Description INCHES   METRIC  
Flanges size Tol. Flange size Tol
Centre to centre of adjacent Bolt holes ½ -24 +0.03
-0.03		 15-600 +0.8
-0.8
Eccentricity between Bolt Circle diameter and Machined facing diameters ½ -2 ½ +0.03
-0.03		 15-65 +0.8
-0.8
3 – 24 +0.06
-0.06		 80-600 +1.6
-1.6

BS 1560 (ANSI B 16.5-1973) PIPE FLANGES
WELDING ENDS FOR WELDING FLANGES
Bevel for wall thickness (t) 0.19 in. (4.8mm) to 0.88 in. (22.2mm) inclusive
Bevel for wall thickness (t) greater than 0.88 in. (22.2mm)
  • A = Nominal outside diameter of pipe
  • B = Nominal inside diameter of pipe
  • t = Nominal wall thickness of pipe
Flanges to connect with stainless steel pipe of nominal wall thickness 1/8'' (3.2mm) or less. The welding ends shall be finished to a slight chamfer.

FLANGES SERRATION
The raised face of flanges 12'' (300mm) N.B. And smaller normally have a continuous serration, which is formed by a 1/16'' (1.6mm) radius tool, at a feed of 1/32'' (0.88mm) per revolution.

The raised face of flanges over 12'' (30gColor='#FFFFFF'; window.mm_menu_0715151605_0 = new Menu("root",157,20,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",4,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0715151605_0.addMenuItem("Carbon Alloy Steel","location='carbon-bar.html'"); mm_menu_0715151605_0.addMenuItem("Stainless Duplex Steel","location='Stainless-bar.html'"); mm_menu_0715151605_0.addMenuItem("Nickel Copper Alloy","location='nickle-bar.html'"); mm_menu_0715151605_0.fontWeight="bold"; mm_menu_0715151605_0.hideOnMouseOut=true; mm_menu_0715151605_0.bgColor='#108FC4'; mm_menu_0715151605_0.menuBorder=1; mm_menu_0715151605_0.menuLiteBgColor='#0E90C4'; mm_menu_0715151605_0.menuBorderBgColor='#FFFFFF'; window.mm_menu_0715151611_0 = new Menu("root",157,20,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",4,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0715151611_0.addMenuItem("Carbon Alloy Steel","location='carbon-fasteners.html'"); mm_menu_0715151611_0.addMenuItem("Stainless Duplex Steel","location='Stainless-fasteners.html'"); mm_menu_0715151611_0.addMenuItem("Nickel Copper Alloy","location='nickle-fasteners.html'"); mm_menu_0715151611_0.fontWeight="bold"; mm_menu_0715151611_0.hideOnMouseOut=true; mm_menu_0715151611_0.bgColor='#108FC4'; mm_menu_0715151611_0.menuBorder=1; mm_menu_0715151611_0.menuLiteBgColor='#0E90C4'; mm_menu_0715151611_0.menuBorderBgColor='#FFFFFF'; window.mm_menu_0715151619_0 = new Menu("root",157,20,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",4,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0715151619_0.addMenuItem("ANSI: Elbow","location='steel-elbow.html'"); mm_menu_0715151619_0.addMenuItem("ANSI: Tee","location='steel-tees.html'"); mm_menu_0715151619_0.addMenuItem("ANSI: Reducer","location='steel-reducers.html'"); mm_menu_0715151619_0.addMenuItem("BS: Elbow","location='steel-elbow.html'"); mm_menu_0715151619_0.addMenuItem("BS: Tee","location='steel-tees.html'"); mm_menu_0715151619_0.addMenuItem("BS: Reducer","location='steel-reducers.html'"); mm_menu_0715151619_0.fontWeight="bold"; mm_menu_0715151619_0.hideOnMouseOut=true; mm_menu_0715151619_0.bgColor='#108FC4'; mm_menu_0715151619_0.menuBorder=1; mm_menu_0715151619_0.menuLiteBgColor='#0E90C4'; mm_menu_0715151619_0.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_1 = new Menu("Threaded Flanges",180,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 150","location='1_tf.htm'"); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 300","location='2_tf.htm'"); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 600","location='3_tf.htm'"); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 900","location='4_tf.htm'"); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 1500","location='5_tf.htm'"); mm_menu_0729172519_0_1.addMenuItem("ANSI B 16.5 Class 2500","location='6_tf.htm'"); mm_menu_0729172519_0_1.fontWeight="bold"; mm_menu_0729172519_0_1.hideOnMouseOut=true; mm_menu_0729172519_0_1.bgColor='#108FC4'; mm_menu_0729172519_0_1.menuBorder=1; mm_menu_0729172519_0_1.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_1.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_2 = new Menu("WeldNeck Flanges ",180,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 150","location='1_weldf.htm'"); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 300","location='2_weldf.htm'"); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 600","location='3_weldf.htm'"); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 900","location='4_weldf.htm'"); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 1500","location='5_weldf.htm'"); mm_menu_0729172519_0_2.addMenuItem("ANSI B 16.5 Class 2500","location='6_weldf.htm'"); mm_menu_0729172519_0_2.fontWeight="bold"; mm_menu_0729172519_0_2.hideOnMouseOut=true; mm_menu_0729172519_0_2.bgColor='#108FC4'; mm_menu_0729172519_0_2.menuBorder=1; mm_menu_0729172519_0_2.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_2.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_3 = new Menu("Blind Flanges ",180,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 150","location='1_blindf.htm'"); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 300","location='2_blindf.htm'"); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 600","location='3_blindf.htm'"); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 900","location='4_blindf.htm'"); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 1500","location='5_blindf.htm'"); mm_menu_0729172519_0_3.addMenuItem("ANSI B 16.5 Class 2500","location='6_blindf.htm'"); mm_menu_0729172519_0_3.fontWeight="bold"; mm_menu_0729172519_0_3.hideOnMouseOut=true; mm_menu_0729172519_0_3.bgColor='#108FC4'; mm_menu_0729172519_0_3.menuBorder=1; mm_menu_0729172519_0_3.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_3.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_4 = new Menu("Slip On Flanges",180,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_4.addMenuItem("ANSI B 16.5 Class 150","location='1_slipf.htm'"); mm_menu_0729172519_0_4.addMenuItem("ANSI B 16.5 Class 300","location='2_slipf.htm'"); mm_menu_0729172519_0_4.addMenuItem("ANSI B 16.5 Class 600","location='3_slipf.htm'"); mm_menu_0729172519_0_4.addMenuItem("ANSI B 16.5 Class 900","location='4_slipf.htm'"); mm_menu_0729172519_0_4.addMenuItem("ANSI B 16.5 Class 1500","location='5_slipf.htm'"); mm_menu_0729172519_0_4.fontWeight="bold"; mm_menu_0729172519_0_4.hideOnMouseOut=true; mm_menu_0729172519_0_4.bgColor='#108FC4'; mm_menu_0729172519_0_4.menuBorder=1; mm_menu_0729172519_0_4.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_4.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_5 = new Menu("DIN Flanges",160,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_5.addMenuItem("DIN 2502","location='1_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2503","location='2_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2527","location='3_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2565 / 2566","location='4_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2573 / 2576","location='5_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2627 / 2628","location='6_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2629 / 2630","location='7_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2631 DIN 2632 ","location='8_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2633","location='9_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2634","location='10_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2635 / 2636","location='11_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2637 / 2638","location='12_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2641","location='13_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2642","location='14_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 2655 / 2656","location='15_dinf.htm'"); mm_menu_0729172519_0_5.addMenuItem("DIN 86029 / 86030","location='16_dinf.htm'"); mm_menu_0729172519_0_5.fontWeight="bold"; mm_menu_0729172519_0_5.hideOnMouseOut=true; mm_menu_0729172519_0_5.bgColor='#108FC4'; mm_menu_0729172519_0_5.menuBorder=1; mm_menu_0729172519_0_5.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_5.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_6 = new Menu("Socket Welding Flanges",180,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_6.addMenuItem("ANSI B 16.5 Class 150","location='1_socketf.htm'"); mm_menu_0729172519_0_6.addMenuItem("ANSI B 16.5 Class 300","location='2_socketf.htm'"); mm_menu_0729172519_0_6.addMenuItem("ANSI B 16.5 Class 600","location='3_socketf.htm'"); mm_menu_0729172519_0_6.addMenuItem("ANSI B 16.5 Class 1500","location='4_socketf.htm'"); mm_menu_0729172519_0_6.fontWeight="bold"; mm_menu_0729172519_0_6.hideOnMouseOut=true; mm_menu_0729172519_0_6.bgColor='#108FC4'; mm_menu_0729172519_0_6.menuBorder=1; mm_menu_0729172519_0_6.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_6.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_7 = new Menu("Working Pressure",85,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_7.addMenuItem("WP304","location='1_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP310","location='2_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP 347","location='3_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP348","location='4_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP 321","location='5_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP 316","location='6_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP316H","location='7_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP 304L","location='8_workingf.htm'"); mm_menu_0729172519_0_7.addMenuItem("WP 316L","location='9_workingf.htm'"); mm_menu_0729172519_0_7.fontWeight="bold"; mm_menu_0729172519_0_7.hideOnMouseOut=true; mm_menu_0729172519_0_7.bgColor='#108FC4'; mm_menu_0729172519_0_7.menuBorder=1; mm_menu_0729172519_0_7.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_7.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0_8 = new Menu("Flange Tolerance",214,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0_8.addMenuItem("BS 1560 (ANSI B 16.5-1973)","location='1_tolf.htm'"); mm_menu_0729172519_0_8.addMenuItem("BS4504","location='2_tolf.htm'"); mm_menu_0729172519_0_8.fontWeight="bold"; mm_menu_0729172519_0_8.hideOnMouseOut=true; mm_menu_0729172519_0_8.bgColor='#108FC4'; mm_menu_0729172519_0_8.menuBorder=1; mm_menu_0729172519_0_8.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0_8.menuBorderBgColor='#FFFFFF'; window.mm_menu_0729172519_0 = new Menu("root",171,18,"Arial, Helvetica, sans-serif",12,"#FFFFFF","#FFFFFF","#0C67BA","#14A5D1","left","middle",3,0,1000,-5,7,true,true,true,0,true,true); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_1,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_2,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_3,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_4,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_5,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_6,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_7,"location='#'"); mm_menu_0729172519_0.addMenuItem(mm_menu_0729172519_0_8,"location='#'"); mm_menu_0729172519_0.fontWeight="bold"; mm_menu_0729172519_0.hideOnMouseOut=true; mm_menu_0729172519_0.childMenuIcon="arrows.gif"; mm_menu_0729172519_0.bgColor='#108FC4'; mm_menu_0729172519_0.menuBorder=1; mm_menu_0729172519_0.menuLiteBgColor='#0E90C4'; mm_menu_0729172519_0.menuBorderBgColor='#FFFFFF'; mm_menu_0729172519_0.writeMenus(); } // mmLoadMenus()
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting

stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting

 stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting


BS 1560 (ANSI B 16.5-1973)
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
SLIP-ON, SCREWED, LAPPED
SOCKET - WELD
Dim INCHES   METRIC  
Flanges size Tol. Flange size Tol
B ½ -18 +0.12
-0		 15-450 +3.2
-0
20-24 +0.19
-0		 500-600 +4.8
-0
G ½ -10 +0.03
-0		 15-250 +0.8
-0
12 – 24 +0.06
-0		 300-600 +1.6
-0
K ½ -10 +0.03
-0		 15-250 +0.8
-0
12 – 24 +0.06
-0		 300-600 +1.6
-0
O ½ -10 +0.03
-0		 15-450 +0.8
-0
12 – 24 +0.06
-0		 300-600 +1.6
-0
P ½ – 24 +0.06
-0.06		 15-600 +1.6
-1.6

WELDING-NECK
Dim. INCHES   METRIC  
Flanges size Tol. Flange size Tol
B ½ -18 +0.12
-0		 15-450 +3.2
-0
20-24 +0.19
-0		 500-600 +4.8
-0
Bore ½ -10 +0.03
-0.03		 15-250 +0.8
-0
12 – 18 +0.06
-0.06		 300-450 +1.6
-1.6
20 – 24 +0.12
-0.06		 500-600 +3.2
-1.6
J ½ -5 +0.09
-0.03		 15-125 +2.4
-0.8
6 – 24 +0.16
-0.03		 150-600 +4.0
-0.8
L ½ -10 +0.06
-0.06		 15-250 +1.6
-1.6
12 – 24 +0.12
-0.12		 300-600 +3.2
-3.2
P ½ -24 +0.06
-0.06		 15-600 +1.6
-1.6


DRILLING AND FACING TOLERANCES

Description INCHES   METRIC  
Flanges size Tol. Flange size Tol
Centre to centre of adjacent Bolt holes ½ -24 +0.03
-0.03		 15-600 +0.8
-0.8
Eccentricity between Bolt Circle diameter and Machined facing diameters ½ -2 ½ +0.03
-0.03		 15-65 +0.8
-0.8
3 – 24 +0.06
-0.06		 80-600 +1.6
-1.6

BS 1560 (ANSI B 16.5-1973) PIPE FLANGES
WELDING ENDS FOR WELDING FLANGES
Bevel for wall thickness (t) 0.19 in. (4.8mm) to 0.88 in. (22.2mm) inclusive
Bevel for wall thickness (t) greater than 0.88 in. (22.2mm)
  • A = Nominal outside diameter of pipe
  • B = Nominal inside diameter of pipe
  • t = Nominal wall thickness of pipe
Flanges to connect with stainless steel pipe of nominal wall thickness 1/8'' (3.2mm) or less. The welding ends shall be finished to a slight chamfer.

FLANGES SERRATION
The raised face of flanges 12'' (300mm) N.B. And smaller normally have a continuous serration, which is formed by a 1/16'' (1.6mm) radius tool, at a feed of 1/32'' (0.88mm) per revolution.

The raised face of flanges over 12'' (300mm) N.B. Have a 3/16'' (3.17mm) radius tool, at a feed of 3/64'' (1.19mm) per revolution.
Flanges Welding Neck Flange Bores
Pipe Flanges and Flanged Fittings
Carbon and Stainless Steel Welding
Flange Supplier
Welding Neck flange
Slip-On flange
Blind flange Exporter
Welding Neck flange Manufacturer
Forged Flanges supplier
Raised- Face Flanges
Socket Weld flange
Traders
Threaded flange
Back-Up Flange
Blind flange Maker
Stainless Steel Pipe Flange
Socket weld Flange
carbon steel plate Flange Exporter
carbon steel Flange
Titanium Flanges

 Incolloy Flanges
Cupro nickel Flanges
Niobium Flanges
Nimonics Flanges
HR Alloy Flanges
Alloy 20 Flanges
Monel Flanges
Inconel Flanges
Stainless steel Flanges
Super Duplex Flanges
Flanges Importers Supplier in India Flanges
Flanges Exporter in Mumbai Flanges
Stockist Supplier of Flangess Stockiest Flanges
Flanges Manufacturers Flanges
Weldneck Flanges
Slipon Flanges
Tantalum Flanges
Nickel Flanges
Zirconium Flanges
Hastelloy Flanges		 Blind Flanges
Socket Weld Flanges
Lap Joint Flanges
Spectacles Flanges
Ringjoint Flanges
Orifcase Flanges
Long Weldneck Flanges
Deck Flanges
Back up Flanges
threaded Flanges
Raised Face Flanges
ANSI B 16.5 Class 150 lb Flanges
300 Flanges
600 Flanges
900 Flanges
1500 Flanges
2500 Flanges
Din Flanges
Windsro Exportes
All Flange Exports From india
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
 
stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings, sheets plates round bar, wire, forged fitting, buttweld fitting
   

 Home | About Us | Products | Quality | Inquiry Form | Contact