254 SMO Stainless Steel Sheet

6MO Plate, SMO 254 Plate suppliers in India

Buy 254 SMO Sheet, UNS S31254 Plate, 1.4547 Plate, 254 SMO Coil at best price in Mumbai, India

Stainless steel grade 254 SMO Stainless Steel Plate is a very high end austenitic stainless steel. Since the 254 SMO Sheet is intended for use under severe corrosive conditions, welding must be carried out with care and followed by thorough cleaning to ensure that the weld metal and the heat-affected zone maintain the best possible corrosion properties. Remember that Alloy 254 SMO Plate the heat input during welding should not exceed 1.5 kJ/mm, and in multi-pass welding the interpass temperature should not exceed 100°C (210°F). The welding of fully austenitic steel SMO 254 Plate usually entails a risk of hot-cracking in the weld metal, particularly if the weldment is under constraint but as our 254 SMO Coil has a very high degree of purity, then the risk of this type of cracking is greatly reduced. Alloy 254 SMO (UNS S31254) in 254 SMO Clad Plate, 254 SMO Shim, 254 SMO Rolling Sheets, 254 SMO Flat Sheet is designated as UNS S31254 and Werkstoff Number 1.4547.

Looking for best price of 254 SMO Flat Shim in India? We have no minimum footage requirements. We will supply the exact amount of 254 SMO Perforated Plate you require even if it’s small quantity of 254 SMO Hot rolled Plate. Contact Steel Tubes India- the right supplier of 254 SMO Cold rolled Plate near you.

Steel Tubes India offers one of the widest ranges of SMO 254 sheet and SMO 254 plate in various qualities, sizes and grades which are equivalent to 254 SMO Sheet & 254 SMO Plate (2mm to 12mm). 254 SMO Sheet is available in thicknesses ranging from .016 to .156". Large size 254 SMO plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size 254 SMO Sheets, thin and ultra-thin gauge Alloy 254 SMO strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of UNS S31254 Plate in uniformly of excellent quality. We apply the process of surface finishing to our 254 SMO Polished Plate by pickling or buff-polishing. 254 SMO Strips levels of finishing & cut can be adjusted according to your requirements. 254 SMO Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The 254 SMO Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of 254 SMO plates based on dimensions and shape. 254 SMO Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Our Dealers & Distributors in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada, UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran, Indonesia & Australia arrange complete range of 254 SMO plates in shortest time as well at best price, because we maintain 254 SMO Sheet in stock for sale, so it saves time & cost to procure any size range in 1.4547 Plate from any other vendor or Manufacturer of mirror finish 254 SMO plate in India.

What is SMO 254 Plate Heat Exchanger?

The answer to what is SMO 254 plate heat exchanger?, is that these are plate exchangers that have the capacity to withstand pitting and higher pressures. Plus, they have an increased surface area per frame and their transfer of heat is better. 6mo Plate heat exchangers have minimal gasket leaks, lesser leaks from pitting and a much longer plate life. SMO 254 plate heat exchangers are used in various industries like food process industry, pharmaceutical industry, hydraulic and industrial processes, etc.

Supplier of Alloy 254 SMO Sheet in Mumbai, India

Looking to buy Inconel Plate? Inconel Sheet?

Check price of Inconel Plate in India

 254 SMO plate Weight Calculator  Project Reference list

254 SMO Plate Price

254 SMO Sheet Price List

ASTM A240 Uns S31254 Sheet Price	Origin	Price in INR (per kg)	Price in USD (per kg)	Price in Euro (per kg)	Others
SA 240 Uns S31254 Sheet Price in India	Indian	Rs 1200/-	$17	€14	Cut to Size
1.4547 Stainless Steel Sheet Price in Japan	Japanese	Rs 1400/-	$21	€18	Fix Length
254 SMO Uns S31254 Sheet Price in UK / Europe	European	Rs 1500/-	$22	€19	Fix Length
254 SMO 1.4547 Sheet Price in USA	USA	Rs 1600/-	$24	€20	Fix Length

Please note: Price is subject to change without any prior notice.

254 SMO 6mo Plates, 254 SMO 6 Moly Sheet & SMO 254 Clad Plate suppliers in India

254 SMO plate Specification

254 SMO Sheet ASTM Specification	ASTM A240 UNS S31254, ASME SA240, Alloy 254 SMO (UNS S31254) in 254 SMO Clad Plate, 254 SMO Shim, 254 SMO Rolling Sheets, 254 SMO Flat Sheet.
SMO 254 Plate Specification	MSRR, AMS, BS, ASTM A240 / ASME SA240
254 SMO Plate Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to size available
254 SMO Plate Thickness	0.1mm to 100 mm Thk
254 SMO Plate Width	10-2500mm
254 SMO Sheet AMS	AMS
254 SMO Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
254 SMO Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
254 SMO Plate Stock in form of	Alloy 254 SMO Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality 254 SMO Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished 254 SMO plate
254 SMO profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	SMO 254 Material Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width SMO 254 Alloy Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width Alloy 254 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width Alloy 254 Stainless Steel Clad plate: 254 SMO Clad plate is a composite steel plate made by bonding 254 SMO plate, etc. Free Quote, Inquiry answered within 24 hours
Steel Tubes India offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

254 SMO Plate, Sheet & Shim Stock

Difference between 254 SMO Sheet, Plate & Foil

Here are few points to recognised sheet, plate or foil:

If thickness greater than 6.35 mm is called a 254 SMO Plate.

If thickness greater than 0.15 mm and less than 6.35mm is called a 254 SMO Sheet.

If thickness less than 0.15mm is then its a 254 SMO Foil.

254 SMO Plate Properties

254 SMO Plate mechanical properties

UNS S31254 6 Mo Plate, Sheet & Coil Chemical Composition

Grade	Ni	Cr	Mo	Cu	N	C	Mn	Si	P	S
SMO 254	17.5-18.5	19.5-20.5	6-6.5	0.5-1.0	0.18-0.22	0.02	1.0	0.08	0.03	0.01

SMO 254 Sheets, Plates & Coils Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1320-1390 ℃	650	300	35 %

Equivalent Grades for 254 SMO Sheets & Plates

STANDARD	WERKSTOFF NR.	UNS	SIS	AFNOR	EN
SMO 254	1.4547	S31254	2378	Z1 CNDU 20.18.06Az	X1CrNiMoCuN20-18-7

Alloy 254 SMO Plate Sizes

Sizes in Inches	Sizes in mm
.125"	3.18
.134"	3.40
.156"	3.96
.187"	4.75
.250"	6.35
.312"	7.92
.375"	9.53
.500"	12.7
.625"	15.9
.750"	19.1
.875"	22.2
1"	25.4
1.125"	28.6
1.250"	31.8
1.500"	38.1
1.750"	44.5
2"	50.8
2.500"	63.5
3"	76.2

Metric Dimensions

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Imperial Dimensions

Surface finish	Gauge (in)	Width (in)
2B – Cold rolled, heat treated, pickled, skin passed	10–24	max. 72*
2D – Cold rolled, heat treated, pickled	12–24	max. 60
BA Mexinox only	18–28	max. 48
Polished (not brushed)	11–24	max. 60
Temper rolled Mexinox only	13–29	max. 48

An estimated delivery time location wise for Alloy 254 Stainless Steel Sheet & Plate

Country	Days	Country	Days
USA	45	Canada	45
Australia	30	UK	35
Malaysia	15	Poland	15
Iran	7	Singapore	14
Vietnam	20	Albania	20
UAE	15	Thailand	20
Nigeria	40	Ethiopia	40
Turkey	30	Tanzania	30
Bahrain	15	Kenya	40
Libya	40	Syria	40
Zambia	40	Egypt	40
Italy	40	India	7
Saudi Arabia	15	Qatar	15
Namibia	40	Indonesia	20
South Africa	40	Australia	40
Uganda	40	Angola	40
Kazakhstan	20	Algeria	20

Alloy 254 Stainless Steel Plate manufacturers in India

---

1.4547 Stainless Steel Coils, 254 SMO Uns S31254 Plate & 254 SMO 6 Moly Sheet exporter in India