Temp. °F (°C)

Ult. Tensile Strength, psi

.2% Yield Strength, psi

Elongation in 2”, percent

Charpy V-Notch Toughness, ft-lb

-450 (-268)

218,000

142,000

36

353*

-320 (-196)

196,000

107,000

49

85

-200 (-129)

-

-

-

100

70 (21)

108,000

53,000

47

140

200 (93)

99,900

49,400

47

-

400 (204)

903,000

40,400

46

-

600 (316)

86,000

36,300

47

-

800 (427)

87,000

36,000

48

-


STOCKED SIZES
SIZE ALLOY SIZE
AL6XN
.125" X 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" X 4.75mm
.250" X 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" X 12.7mm
.625" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" X 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm

An estimated delivery time location wise for SB 688 UNS N08367 material

Country Days Country Days
USA 45 Canada 45
Australia 30 UK 35
Malaysia 15 Poland 15
Iran 7 Singapore 14
Vietnam 20 Albania 20
UAE 15 Thailand 20
Nigeria 40 Ethiopia 40
Turkey 30 Tanzania 30
Bahrain 15 Kenya 40
Libya 40 Syria 40
Zambia 40 Egypt 40
Italy 40 India 7
Saudi Arabia 15 Qatar 15
Namibia 40 Indonesia 20
South Africa 40 Australia 40
Uganda 40 Angola 40
Kazakhstan 20 Algeria 20
SB 688 UNS N08367 Al6xn Plate suppliers

UNS N08367 Al6xn Sheet exporter in India